Product Technical Document Model Name Document NO. KX-TDE100 / KX-TDE200 / KX-TDE600 H-CAB-A-E-10000 Title KX-TDE100-200 MPR V2.01 KX-TDE100-200-600 MPR Version 3 Product Specification Total Page : 19 Rev.1.3 July 14, 2009 Note : - Specifications are subject to change without notice. - Specifications for TDA and NCP in this document are for reference. - TDA50 is model name of TDA30 in US market. - This document is not applied for Japan market. ©2009 Panasonic Communications CO., LTD. Communication Network Company Issued by Approved by Checked by Prepared by S. Mitsuo T. Yoshida K. Ryu R. Nonaka July 14, 2009 July 10, 2009 July 9, 2009 Copy to Panasonic sales company Representative sales agency PRDCM PCCUK / PCCSW / PCC-OST

Revision Revision Item Explanation Prepared by 0.1 All 1st draft 0.2 R. Nonaka May 30, 2008 0.2 2nd draft R. Nonaka August 26, 2008 1.0 Official release Content does not change from revision 0.2. R. Nonaka September 8, 2008 1.1 ABC DEF Features based on market request are added. R. Nonaka November 6, 2008 1 32 IP-GW(H.323) + 32 SIP-GW for V3 Total 32 ch for V2 2 Feature Enhancement for SIP SLT step 2 TDE MPR V3 => V4 13 TDE100-200 SMDR : 10,000 calls TDE600 SMDR : 20,000 calls

Revision Revision Item Explanation Prepared by 1.2 A Condition is added to conference improvement. R. Nonaka December 15, 2008 G CSTA “Button Press” works without “Enhanced Feature” activation key. H Default data is revised. 1 More than 49ch talking is under study for V4. 13 Condition is added to SMDR expansion. 1.3 ABCD 1 These were planned at version 4 for NCP. (Previous information was “V4 Study”) R. Nonaka July 9, 2009 2 5 SIP extension more enhancement and IP expansion card were dropped from version 4 for TDE and NCP. (Previous information was “V4 Study”) 6 ESVM hardware on TDE100-200 MPR is updated to new version. Mass production change is informed by PCR. Default of dial tone is revised from 10s to 250s.

Feature Enhancement No. Feature Explanation NCP TDE A Conference feature improvement - Broadcast feature supports 2nd mode newly. 1) Broadcasting mode (Same as current spec) Max.32 parties / one way talk at first 2) Group call conference mode Max.8 parties / 2 way talk without operation by coordinator - Public CO call is supported for broadcast feature (both modes). - Remote users can join during broadcasting (both modes) through DISA using PIN, even if they could not answer call from coordinator. DISA is released automatically after join. - Broadcast member can be assigned by CSTA as well as PCMC. MPR V4 (Planned) MPR V3 TDA : N/A N/A For USA KX-TDE DISA Record conference to Softphone

Feature Enhancement No. Feature Explanation NCP TDE B Common extension numbering for 2 or more PBXs - Only for H.323 supported by MPR card MPR V4 (Planned) MPR V3 Fukuoka Office Tokyo Office 2nd Floor IP Network 201 306 103 1st Floor 301 104 105 101 102 205 TDA : N/A

Feature Enhancement No. Feature Explanation NCP TDE C CLIP of extension which set Fwd can be informed to ISDN by option. MPR V4 (Planned) MPR V3 D ARS for dial 011 and 0 is supported. - Even if ARS for dial 011 (International call from North America) is assigned, dial 0 (call operator of telephone company) is available. E DECT distinctive ringing for ICD group call is supported. - This feature can be enabled by PCMC sales company level. MPR V2 F Softphone controlled by MPR also can be tried without activation key, when user can log in to CA Pro trial mode. - Software version up of XP/Vista/Mobile Softphone (in CA) is not required for this improvement. - XP/Vista Softphone controlled by IP extension card has trial mode since version 1. TDA : N/A TDA : N/A TDA : N/A TDA : N/A

