EGR 334 Thermodynamics Chapter 4: Section 10-12

Slides:



Advertisements
Similar presentations
Chapter 11 Refrigeration Cycles Study Guide in PowerPoint to accompany Thermodynamics: An Engineering Approach, 5th edition by Yunus A. Çengel.
Advertisements

Refrigeration Cycles د/ محمود عبدالوهاب.
Second Law Analysis of Open Systems Isentropic Device Efficiency
Thermodynamics Lecture Series
Assumptions: Incompressible substance, B. Negligible heat transfer
EGR 334 Thermodynamics Chapter 4: Section 4-5
EGR 334 Thermodynamics Chapter 6: Sections 9-10
ME 200 L19: ME 200 L19:Conservation Laws: Cycles HW 7 Due Wednesday before 4 pm HW 8 Posted Start early Kim See’s Office ME Gatewood Wing Room
Lecture 05: Chapter 2 Review
EGR 334 Thermodynamics Chapter 4: Section 6-8
ME 210 Advanced Thermodynamics
Entropy balance for Open Systems
Advanced Thermodynamics Note 6 Applications of Thermodynamics to Flow Processes Lecturer: 郭修伯.
Refrigeration Cycles Chapter 11.
EGR 334 Thermodynamics Chapter 5: Sections 10-11
EGR 334 Thermodynamics Chapter 6: Sections 1-5
Reading: Cengel & Boles, Chapter 9
Vapor and Combined Power Cycles
Thermodynamics Lecture Series Applied Sciences Education.
EGR 334 Thermodynamics Chapter 6: Sections 6-8
Quiz Twelve Solutions and Review for Final Examination
ES 202 Fluid and Thermal Systems Lecture 23: Power Cycles (2/4/2003)
Second Law Thermodynamics Professor Lee Carkner Lecture 11.
Lec 23: Brayton cycle regeneration, Rankine cycle
EGR 334 Thermodynamics Chapter 6: Sections 11-13
EGR 334 Thermodynamics Chapter 4: Section 9-10
EGR 334 Thermodynamics Chapter 12: Sections 1-4
EGR 334 Thermodynamics Chapter 5: Sections 1-9
Power Generation Cycles Vapor Power Generation The Rankine Cycle
EGR 334 Thermodynamics Chapter 10:
EGR 334 Thermodynamics Chapter 9: Sections 5-6
EGR 334 Thermodynamics Chapter 8: Sections 1-2
Thermodynamics I Chapter 6 Entropy Mohsin Mohd Sies Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia.
Chap. 3 (Sec. 3-5 to End of Chapter) Mass Flow Rate =  A V (kg/s) Volume Flow Rate = A V (m 3 /s) V = velocity.
Engineering Applications of Control Volume-2 P M V Subbarao Professor Mechanical Engineering Department More Innovations for Extrasomatism…..
EGR 334 Thermodynamics Chapter 4: Review Lecture 19: Integrated Systems and System Analysis Quiz Today?
Calculating Entropy Change
The First Law of Thermodynamics
Control Volume Analysis Using Energy
Chapter 6 Using Entropy.
ME 200 L31: Review for Examination 3 ME 200 L31: Review for Examination 3 Thu 4/10/14 Examination 3 (L22 – L30) 6:30 – 7:30 PM WTHR 200, CL50 224, PHY.
Lesson 8 SECOND LAW OF THERMODYNAMICS
Review for Exam 2.
STEAM TURBINE POWER CYCLES. The vast majority of electrical generating plants are variations of vapour power plants in which water is the working fluid.
Entropy Rate Balance for Closed Systems
Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Distinguish between steady-state and transient analysis, ►Distinguishing between mass.
Chapter 4 Control Volume Analysis Using Energy (continued)
ME 200 L23: Clausius Inequality and Control Volume Example Problems Kim See’s Office ME Gatewood Wing Room 2172 Please check your HW Grades on Blackboard.
Chapter 11 Refrigeration Cycles Study Guide in PowerPoint to accompany Thermodynamics: An Engineering Approach, 8th edition by Yunus A. Çengel.
Second Law of Thermodynamics Alternative Statements
Control Volume Analysis Using Energy
Example Steam enters a turbine at 1200 kPa and 350°C and it exits at 100 kPa, 150°C. The water mass flow rate through the turbine is 2 kg/s. Determine.
Dr. Owen Clarkin School of Mechanical & Manufacturing Engineering Summary of Energy Topics Chapter 1: Thermodynamics / Energy Introduction Chapter 2: Systems.
Dr. Owen Clarkin School of Mechanical & Manufacturing Engineering Summary of Energy Topics Chapter 1: Thermodynamics / Energy Introduction Chapter 2: Systems.
Chapter 5 Part 2 Mass and Energy Analysis of Control Volumes Study Guide in PowerPoint to accompany Thermodynamics: An Engineering Approach, 8th edition.
1 Chapter 5 Mass and Energy Analysis of Control Volumes.
Chapter 11 Refrigeration Cycles Study Guide in PowerPoint to accompany Thermodynamics: An Engineering Approach, 7th edition by Yunus A. Çengel.
First and Second Law of Thermodynamics
First Law of Thermodynamics applied to Flow processes
SNS COLLEGE OF ENGINEERING Coimbatore-107 Subject: Thermal Engineering
Power and Refrigeration Systems
Chapter 11 Refrigeration Cycles Study Guide in PowerPoint to accompany Thermodynamics: An Engineering Approach, 5th edition by Yunus A. Çengel.
Chapter 5 The First Law of Thermodynamics for Opened Systems
Chapter 6 THE MECHANICAL ENERGY BALANCE.
Mass and Energy Analysis of Control Volumes (Open Systems)
Z.E. Z.E. Z.E. IE 211 INTRODUCTION TO ENGINEERING THERMODYNAMICS
Chapter 11 Refrigeration Cycles Study Guide in PowerPoint to accompany Thermodynamics: An Engineering Approach, 5th edition by Yunus A. Çengel.
Review for Exam 2.
Presentation transcript:

