Persiapan koneksi di POLIJE Sritrusta Sukaridhoto

VLAN VLAN Database Penunjukan port VLAN dengan router VLAN Trunk

VLAN Database # show vlan # vlan database (vlan)# vlan 10 name tani (vlan)# vlan 20 name elektro (vlan)# exit

Penunjukan port # conf t (config)# int fa0/1 (config-if)# switchport access vlan 10 (config-if)# int fa0/2 (config-if)# switchport access vlan 20

VLAN dengan router(1) Gunakan interface di router # conf t (config)# int fa0/0 (config-if)# ip add (config-if)# no shut (config-if)# int fa0/1 (config-if)# ip add

VLAN dengan router (2) Tiap-tiap PC ditambahkan default gtw ke arah IP yang di router sesuai dengan VLAN nya Kelemahan: boros di kabel, apabila jumlah vlan banyak.

VLAN Trunk (1) Di sisi router –# conf t –(config)# int fa0/0.1 –(config-subif)# encapsulation dot1q 10 –(config-subif)# ip add –(config-subif)# no shut –(config-subif)# int fa0/0.2 –(config-subif)# encapsulation dot1q 20 –(config-subif)# ip add –(config-subif)# no shut

VLAN Trunk (2) Di sisi switch –# conf t –(config)# int fa0/24 –(config-if)# switchport mode trunk

Routing Cisco Di sisi inherent –# show ip route Configurasi tiap arah jurusan –# conf t Tambah ke arah PENS –(config)# ip route Tambah ke arah ITB, dst –(config)# ip route

Routing cisco Disisi PENS –#conf t tambah ke arah ITB –(config)# ip route tambah ke arah Polije –(config)# ip route

Dynamic Routing (OSPF) # conf t (config)# router ospf 1 (config-router)# network area 0 (config-router)# network area 0 # show ip route