Feature Enhancement No. Feature Explanation NCP TDE G CSTA “Button Press” works without “Enhanced Feature” activation key. - Communication Assistant version 2 supports transfer retrieve. “Button Press” is used for the feature. MPR V2 MPR V3 H Default data is revised. - Built in Communication Assistant : “Disable” to “Enable” - Hold Tone to IP-PT : Change to same tone as TDA - Flash key mode : “Recall” to “EFA” (Only for USA and Canada) - Dial Tone Timer : 10s to 250s -10s was not enough for CA user and NT400 user to search contact for transfer. - Dial tone for TD1232 does not have timer limitation. - This default change helps the UCD agents with held call to make their status busy for more long time by keeping the phone off-hook. Even this timer expires a hold recall will take the place of it to keep their status busy. (Currently UCD agent may receive new other incoming call after hold + 10s dial tone and 10s reorder tone.) TDA : N/A TDA : N/A

Feature Enhancement No. Feature Explanation NCP TDE 1 128 IP-PT by MPR card is supported. MPR V4 (Planned) MPR V3 2 Feature enhancement for SIP-SLT Step 2 - Unscreened Transfer for SIP-SLT except KX-HGT100. - PBX feature support by dial “flexible numbering” step 2 MPR V4 Drop MPR V4 Drop 2A Feature enhancement for SIP-SLT Step 1 - Unscreened Transfer for Panasonic KX-HGT100. - PBX feature support by dial “flexible numbering” step 1 MPR V2 Virtual Card in MPR MPR V2 Limitation 32ch IP-PT Card (incl. Softphone) 2 cards (64ch) 4 cards (128ch) 32ch SIP Ext Card 16ch SIP CO Card 2 cards (32ch) 3 cards (32ch) 16ch IP-GW Card MPR V3 4 cards (128ch) 8 cards (192ch) *2) 2 cards (32ch) 4 cards (64 ch) *1) *1) 32(V2) -> 64(V3) is supported. *2) 49ch talking at the same time except IP extension P2P talk. More than 49ch talking is planned for V4. TDA : N/A TDA : N/A TDA : N/A

Feature Enhancement No. Feature Explanation NCP TDE 3 Built-in Communication Assistant and NT400 are supported. Specification is basically same as CA for NCP1000. Max. 128 users (NT400 : 64) Log-in user number without activation key is as follows. < CA > < PA > Reference MPR V1 MPR V2 for NT400 MPR V3 4 CTI for system wireless extension is supported. Specification is basically same as NCP1000. MPR V2 Actually 240 CA is supported by TDE (Not NCP) without PCMC sales company level programming. But official spec is 128. PBX CA Pro Trial (60 days) CA Basic (No limit) NCP1000 2 users 5 users TDE100-200 4 users 10 users TDE600 8 users 20 users PBX PA Pro Trial (60 days) PA Express (No limit) TDA30/50 2 users 5 users TDE100-200 4 users 10 users TDE600 8 users 20 users TDA : N/A TDA : N/A

Virtual Card for 32 ch IP-PT Card or 32 ch SIP Ext Card Feature Enhancement No. Feature Explanation NCP TDE 5 IP-CS is supported. Specification is basically same as NCP1000. MPR V2 MPR V3 TDA : N/A PBX A. IP-CS 8 ch B. D-PT CS 8 ch C. Other CS 2ch / 4 ch MAX.CS B x 2 + C (A+B) x 2 + C NCP500 8 units 2 units 4 units 4 --- NCP1000 8 TDE100-200 16 units 32 units 32 TDE600 64 units 128 units 128 Total 128 ch with IP Extension in MPR *) 49 ch talking at the same time Virtual Card for 32 ch IP-PT Card or 32 ch SIP Ext Card Virtual Card for 4 IP-CS IP-CS 4 cards / 128 ch 0 card 0 unit / 0 ch 3 cards / 96 ch 1 card 4 units / 32 ch 2 cards / 64 ch 2 cards 8 units / 64 ch 1 card / 32 ch 3 cards 12 units / 96 ch 0 card / 0 ch 4 cards 16 units / 128 ch more 48 units with IP Expansion Card (MPR V4 : Study) = Total 64 units (Target) => IP Expansion Card was dropped from version 4.

