Company presentation Duma Optronics Ltd All rights Reserved

Introduction Duma Optronics is a well established and rapidly growing company specializes in Electro-Optical and laser instrumentation technology. The company was established in 1989 by a group of researchers to serve the Optronics industry with innovative products. Duma Optronics currently employs 25 employees, most of them are engaged in R&D, and includes specialists in optical design, E-O systems, electronic signal processing and computerized imaging. The company is privately owned. in

Introduction [cont. Duma Optronics Ltd All rights Reserved. Duma Optronics is located in Nesher, near Haifa bay Israel Duma Optronics products are distributed worldwide by leading OEM companies in the electro-optics market. as well as by local distributors in Europe, USA and Asia.

Copyright Duma Optronics Ltd All rights Reserved High Power Beam Analysis Electronic Autocollimator Positioning & Alignment Beam Analysis Main product lines

Duma Optronics Ltd All rights Reserved Positioning & Alignment Measures beam position. Variety of models based on CCD’s, CMOS, Lateral-Efect or Four-Quadrant PSD’s. Analog version up to 60KHz. Digital: USB/Stand Alone versions. Wide spectral range. Large detection area available. SpotOn family Alignment compact laser, pointing stability less than 1µRad and divergence less than 9.5mRad. Built-in screws for fine beam direction adjustment. Battery/Power supply operated Simultaneous measurements of laser beam deviations with respect to the housing (Angle) and of beam power. A variety of models including PSD’s and CMOS type detectors. Wide aperture models available with various lens types. Simultaneous measurements of Position, Angular and Power displacements. Position accuracy down to 1µm, angle accuracy down to µRad range. LaserOn AlignMeterAngleMeter Positioning and Alignment main products

SpotOn Family SpotOn CCD SpotOn USB SpotOn compact Dum Spot L-44 SpotOn ANALOG-USB

Duma Optronics Ltd All rights Reserved Simultaneous measurement of both position and angle deviation. Complete system, including a USB2.0 attachment, a measuring head composed of two Lateral Effect PSD's assembled to a calibrated beam splitter assembly, including: a beam splitter, a collimated lens and a lens tube, and a software package for Windows. Windows 2000/ XP/ W7 A variety of sensor heads which differ from each other mainly by the lens focal length. The standard configuration is f=100mm, other common combinations are f=50mm and f=200mm. Highlight product : Sophisticated solution for accurate alignment tasks. AlignMeter

Duma Optronics Ltd All rights Reserved Electronic Autocollimator Main Applications: CD/DVD ROM alignment Measurement of wedge, prism and polygon angle Measurement of reflecting surface parallelism Measurement of surface flatness Alignment of optical setups Machine alignment Thermal stability measurements Straightness measurement of linear stages Characterization of rotation stage Measurement of mirror angle Vibration analysis

Duma Optronics Ltd All rights Reserved Electronic Autocollimator Specifications: Autocollimator [spec.] - Light Source Autocollimator 42' (H) (2520 sec of arc) Telescope 84' (H) (5040 sec of arc) Resolution 0.1sec Accuracy 2.5 sec CCD 1/2" (1/3’’) Light source LED Interface USB 2.0 Aperture 36 mm Integral adjustable mechanics Built in alignment laser

Duma Optronics Ltd All rights Reserved Beam Analysis Measures microscopic beams of less than 0.5µm, both CW and pulsed beams. Interface: USB2.0. A CCD beam profiler having a wide spectral range, measures CW or pulsed beams. Extensive analysis of laser beam parameters. Interface: USB2.0. Multiple knife-edge Beam profiler. High accuracy. Wide spectral range. High resolution. Down to 2 µm size General beam profiler for projected laser beam measurements 1.4 Mega pixel CCD Beam Profiler 12 Bit resolution Beam Analyzer stand alone Touch Beam Analyzer BeamOn µBeam BeamOn HR AFW BeamOn Long Bow Beam Analysis main products

