MicroSim pspice

Pspice設計流程   畫電路圖. 更改元件值. 加入測試點. 設定分析項目 執行模擬SIMULATION. 在示波器視窗中加入軌跡.

Step 1.畫電路圖 A part is a basic circuit element, such as a resistor or power source. Each part is associated with a part name and is stored in a library. Part Connection Reference Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable

Connections are made primarily by wire segments and bus strips. Step 2:接線 Connections Connections are made primarily by wire segments and bus strips. Part Connection Reference Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable

references are different for each instance of the same part. Step 3:參考名稱References References are unique names for parts. Unlike the generic part names (such as VDC and R) references are different for each instance of the same part. Part Connection 參考名稱References Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable

Values give the magnitude of each part instance. Step 4: 元件數值Values Values give the magnitude of each part instance. A name can be associated with each value. Part Connection Reference Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable

Step 5:模擬(Run simulation) Part Connection Reference Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable

模擬結果輸出檔案Output file Netlist field. Alias Field. Each time Pspice performs an analysis it automatically generates an output file. Netlist field. * Schematics Netlist * V_V1 $N_0001 0 10V R_R1 0 $N_0001 1K Alias Field. * Schematics Aliases * .ALIASES V_V1 V1(+=$N_0001 -=0 ) R_R1 R1(1=0 2=$N_0001 ) .ENDALIASES Small signal bias solution. **** SMALL SIGNAL BIAS SOLUTION TEMPERATURE = 27.000 DEG C NODE VOLTAGE NODE VOLTAGE NODE VOLTAGE NODE VOLTAGE ($N_0001) 10.0000 VOLTAGE SOURCE CURRENTS NAME CURRENT V_V1 -1.000E-02 TOTAL POWER DISSIPATION 1.00E-01 WATTS