Tri-Tech Medical Inc. Medical Gas Outlets

Medical Gas Outlets DISS Ohmeda style Allied style Puritan style Recessed wall DISS Recessed ceiling Surface wall Console / Headwall Ambulance / Surgical Arm

Common Backs Recessed/Console Ambulance/ Surgical Arm 360º swivel inlet tube 1/2” OD copper tubing Accommodates all styles of Outlet Latch Plates ETL listed Ambulance/ Surgical Arm 360º swivel inlet tube DISS or hose barb Accommodates all styles of Outlet Latch Plates ETL listed

DISS Outlets Frontall™ design Gangable Full faceplate color coding 5 inch centers Primary & secondary checks 360° positioning of extension tube

DISS Surface Outlets Frontall™ design Full faceplate color coding Primary & secondary checks

Frontall™ Feature Allows routine service of both the primary and secondary check valves without removing the nameplate or gas specific portions. Very fast & easy to service Primary check cartridge

Repairing DISS Front Bodies These parts would be ordered separately Cartridge (Negative and Positive gases) Primary Check Seat and Ball Check (Positive gases only) Chrome-Plated Body

Ohmeda Style Outlets

Ohmeda Style Outlets Accepts Ohmeda gas specific compatible male adaptors Gangable 5” centers Allows routine service of both the primary and secondary check valves. Full faceplate color coding

Ohmeda Style Surface Outlet Accepts Ohmeda gas specific compatible male adaptors Allows routine service of both the primary and secondary check valves. Full faceplate color coding

Repairing Ohmeda style fronts Remove screws Remove body and plate

U-clip and washer remain. Front body and plate

Replace body Replace plate and screw

XQ1000-D Ohmeda style Front Latch Body Can be ordered as an assembly, or in parts

Allied Style Outlets

Allied Style Outlets Accepts Allied style gas specific compatible male adapters Gangable, 5” centers Full faceplate color coding 1/2” OD copper tubing Metal back and front plates 360º swivel inlet tube

Allied Style Surface Outlets Accepts Allied gas specific compatible male adapters Full faceplate color coding

Repairing an Allied Style Front Remove screws Remove body and plate

Place body on housing and replace plate Position o-ring and washer on new body

Replace Screws

XA1000-D Front Latch Body Can be ordered as an assembly, or in parts

Puritan Style Outlets

Puritan Style Outlets Accepts Puritan style gas specific compatible male adapters Gangable, 5” centers Full faceplate color coding 1/2” OD copper tubing Metal back and front plates 360º swivel inlet tube

Puritan Style Outlets Accepts Puritan gas specific compatible male adapters Full faceplate color coding

Repairing a Puritan Style Front Using manual screwdriver, remove screws Remove body and small plate

Remove ONLY these parts

Screw plate back in place with Manual screwdriver. Do not over tighten Replace parts or entire body

XP1000-E Puritan Latch Body Can be ordered as an assembly or in parts

Console / Headwall Outlets Available in DISS, Ohmeda, Puritan and Allied styles DISS style includes Frontall™ features Full faceplate color coding Optional trim plate available

Console / Headwall Outlets

Console / Headwall Outlets

Ambulance / Surgical Arm Outlets Available in DISS and Quick Connect styles DISS and hose barb inlet connections DISS includes Frontall™ features Full faceplate color coding

DISS x ¼” npt outlets and DISS x hose barb outlets

Fairfield Rail

Fairfield Rail Outlets Three different styles

Outlet Conversion Kits

Conversion Kits

Conversion Kit - Disassembly

Conversion Kits - Disassembly

Conversion Kits - Installation

Trim Plates Single gang through six gang Large array of on center spacing Can be customized to meet your needs

Ohmeda to Ohmeda Conversion Kits Available for Diamond I to Diamond III Available for Diamond II to Diamond III Easy to install Easy to service

Other Ohmeda Conversion Kits Available for Melco/Foregger/Linde 9/16-18 and Chemetron/NCG to Diamond III Easy to install and service

NFPA 99 REQUIREMENTS FOR STATION OUTLETS/INLETS TRI-TECH PRODUCT GAS SPECIFIC YES STATION OUTLET TO HAVE PRIMARY AND SECONDARY CHECK YES STATION INLET TO HAVE PRIMARY CHECK (SECONDARY CHECK PERMITTED) YES SECONDARY VALVE TO CLOSE WHEN PRIMARY VALVE IS REMOVED YES EACH OUTLET/INLET LEGIBLY IDENTIFIED ACCORDING TO 5.1.11.3 YES THREADED OUTLETS/INLETS SHALL COMPLY WITH CGA V-5 (DISS) YES STATION OUTLET/INLET COMPONENTS THAT ARE GAS SPECIFIC NOT INTERCHANGEABLE YES COPPER TUBES ON STATION OUTLETS SHALL BE 3/8 OD MIN AND LESS THAN 8 INCHES LONG YES COPPER TUBES ON STATION INLETS SHALL BE ½ OD MIN ADDITIONAL TESTING PERFORMED BY TRI-TECH INITIAL PRESSURE TEST AND FINAL TIE IN TEST REQUIRED FOR LEAKAGE AS WELL AS THE OPERATIONAL PRESSURE TEST REQUIRED FOR FLOW IS PERFORMED ON ALL STATION OUTLETS/INLETS PRIOR TO SHIPPING

Gas Control Panels and Gas Control Panel Conversion Kits Tri-Tech Medical Inc. Gas Control Panels and Gas Control Panel Conversion Kits

Gas Control Panel Stainless steel front Self-relieving regulator Frontall™ DISS outlet features High quality ball valve Painted steel rough-in box 2” Inlet & outlet pressure gauges

MIDAS REX EQUIPMENT: APPROX 5% OF TOOLS IN FIELD ARE OLDER TOOLS REQUIRING 50 - 200 PSI - 900 CFH - 425 LPM NEW TOOLS REQUIRE 20 - 120 PSI - 720 CFH - 340 LPM OR 481 CFH - 227 LPM NITROGEN CONTROL PANEL MAXIMUM FLOW CAPACITY BASED ON 180 PSI INLET FLOWING TO ATMOSPHERE STATIC DEL FLOW FLOW DEL PRESS PRESSURE PSIG SCFH LPM FLOWING PSIG 100 930 440 96 110 1030 486 106 120 1110 524 114 130 1150 543 119 150 1175 555 120 170 1180 557 120

Gas Control Panel Conversion Converts existing panels by several major brands Same features as our regular panel Easy to install using a universal mounting plate over existing back box

Gas Control Panel Conversion Existing back box

Gas Control Panel Conversion Installing conversion connections

Gas Control Panel Conversion Installing conversion plate

Gas Control Panel Conversion Back of the front panel conversion

Gas Control Panel Conversion Connecting tube

Gas Control Panel Conversion Installing gas control panel