EGR 334 Thermodynamics Chapter 4: Section 10-12 Lecture 18: Integrated Systems and System Analysis Quiz Today?

Today’s main concepts: Be able to explain what an integrated system is Be able to describe the components of some common integrated systems Apply mass balance, energy balance, and continuity to streams of flow through integrated systems. Reading Assignment: No New Reading Assignment for Wed. Read Chap 5 for Friday. Homework Assignment: Problems from Chap 4: 95, 98, 102

Terms for Chap 5 Class Discussion : Spontaneous Heat Transfer Clausius Statement Kelvin-Planck Statement Entropy Statement Irreversible vs. Reversible Internally Reversible Process Carnot Corollaries Carnot Efficiency Max. heat pump efficiency Max. refrigeration cycle COP Carnot Cycle Clausius Inequality You may want to create a summary sheet to help you discuss each of the concepts.

System Integration Engineers creatively combine components to achieve some overall objective, subject to constraints such as minimum total cost. This engineering activity is called system integration. The simple vapor power plant of Fig 4.16 provides an illustration.

Integrated Thermodynamics Systems: Sec 4.11: System Integration Integrated Thermodynamics Systems: System Integration : Combine components to make a useful cycle Some common systems: - Power Plant - Refrigerator - Heat Pump Components: Pipes Nozzles/Diffusers Turbines Compressors/Pumps Heat Exchanger Throttling

Power Plant Cycle 1. Boil Water Burn something Nuclear Reaction Sec 4.11: System Integration Power Plant Cycle 1. Boil Water Burn something Nuclear Reaction Geothermal http://www.lenntech.com/applications/process/boiler/boiler-feed-water.htm http://geothermal.marin.org/Geopresentation/sld038.htm 2. Use the steam as it rises to turn a turbine.

