Power² & Light² Version

A complete unit with maximum power

Piezotome 2 LED handpiece Newtron LED handpiece Ultrasonic connector: Objectives: Pre-implant surgery, implantology, maxillofacial surgeries and conventional treatments I-Surge micro-motor Piezotome 2 LED handpiece Newtron LED handpiece Ultrasonic connector: The Piezotome or Newtron handpieces are automatically recognized by the unit

The Implant Center 2 combines the best of ultrasonic and motor technologies for: - Pre-implant surgery, - Implant surgery, - Implant maintenance, - Oral maxillofacial surgeries

Technology Motor technology: Ultrasonic technology: Brushless Rotation speed: 100 – 40 000 rpm 6 N.cm up to 24 000 rpm Contra-angle ratio: 20:1 Rotation speed at instrument end: [5 – 2 000 rpm] Automatic frequency : 28-36 kHz Controlled amplitude Real-time power adjustment

Ultrasonics Newtron mode: piezo sinusoïdal signal Piezotome mode: modulated piezo signal (modulation)

Ultrasonic high power generator Safety: preservation of soft tissue (nerves, membranes, arteries). Rapidity: fine, fast, precise and effortless selective cut thanks to ultra-sharp, robust and resistant Piezotome tips. Comfort: Atraumatic treatments (no bone loss, no bleeding), fast healing, and greatly reduced post-operative pain.

New touch-sensitive screen

Giant 5.7’’ screen, Touch-sensitive screen (even with gloves), Highlighting of the activated function for improved visibility.

Screen zones Technology zone Piezotome mode activated Irrigation zone Power value zone Mode zone Options zone

Piezotome mode

Handpiece Respect of soft tissue, fast healing and greatly reduced post-operative pain Piloted by

Boosted (up to 60 W output power) for a much quicker procedure, It is up to three times more powerful than Piezotome/Implant Center 1 Equipped with the latest high luminosity generation LEDs, Highly resistant, Does not induce overheating or extraneous vibration, Can be sterilized, Easy to clean (the nozzle can be detached).

Piezotome mode: Clinical aspects To perform successful, fast and worry-free delicate pre-implant surgical procedures: - fine osteotomy, - osteoplasty, - bone grafting, - sinus lift, - extraction, - crown lengthening - …

Piezotome mode LED Purge Irrigation flow rate Progressive footswitch Irrigation activation/ deactivation Save Mode Fine power adjustment Power settings referring to bone density classification

Bone density D1: Very high-density bone and very thick cortical. D2: High-density bone and thick cortical. D3: Medium-density bone, thin cortical and dense spongy bone. D4: Low density bone, thin (or non-existent) cortical and spongy bone.

Piezotome mode Purge Irrigation flow rate Irrigation activation/ deactivation Fine power adjustment

Piezotome 2 Tips Piezotome tips version 2 Piezotome tips version 1 The tips dedicated to Piezotome 2 and Implant Center 2 are easily recognizable by: their large base, their “II” laser mark. Piezotome tips version 1 Piezotome tips version 2

Piezotome 2 Tips Stainless-steel medical grade alloy with specific thermic and surface treatments, polishing, etc. Synthetic diamond coating with special processing. Clean, fast and effortless cut. Ultra-sharp, robust and resistant tips. NEW PACK design!

I-SURGE mode

I-SURGE mode Handpiece motor (contra-angle, straight, multiplier) Progressive or ON/OFF footswitch Rotation speed Torque Save mode Rotation direction  Audible signal Forward/reverse drive selected through the footswitch 4 modes with complete customization possible

settings adjustments: Modes Fast and simple settings adjustments: Modes 1. Select your program.

I-SURGE: four pre-set modes Marking implant site 1200 Rpm 80 N.Cm 80 ml/min Pilot drill 800 Rpm 80 N.cm 100 ml/min Site preparation Tapping 15 Rpm 40 N.cm 100 ml/min Screwing 30 Rpm 40 N.cm 0 ml/min P1, P2, P3: Direct access to Rpm P4: Direct access to Ncm

settings adjustments: CA Fast and simple settings adjustments: CA 1. Select your program. 2. Select/change your contra-angle ratio.

CA ratio selection Standard Multiplier Handpiece/ contra-angle Presentation of the most common contra-angle ratios (multiplier, direct, divider). 20:1 Direct Handpiece/ contra-angle If the ratio is not pre-defined, insert your own ratio by pressing this button. Standard Divider Handpiece/ contra-angle

CA ratio selection 20:1 Set your own contra-angle ratio, whether it is multiplier, direct, or divider. Handpiece Setting

settings adjustments: Rpm Fast and simple settings adjustments: Rpm 1. Select your program. 2. Select/change your contra-angle ratio. 3. Select the speed rotation needed by: Pressing the + and – buttons on P1, P2 and P3 only, Pressing the Rpm button.

settings adjustments: Rpm Fast and simple settings adjustments: Rpm 20:1 1235 Rpm setting

settings adjustments: Ncm Fast and simple settings adjustments: Ncm 1. Select your program. 2. Select/change your contra-angle ratio. 3. Select the speed rotation needed by: Pressing the + and – buttons on P1, P2 and P3 only, Pressing the Rpm button. 4. Select the torque needed by: Pressing the + and – buttons on P4 mode only, Pressing the Ncm button.

