11 September 2008 Paris Proposed changes to the EEC UN Regulations 29 Russian Federation GRSP/INF/CS/14

Frontal impact (Test A) Pendulum energy: - N1 – [15] kJ - N2 ≤ 7,5t – [25] kJ - N2 > 7,5t and N3 – 40 kJ Pendulum: - dimensions: h=600 mm; l=1000 mm - weight m = kg Pendulum position: c= 50±5mm ( 50±5 mm below point H (R)), chain-hanged pendulum, L≥3500 mm, b≥800 mm, a=30 mm Test A may be skipped for N1 cargo vehicles based on an already tested model that fulfills the requirements of the EEC UN Regulations #94 (or equivalent regulatory documents). Russian Federation N1 and N2 ≤ 7,5 t - Regulation No. 29 series 02 2 Russian Federation (GRSP/2007/14) (GRSP/2007/02) Current UNECE R Pendulum energy: N ≤ 7,0t – 29,4 kJ N > 7,0t – 44,1 kJ Pendulum: dimensions: h=800 mm; l=2500 mm weight m = 1500 ±250 kg

3 Russian Federation Pendulum energy: N1 and N2 ≤ 7,5t – Regulation № 29 series 02 N2 > 7,5t and N3 – 78,4 kJ Impact energy; At least for N1 vehicles, allow UNECE R33 or UNECE R94 as alternative Pendulum: - dimensions: h=800 mm; l=2500 mm weight m = 2500 – 3000 kg Pendulum position: c=50±5mm ( 50±5 mm below point H (R)) Test A (as proposed by the Russian Federation) New proposal

4 Russian Federation

A-pillar test (test B) 5 (GRSP/2007/02)

Pendulum energy: N1 and N2 ≤ 7,5t – Regulation № 29 series 02 N2 > 7,5t and N3 – 29,4 kJ Impact energy; Pendulum: - dimensions: d=600 mm; l=2500 mm weight m ≥ 1000 kg Pendulum position: The pendulum shall strike at the point located at the middle of the cabin glass in the vertical plane. Russian Federation 6 Test B (as proposed by the Russian Federation) New proposal

Roof strength testing (Test B) Static load P =[К]х PCH≤10т, where PCH – full load of the vehicle that falls to the front axle; K =2,5 – dynamic load coefficient. Test B may be skipped for N1 cargo vehicles based on an already tested model that fulfills the requirements of the EEC UN Regulations № 94 (or equivalent regulatory documents). Russian Federation (Test C) 7 Russian Federation (GRSP/2007/14) (GRSP/2007/02) Current UNECE R29. 02

8 Russian Federation Static load: N2 > 7,5t and N3 P = К х PCH ≤ 10т, where PCH – full load of the vehicle that falls to the front axle; K =2,5 – dynamic load coefficient. Test C (as proposed by the Russian Federation) N1 and N2 ≤ 7,5t – Regulation № 29 series 02 New proposal

Back part strength testing (Test C) Pendulum energy: - for N1 Category – 10 kJ - for N2 Category – 20 kJ - for N3 Category – 40 kJ Pendulum: - dimensions: h=500 mm; l=1600 mm weight m = 1000kg Pendulum position: - the center of the strike must coincide with the central axial plane of the back wall and be located in the middle between the floor and the roof of the cabin; - chain-hanged pendulum, L≥3500 mm, b≥800 mm Russian Federation 9 (GRSP/2007/14) Current UNECE R Rear wall test Load: 1,96 kH per tonne payload

Pendulum energy: N2 > 7,5t and N3 – 29,4 kJ Pendulum: dimensions: h=500 mm; l=1600 mm weight m = 1000kg Test D (as proposed by the Russian Federation) 10 Russian Federation N1 and N2 ≤ 7,5t – Regulation № 29 series 02 New proposal

11 Russian Federation Test A Test B Test C Test D Proposition of the Russian Federation

Thanks for attention! Russian Federation