Power Plant Cycle 3.Condense Steam (to recycle water) Sec 4.11: System Integration Power Plant Cycle 3.Condense Steam (to recycle water) using a heat exchanger http://www.stf.it/products/rosso/steam_surface_condenser/source/6.html 4. Pump water back to boiler.

Power Plant Cycle 2. Turbine 3. Condenser 4. Pump 1. Boiler Sec 4.11: System Integration Power Plant Cycle 2. Turbine 3. Condenser 4. Pump http://www.khc.cz/english/condenser_tubes.html 1. Boiler

Power Plant Cycle QCV WCV 1. Boiler 2. Turbine WCV 4. Pump QCV Sec 4.11: System Integration Power Plant Cycle QCV WCV 1. Boiler 2. Turbine WCV . 4. Pump QCV 3. Condenser

Refrigeration cycle 1.Condenser Sec 4.11: System Integration Refrigeration cycle 1.Condenser We know that condensing something will remove heat from the fluid. http://www.allproducts.com/manufacture100/kanpus/product2.html http://www.diytrade.com/china/4/products/1908837/PLATE_TUBE_TYPE_CONDENSER.html http://www.diytrade.com/china/4/products/2715158/A_C_Evaporator.html 3. Evaporator To have something to condense, we must have evaporated something. (Both are heat exchangers)

Refrigeration cycle 1. Condenser 4. Compressor 3. Evaporator Sec 4.11: System Integration Refrigeration cycle 1. Condenser 4. Compressor 3. Evaporator 2. Throttling valve/ Expander

Refrigeration Cycle 1. Condenser QCV WCV 4. Compressor 3. Evaporator Sec 4.11: System Integration Refrigeration Cycle 1. Condenser WCV QCV 2. Throttling valve/ Expander 4. Compressor 3. Evaporator QCV

Power required for the compressor, in hp, Sec 4.11: System Integration Example: (4.103) A simple gas turbine power cycle operating at steady state with air as the working substance is shown in the figure. The cycle components include an air compressor mounted on the same shaft as the turbine. The air is heated in the high-pressure heat exchanger before entering the turbine. The air exiting the turbine is cooled in the low- pressure heat exchanger before returning to the compressor. KE and PE effects are negligible. The compressor and turbine are adiabatic. Using the ideal gas model for air, determine the Power required for the compressor, in hp, Power output of the turbine, in hp, Thermal efficiency of the cycle

Power required for the compressor, in hp, Sec 4.11: System Integration Example: (4.103) Power required for the compressor, in hp, Power output of the turbine, in hp, Thermal efficiency of the cycle state 1 2 3 4 AV (ft3/min) 30,000 p (atm) p2>p1 p3=p2 p4=p1 T (°R) 520 650 2000 980 h (BTU/lb) state 1 2 3 4 AV (ft3/min) 30,000 p (atm) p2>p1 p3=p2 T (°R) 520 650 2000 980 h (BTU/lb) 124.27 155.51 504.71 236.02 From Table A-22E : Ideal Gas Properties of Air Assumptions Steady State KE=  PE = 0 Turbine and compressor are Adiabatic (QCV= 0) No work in Heat Ex. (WCV = 0) Air is modeled as an ideal gas state Q W Compressor ? Heat Ex 1 Turbine Heat Ex 2

Power required for the compressor, in hp, Sec 4.11: System Integration Example: (4.103) Power required for the compressor, in hp, Power output of the turbine, in hp, Thermal efficiency of the cycle state 1 2 3 4 AV (ft3/min) 30,000 p (atm) p2>p1 p3=p2 T (°R) 520 650 2000 980 h (BTU/lb) 124.27 155.51 504.71 236.02 state Q W Compressor ? Heat Ex 1 Turbine Heat Ex 2 Using Continuity Eq. Ideal Gas Eq. so and