Feature Enhancement No. Feature Explanation NCP TDE 100 200 TDE 600 6 Music on Hold by ESVM card is supported. - One ch of ESVM card is occupied only for one MOH. - New hardware version (for high quality recording) is recommend for music on hold feature. *) ESVM hardware on TDE100-200 MPR is updated to new version. Mass production change is informed by PCR. MPR V3 software supports both ESVM old and new hardware version. MPR V2 MPR V3 PBX ESVM Card Max. Installation Music on Hold Max. CH NCP500-1000 4 cards 1 ch by external + 6 ch by ESVM TDE100-200 2 ch by external + 6 ch by ESVM TDE600 16 cards SVM Card Hardware Version CH on NCP500-1000 MPR New 2 on TDE100-200 MPR Old to New *) on TDE600 MPR ESVM2 / ESVM4 for OPB3 2 / 4 TDA : N/A

Feature Enhancement No. Feature Explanation NCP TDE 100 200 TDE 600 7 Screened transfer from cellular phone is supported as well as unscreened transfer. - Screened transfer to extension (# + Ext No.) - Screened transfer using paging (# + *33 + Group No.) - Conference (# + Ext No. + # + 3) MPR V2 MPR V3 8 DDI number for cellular extension is informed as CLIP when call is made through DISA from cellular phone. - Currently caller ID of cellular phone or CLIP on CO line is informed. 9 Busy Display by DSS Key when cellular phone is busy. MPR V1 10 Intercept for call forwarded to CO (cellular phone, network extension and so on) is supported. 11 Transfer recall to Intercept destination is supported. Transfer recall to VM Group is supported. MPR V2.01 TDA : N/A TDA : N/A TDA : N/A TDA600 : N/A TDA30/50-100-200 : MPR V5 TDA600 : N/A TDA30/50-100-200 : MPR V5

Feature Enhancement No. Feature Explanation NCP TDE 100 200 TDE 600 12 Hotel “Cleaned Up” button is supported. - Operation using PT is basically same as [Check-in] button. - Control from CTI is also available. MPR V1 MPR V3 MPR V2 13 SMDR Expansion by MEC card is supported. - KX-TDE0105 works for TDE100-200 as well as TDE600. *) SMDR 10,000 calls + Hotel 8,000 calls are available by PCMC sales company level with MEC. MPR V4 Study TDA600 : N/A TDA30/50-100-200 : MPR V5 PBX SMDR Hotel w/o MEC with MEC TDA30/50 200 calls N/A TDA100-200 4,000 calls TDA600 1,000 calls 8,000 calls NCP500-1000 TDE100-200 V2 TDE100-200 V3 10,000 calls TDE600 V2 TDE600 V3 *) 20,000 calls

Feature Enhancement No. Feature Explanation NCP TDE 100 200 TDE 600 14 2 CLIP for one extension is supported. - ARS itemized code can be 2nd CLIP by option. MPR V2 MPR V3 15 Automatic recover from analog CO busy out is supported. 16 One channel activation key is supported. - One channel activation key for TDE600 works for TDE100-200 also. MPR V1 MPR V2.01 17 Message waiting for Panasonic SIP-SLT KX-HGT100 is supported. 18 Public SIP CO compatibility is increased. *) Compatibility list is informed by different document. TDA600 : N/A TDA30/50-100-200 : MPR V5 TDA600 : N/A TDA30/50-100-200 : MPR V5 TDA : N/A TDA : N/A TDA : N/A

Reference

Roaming to Remote Office by IP CS Main Office Remote Office KX-TDE / NCP IP Network IP-CS DECT DECT IP-CS D-PT CS CS IP-PT - You can use your DECT handset in branch office or home, as well as in main office.

CTI for PS Main Office Remote Office IP Network KX-TDE / NCP IP-CS CS - Wired telephone is removed from some advanced office. All of extension users have PS instead of D-PT. - When user is working with PC on desk, user wants to dial from Phone book in PC and sets Fwd using PC. (Same as D-PT user) => Target : Business application such as Communication Assistant

Cellular Phone as Extension Busy Display by DSS key when Cellular Phone as Extension is on the phone Telephone Network (Yokohama : 045) Telephone Network (Fukuoka : 092) Cellular Network (080) Main : 092-477-1100 DDI : 092-477-11xx KX-TDE / NCP Customer (045-123-4567) Screened Transfer Extn102 Extn103 Extn 202 Virtual PS (092-477-1122) Extn101 PT (092-477-1111) Extn102 PT (092-477-1122) Extn 202 Cell Phone (080-1111-9922) ICD Group DSS key for 102 becomes red, even when ICD group call is received by the paired cellular phone, or even when call is made by the paired cellular phone through PBX using DISA. 092-477-1122 can be informed to network as CLIP when call from cellular phone.

End of Document