Creating and Modifying an Order Set in CHCS December 17, 2012 Implementation and Training Directorate Delois Klemm, Director 703-882-3918; delois.klemm@tma.osd.mil Ronald Anderson, Deputy Director, Garrison Products 703-882-3950; ronald.anderson@tma.osd.mil

Type “SET”; ENTER

Creating an Order Set 1) Free-text the name of a New Order Set; ENTER Type “Y”; ENTER

Press ENTER to move your cursor through each modifiable option on the screen until you have File/Exit(ed).

1) ENTER 2) Enter Order Type (i.e. Lab, Rad, RX, or Con); ENTER 3) Type in the desired Lab, Rad, Rx, or Con; ENTER Depending on what Order Type you entered, you will be taken through the ordering process for that Order Type. The following slides only demonstrate a lab order.

Schedule Type is defaulted for “Now”, but you can change this if desired; ENTER, ENTER, ENTER, ENTER if you are okay with the defaults. Type in a comment; ENTER

1) ENTER 2) Enter Order Type (i.e. RX); ENTER 3) Type in the desired medication; ENTER 4) Type in the number of the medication; ENTER 5) Type in the SIG; ENTER

Input a QTY; ENTER Input Refills;

1) ENTER 2) ENTER

1) ENTER 2) Enter Order Type (i.e. Rad); ENTER 3) Type in the desired procedure; ENTER 4) Type in the number of the procedure; ENTER

You must type in a Clinical Impression; ENTER ENTER through each field until you ENTER

Option 1: Step 1-Quit and Save “Q” to save and quit; ENTER

Option 1: Step 2, ENTER.

Option 2: Modifying an Order Set Free-text the name of an Existing Order Set; ENTER

Option 2: Step 2 ENTER, ENTER, ENTER, ENTER.

Option 2: Step 3-Modify Type “M” to modify, or “D” to delete specific orders; ENTER

Option 2: Step 4-Select Item to Modify Use the END key to select the order(s) you need to modify; ENTER

Option 2: Step 5-Change Item Press ENTER to move your cursor through each modifiable option on the screen until you have File/Exit(ed).

Option 2: Step 6-Save Changes ENTER

Option 2: Step 7-ENTER

Option 2: Step 8-Quit and Save “Q” to save and quit; ENTER