Power required for the compressor, in hp, Sec 4.11: System Integration Example: (4.103) Power required for the compressor, in hp, Power output of the turbine, in hp, Thermal efficiency of the cycle state 1 2 3 4 AV (ft3/min) 30,000 p (atm) p2>p1 p3=p2 T (°R) 520 650 2000 980 h (BTU/lb) 124.27 155.51 504.71 236.02 state Q W Compressor -1687 Heat Ex 1 Turbine ? Heat Ex 2 state Q W Compressor ? Heat Ex 1 Turbine Heat Ex 2 Energy Balance (Compressor):

Power required for the compressor, in hp, Sec 4.11: System Integration Example: (4.103) Power required for the compressor, in hp, Power output of the turbine, in hp, Thermal efficiency of the cycle state 1 2 3 4 AV (ft3/min) 30,000 p (atm) p2>p1 p3=p2 T (°R) 520 650 2000 980 h (BTU/lb) 124.27 155.51 504.71 236.02 state Q W Compressor -1687 Heat Ex 1 Turbine 14,505 Heat Ex 2 Energy Balance (Same as Compressor):

Power required for the compressor, in hp, Sec 4.11: System Integration Example: (4.103) Power required for the compressor, in hp, Power output of the turbine, in hp, Thermal efficiency of the cycle state 1 2 3 4 AV (ft3/min) 30,000 p (atm) p2>p1 p3=p2 T (°R) 520 650 2000 980 h (BTU/lb) 124.27 155.51 504.71 236.02 state Q W Compressor -1687 Heat Ex 1 18,851 Turbine 14,505 Heat Ex 2 state Q W Compressor -1687 Heat Ex 1 Turbine 14,505 Heat Ex 2 Find Q23 Energy Balance around heat exchanger:

Sec 4.9: Heat Exchangers (Revisited) Example: (4.78) As sketched in the figure, a condenser using river water to condense steam with a mass flow rate of 2x105 kg/h from saturated vapor to saturated liquid at a pressure of 0.1 bar is proposed for an industrial plant. Measurements indicate that several hundred meters upstream of the plant, the river has a volumetric flow rate of 2x105 m3/h and a temperature of 15°C. For operation at steady state and ignoring changes in KE and PE, determine the river-water temperature rise, in °C, downstream of the plant traceable to use of such a condenser, and comment.

Example: (4.78) Sec 4.9: Heat Exchangers (Revisited) state Pl,i Pl,e R,i R,e AV (m3/h) 2x105 m (kg/h) x 1 p (bar) 0.1 T (°C) 45.81 15 ? h (kJ/kg) 2584.7 191.83 62.99 state Pl,i Pl,e R,i R,e Av (m3/h) 2x105 m (kg/h) x 1 P (bar) 0.1 T (°C) 45.81 15 ? h (kJ/kg) state Pl,i Pl,e R,i R,e Av (m3/h) 2x105 m (kg/h) x 1 P (bar) 0.1 T (°C) 15 ? h (kJ/kg) Look up intensive properties for water from Tables based on known property values From Table A-2 : Properties of Saturated Water

Example: (4.78) Sec 4.9: Heat Exchangers (Revisited) state Pl,i Pl,e R,i R,e Av (m3/h) 2x105 m (kg/h) 2x108 x 1 P (bar) 0.1 T (°C) 45.81 15 ? h (kJ/kg) 2584.7 191.83 62.99 Using the energy balance simplified for a heat exchanger From Table A-2 : Properties of Saturated Water (p817 & 819)

Using this value, the exit temperature may be found from Table A-2. Sec 4.9: Heat Exchangers (Revisited) Example: (4.78) state Pl,i Pl,e R,i R,e Av (m3/h) 2x105 m (kg/h) x 1 P (bar) 0.1 T (°C) 45.81 15 ? h (kJ/kg) 2584.7 191.83 62.99 Plugging known values: From Table A-2 : Properties of Saturated Water (p817 & 819) Using this value, the exit temperature may be found from Table A-2. TR,e = 15.6°C  giving a temperature rise of 0.6 °C

end of Lecture 18 Slides