802.11a/n Wireless LAN Outdoor AP WNAP-7300 Icon1 Icon2 Icon3 Icon4 Icon5

Presentation Outline Product Position Product Overview Product Features Applications Web UI Comparison – Internal Comparison – External Appendix

Product Position 802.11a/n 802.11b/g/n 802.11a/b/g 802.11a 802.11b/g 2T2R 300Mbps PLANET Outdoor Wireless LAN Product Classification WNAP-7300 802.11a/n 802.11a/b/g 802.11a 802.11b/g 802.11b/g/n WNAP-7200 (1T1R/ 150Mbps) WNAP-6300 (1T1R/ 150Mbps) MAP-3020 WAP-8000 WAP-7000 WAP-6000 WAP-6100 WAP-6200

Quick Product Review – 5GHz Outdoor AP WAP-7000 WNAP-7200 WNAP-7300 Frequency 5GHz 5GHZ Standard 802.11a 802.11a/n MIMO System 1 1T1R 2T2R Max. Data Rate 54Mbps 150Mbps 300Mbps Built-in Antenna - 18dBi 16dBi Detachable Antenna N-Type RP-SMA x 2 Max. TX Power 18dbm 23dbm 24dbm LAN 1 x RJ-45 2 x RJ-45 Wireless Mode AP WDS AP Client AP+WDS Client Bridge (4) WISP

Product Overview Housing Design IP-55 case for water-proof and dedicated outdoor usage Built-in dual polarity 5GHz 16dBi patch antenna, characteristic as table below Reserve SMA Connector x 2, switchable by Web UI, i.e either manual antennas or 16db antenna Vertical Horizontal (YZ Plane /H-Plane)：36º (YZ Plane /H-Plane)：38º (XZ Plane /E-Plane)：15º (XZ Plane /E-Plane)：17º

PoE out pass-through (power enabled by Web UI) Product Overview Internal Construction Power On/Off Button Reset Button RJ-45 Port x 2 (LAN1 & LAN2) RP-SMA Connector x 2 Mounting Kit WNAP-7300 fixing to the pole LAN2 - Secondary PoE out pass-through (power enabled by Web UI) LAN1 - Main Passive PoE 15V~18V RP-SMA Connector RP-SMA Connector Reset Button Power On/Off Button Mounting Kit

Product Overview Proprietary PoE interface Offer Power Supply (DC) with PoE (Power over Ethernet) injector Up to 100 meters UTP wiring 15V 0.8A Passive PoE Up to 100m UTP wiring

Product Overview Installation STEP 1：Loosen the screw with a Phillips screwdriver. Grab the cover and pull it out as the figure shown below. The screw

Product Overview Installation STEP 2：Plug a standard Ethernet cable into the RJ45 port labeled “LAN 1”, and press the black PWR button beside the LAN 1 Ethernet port. STEP 3：Attach and fasten the removable cover to the bottom of the WNAP-7300.

Product Overview Installation Diagram Complete Set Strongly suggest using STP cable (part no. CB-STP-25) Consider to install ELA-100 avoiding thunder strike Avoiding RJ45 connector from water Fix WNAP-7300 in optimum location

Product Features Wireless bridge Max connection distance up to 10Km in the clear Line of Sight

Product Features Multiple-Operation Mode Router Mode / WISP Mode Bridge Mode Router and AP Application IGMP Snooping and 802.1D （Spanning Tree）support Firewall, DHCP Server, WMM support Power over Ethernet design (with proprietary injector) IP-55 Enclosure Wide range of temperature tolerance (-20~70 degree C) for low or high temperature environment

Product Features RF interface IEEE 802.11a/n standards compliant High output power up to 400mW with multiple adjustable transmit power control Data rate up to 300Mbps with 802.11n mode Built-in 16dBi directional antenna (dual-polarity) Reserve SMA Connector allows for stronger antenna upgrades

Product Features Wireless Operation Mode AP, Client, Client CPE (WISP), WDS, AP+WDS WDS up to 4 remote APs SSID Broadcast & Hide Wireless Security 64/128/152-bit WEP, 802.1X, WPA, WPA2, WPA- PSK(TKIP), WPA2-PSK(AES) Authentication Access Control up to 32 STAs Output Power Control (Full, 50%, 25%, 12.5%, Min)

Product Features Router/Firewall/Management Firewall supports IP/Port Filtering Support DMZ Up to 2048 NAT Sessions Remote Management Web, SNMPv2/ v3, Telnet, FTP Firmware Upgrade Web, FTP Backup/Restore Configuration Reset to Factory Default System Logs & Ping Watchdog