I-SURGE mode 20:1 1235 Torque Setting 85

I-SURGE mode 1. Select your program. 2. Select/change your contra-angle ratio. 3. Select the speed rotation needed by: Pressing the + and – buttons on P1, P2 and P3 only, Pressing the Rpm button. 4. Select the torque needed by: Pressing the + and – buttons on P4 mode only, Pressing the Ncm button. 5. Increase/decrease/delete irrigation flow rate. 6. Select the progressive or ON/OFF footswitch 7. Save

NEWTRON mode

LED NEWTRON handpiece • Excellent visibility even in posterior areas, • Cold light (6 000 – 7 000°K) for better tissue recognition, • Ideal for working with loupes, • Powerful (100 000 Lux), very long-lasting LEDs, • Handpiece can be autoclaved at 134°C.

NEWTRON mode: Clinical aspects Periodontal procedures (surgical, non-surgical) Endodontics Microsurgery (apicoectomies) Implant maintenance etc,…

NEWTRON MODE Delicate precision treatments Periodontics Prophylaxis - Scaling Maintenance Endodontics PH2R tip ET25 tip N°1S tip H3 tip Surgical endodontics Conservative and restorative dentistry Excavation Prosthetic finishing S12-90ND tip EX1 tip PM1 tip

NEWTRON mode: Four power settings Low power; low amplitude. Delicate treatments: Periodontics. Medium power; medium amplitude. Precision treatments: Endodontics. High power; high amplitude. Routine prophylaxis: Scaling. Very high power; maximum amplitude. Special treatments: Crown loosening.

NEWTRON mode: Fine adjustment Each mode (Soft – Medium - High – Boost) enables fine power adjustment from 1 to 10.

Ergonomics

Peristaltic pumps Silent-running pumps. Extremely precise irrigation flow. No bone necrosis. Easy to install irrigation line.

PiezoTouch™ footswitch Removable arch Irrigation Choice of instrument Programs Purge, Rotation direction PiezoTouch™ Progressive power regulation: Ultrasonics and motor

PiezoTouch™ D1 to D3, the ultrasonic power delivered will vary between D3 – (01) and the power selected by the user (mode and fine adjustment). In D4 the ultrasonic power will only vary from 1 to 5 depending on the fine adjustment selected by the user. In Newtron function, the ultrasonic power in progressive varies between 1 and 10 in each mode.

Optimal disinfection and asepsis Designed for use under the most demanding clinical conditions. All accessories (cords, handpieces, motor, tips…) can be autoclaved at 134°C for 18 minutes.

Clinical cases

Clinical cases

Clinical cases

Clinical cases

Clinical cases Coming soon!

Competition

Piloted by Piloted by Technology Ergonomics FEATURES Implant Center 2 Surgisonic Moto INTRAsurg 1000 Air Company SATELEC ESACROM KAVO Technology Handpieces Piezotome = Pre-implant surgery I-SURGE = Implant surgery Newtron = All conventional treatments Surgysonic2 = Pre-implant surgery Moto = Implant surgery Soniclex Bone --> Pre-implant surgery SONICflex --> Scaling Air-driven Maximum Output Power (measured) 60 Watts - Yield of Power 90% 20 Watts - Yield of Power 90% Not measured, average Weak Autoclavable LED handpiece YES (100 000 Lux) NO PiezoTouch - progressivity in ultrasonics YES Frequency High: 28 000 - 36 000 Hz High: 24 000 - 32 000 Hz Low: 6 000 Hz Linear tip movement YES Controlled and linear Very precise and easy to control AVERAGE NO Variability - Elliptical movement Very hard to control Very high precision Cruise Control Motor I-SURGE MOTO INTRAsurg 300 plus Brushless motor Ultrasonics YES YES (Piezo) YES (they claim) YES (Piezo) YES NO (Sonic) The widest speed rotation range on the market YES 100 - 40 000 rpm NO 200 - 40 000 rpm NO 300 - 40 000 rpm Torque 6 N.cm 3 N.cm (very low) 5.5 N.cm Ergonomics Pumps 2 peristaltic pumps 1 peristaltic pump Touch screen YES (very fine and easy settings) Multi-function footswitch YES (new weighted footswitch) Handpiece cord length 2m or 2.9m on option 2m Piloted by Piloted by

Power ultrasonics in version: One device for a new approach to implantology