Duma Optronics Ltd All rights Reserved Complete system for Laser Beam Analysis, composed of a CCD camera head, a set of 3xNG Schott colored filters (NG4, NG9, NG10) in housing, a PCI card or a USB 2.0 attachment, software on CD disk, carrying case, user manual. Select PC interface when ordering. Expanding your Profiling Capabilities BeamOn

BeamOn HR 1.4 Mega pixel CCD Beam Profiler 12 Bit resolution A complete test station measuring Profile, Power and Position, both for CW and Pulsed beams. Based on a USB 2.0 interface for notebooks. Offered with a complete set for larger beams and high power attenuation. The system comes with a camera, Filter wheel, a standard USB 2.0 cable, a post, a set of 3xND filters in housing, power supply 6V DC, software on CD disk and carrying case. New: BeamOn HR Automatic Motorized FW New: Beam on HR 1550: A camera for 1550nm+/50nm

BeamOn 2/3 The BeamOn 2/3 CCD system is a beam diagnostics measurement system for real-time measurement of continuous or pulsed laser beams. Its 2/3” CCD sensor allow him to cover larger beam size with an active area of: 8.5mmX6.35mm, and pixel size of 11.6µmx11.2µm. It provides laser beam parameters, such as: beam width, shape, position, power, and intensity profiles. The BeamOn 2/3 is based on a USB attachment, run on Windows XP/2000/ 7 (32 & 64 bit).

Duma Optronics Ltd All rights Reserved BeamOn Long-bow - Measures general light beams like: solar beams projected from remote - General beam profiler for projected laser beam measurements - Measurement of UV beam through wavelength conversion - Measurement of beam wondering Applications BeamOn Long-Bow

Duma Optronics Ltd All rights Reserved Long-bow [cont.] Specifications - Spectral range 350 – 1310nm - Zoom ratio X25 optical, X2 digital - Electronic shutter 1/3 – 1/10000 sec - Gain: software controllable - USB2.0 interface - Electronic shutter controllable by computer - Angle of view 45÷ wide-end to 2÷ tele-end - Minimum working distance 800mm tele-end - Signal to noise ratio 50 dB - Frame rate 25 Hz - Filters included: 3 optical filters 1/8, 1 ND filter 1/400 BeamOn Long-Bow [cont.]

Duma Optronics Ltd All rights Reserved The analyzer for microscopic beams Beam Analysis The µBeam is beam diagnostics measurement system for real-time measurement and display of small CW or pulsed lasers in the sub-micron range, fiber optic and laser diode beam profiles. Main features include: measure beam of less than 0.5µm (FWHM), handles CW or pulses, having a long working distance, using a high resolution CCD response range, optical zooming for fast beam finding It is running under Windows 2000 or XP, Vista and Win7, via the USB port. µBeam

Duma Optronics Ltd All rights Reserved Multiple Scanning Knife Edge Beam Profiler Beam Analysis Patented Technology: Unique tomographic image reconstruction of 2D/3D images Versatile: measure beam profile, beam size, beam shape, position and power. Flexible: Wide spectral range, from 190nm through 1800nm Accurate: Beam sizes from 3µm to 9mm with 0.1µm resolution Based on USB 2.0 interface New: 12 bit A/D New: IR Enhanced detector (E) – 1200 – 2700nm Beam Analyzer

Beam Analyzer Touch Stand alone version of Beam Analyzer with Touch screen and Windows7

High Power Beam Analysis product line Article

Beam Analyzer High PowerBeamOn High Power SpotOn High Power

Software The unit provide horizontal and vertical profiles in 2D and 3D, Beam size, beam position and Power measurement.

ESO & Duma Optronics ESO is working with Duma Optronics for the last few years using and purchasing alignment and beam profiling instrumentation.

Thank You for Your Time and Your Attention! Thank You for Your Time and Your Attention! Duma Optronics Ltd All rights Reserved Duma Optronics Ltd. 1st Hazait street POB 3370 Nesher Israel Tel: Fax: Website: Contact information