Applications – PtMP Bridge Typical Application –Point to Multiple Point Bridge Mode

Wireless connection for Internet access Applications - WISP WISP Application WNAP-7300 WISP mode System: Router mode Wireless RF: AP-client mode Up to 10km No cable implement Wireless connection for Internet access WISP Provider

Data communication between A and B Data communication between A and B Applications - WDS WDS Bridge Application WNAP-7300 WNAP-7300 Site A Site B Up to 10 Km Data communication between A and B Data communication between A and B

Application – Wireless Extension

Applications – Wireless Extension 5GHZ 10km

Web UI Clear & Concise System Status Web Login

Network Flow Information Associated Client List Web UI - Status Network Flow Information Associated Client List Bridged AP List ARP Table DHCP Client List

Web UI - Setup Multiple Network Mode Support STP Support Multiple-WAN type support Gateway Support in Bridge mode RADIUS server’s Settings Firewall Supports: Source Destination IP/Port Filtering DMZ Support Time & NTP settings

Backup/Restore configuration Reset to Factory Default Web UI - Management SNMP v2, v3 Local / Remote mgt. Firmware Upgrade: Web, FTP(Command line) Backup/Restore configuration Reset to Factory Default S/W Reboot Password Settings

Comparison - Internal PLANET/WNAP-7300 PLANET/WNAP-7200 Model Features PLANET/WNAP-7300 PLANET/WNAP-7200 PLANET/WAP-7000 Flash/RAM 8MB/32MB 2MB/32MB 8MB/8MB Ethernet Port 2*10/100Mbps(LAN1, LAN2) 1*10/100Mbps Wireless Interface 802.11a/n 802.11a Frequency Band 5GHz Wireless Antenna Internal(default): 16dBi dual-pol External: RP-SMA Connector x 2 *Antenna switchable by Web UI Built-in 18dBi patch antenna N-Type Connector Operating Temp. -20~70°C 0~55°C Wireless Speed 300Mbps 150Mbps 54Mbps 108Mbps in turbo mode Output Power 26dBm(400mW) 25dBm(300mW) 18dBm(100mW) Wireless Encryption 64/128/152-bit WEP, WPA1/2, WPA-PSK1/2, 802.1X 64/128-bit WEP, WPA1/2, WPA-PSK1/2, 802.1X 64/128/152-bit WEP WMM Yes No Operating Mode AP, Client, WDS, AP+WDS, WISP AP, Client, WDS, AP+WDS, Repeater, WISP AP, WDS SNMP System Log Yes, cannot save

Comparison - External PLANET/WNAP-7300 Cisco/AIR-BR1410A-A-K9-N Model Features PLANET/WNAP-7300 Cisco/AIR-BR1410A-A-K9-N D-Link/DWL-7700AP Ethernet Port 2*10/100Mbps(LAN1, LAN2) 1*10/100Mbps H/W Button Power On/Off, Reset No Reset Wireless Interface 802.11a/n 802.11a 802.11a/b/g Frequency Band 5GHz 2.4G/5GHz Wireless Antenna Internal (default): 16dBi dual-pol External: RP-SMA Connector x 2 *Antenna switchable by Web UI N-Type Connector Dual 5dBi Gain Reverse-N Type antennas Output Power 26dBm(400mW) 24dBm(250mW) 23dBm(200mW) PoE Passive 802.3af Wireless Encryption 64/128/152-bit WEP, WPA1/2, WPA-PSK1/2,802.1X 40/128-bit WEP, WPA1/2, WPA-PSK1/2,802.1X Wireless Speed 300Mbps 54Mbps Operating Mode AP, Client, WDS, AP+WDS, WISP AP, WDS AP, Client, WDS Access Control Yes Firewall DMZ Port Forwarding System log Management Telnet, HTTP, FTP, TFTP, SNMP Telnet, HTTP, SNMP, Utility

Appendix Related Products Accessories CB-STP-25 (25M STP Cat5 Cable) ELA-100 (Ethernet Lightning Arrest Box) Accessories ANT-FP18A ANT-OM10A ANT-SE17A WL-LTN (Lightning Arrester) ELA-100 5GHz Antenna WL-LTN

Appendix Target Market Benefit Target Customer Telecom to Business Telecom to Residential Building to Building Public Area Access Hotel/Resort/Campus Small Wireless ISP Benefit Flexible in installation Flexible in wireless coverage Saving wiring cost Wireless Mobility Target Customer Who buy the products WAP-6000 WAP-6100 WAP-6200 WAP-7000 WAP-8000 WNAP-7200 WNAP-6300 MAP-2000/3000 Series Who ever ask about WISP Outdoor Access Point Low cost Access Point