www. otis.com

An Innovation for the New Millennium

Generation One Generation Two

Gen2 Components Product Overview 1 - Machine 2 - Controller 3 - Coated steel belt 4 - Governor 6- Door operator 5 - Emergency & inspection panel

So What’s New about GEN 2 ? Revolutionary New Coated Steel Belts

FLAT COATED STEEL BELT Conventional Steel Rope Flat Coated Steel Belt Quiet & Strong“Green” & Flexible Less stretch

300 Grams/ meter 220 Grams/ meter Product Overview Coated Steel Belt

(HALT) Highly Accelerated Life Testing –indicates belts will last 3 X the life of hoist ropes under similar conditions Product Overview Safety and Testing  High Cycle Fatigue - - Used by Pratt & Whitney - tested for 120 million cycles without failure

Simulated Fire in the hoistway Melted and burned the Polyurethane coating The damaged Coated Steel Belt was able to: Product Overview Safety and Testing -hold the load -maintain traction -even during an emergency stop

GeN2 Comfort – SPECIAL FEATURES “Pulse” electronic monitoring Continuously monitoring the belt’s steel cords 24h/7d Reducing the downtime Increasing the reliability of the inspection Otis ‘Pulse’ system monitors belt cords integrity 24h/7d.

Machine Product Overview Major Innovation

Machine  The Gearless Machine Operates at 90% efficiency  Compared to other Gearless Machines which operate at 75-85% efficiency Product Overview

GEARLESS PM SYNCHRONOUS MOTOR Gearless machine PM motor Embedded PM Sealed bearings Radial design

Gearless machine Embedded PM Motor Radial Air Gap design Lower rotational inertia Sealed Bearings Smaller Size Lighter Weight Brake disc – maintenance-free Digital Encoder Rescue Encoder Temperature Sensors Sound Isolation Pads Machine – Key features GEARLESS PM SYNCHRONOUS MOTOR

 Drive sheave and motor shaft are one piece  An electromagnetic Disc brake no longer requires field maintenance  Sealed Bearings/no gear box – No oil Product Overview Machine

SIZE COMPARAISON

E & I Panel Located at the top landing Provides all controls necessary to perform rescue and inspection operations Product Overview

 Fast and easy access on top landing  Car Position Indicator  Electrically released brake  Quiet, no moving parts Product Overview Emergency and Inspection Panel

Safe Operation Lambda 2 D Product Overview Door Protection System Characteristics

 The load-weighing system measures car load before a run  Motor torque is adjusted prior to brake lift to prevent roll- back or roll-forward  Closed loop control with Digital Feedback of position and speed guarantees consistent performance regardless of the load  Consistent stopping accuracy  Jerk free motion Digital Encoder Prescribed Profile Load-weighing sensor CLOSED LOOP MOTION CONTROL

DRIVE Variable Frequency Drive OVF20 CR – Energy Efficient Sleep or Suspend mode Vector Control –Maximum Torque down to Zero Speed –Consistent Speed Control with Low Vibrations –Fast Dynamic Response –Reduce Start Jerk Closed loop – Digital Encoder – Load weighing – Pre-torquing Consistent Efficient Control

CLOSED LOOP MOTION CONTROL Prescribed Profile Digital Feedback Position and Speed Position Reference System Load Weighing Car and Hall calls

Features and Benefits Space Saving Advantages of Machine roomless design of the Gen2 -No need for a separate machine room -Improved net rentable space. -No visual pollution on the roof -Reduced overhead and pit space. Savings

Features and Benefits –Robust design –Gearless machine –Sealed bearings –Built-in diagnostics –Coated Steel Belts Features that enhance Reliability Product Overview

Ride Comfort Features that enhance Ride Comfort –Gearless machine with VF drive –Digital Control –Isolated machine and car frame –Quiet controller, drive and brake –Coated Steel belt reduces noise and vibration in the car Product Overview

Features and Benefits Features that enhance Environmental protection No visual pollution Efficient use of space Reduced energy consumption No electrical pollution No oils or lubricants Reduced noise and vibration to the building Market Requirements

Summary Revolutionary new lift design Environmentally friendly Developed with safety and the environment as key considerations and….

IMAGINE What can be done in instead of the machine room ?

Thank you