Echelon Method Problem 2.1 # 23 Prepared by E. Gretchen Gascon

Step 1: The problem

Step 2: Eliminate the x term Use equation 1 and 2 Use the multiplication rule to get the coefficients of the x term opposites Next Add the two equations to get a new equation. Remember this equation it will be used later

Step 2: Eliminate the x term (cont.) Use equation 2 and 3 Use the multiplication rule to get the coefficients of the x term opposites Next Add the two equations to get a new equation. Remember this equation it will be used later

Step 3: Use the two equations to eliminate the y term Use the multiplication rule to get the coefficients of the y term opposites Next Add the two equations to get a new equation. You are now ready to create this new set of equations

The new system of equations One equations has 3 variables, one has 2 variables, and one equation has only 1 variable.

Step 6 Solve the last equation (the equation with only one variable)

Step 7: Back Substitution Start with the last equation (the simplest one)

There is more than one way to solve this problem The next slides will assume that you worked with r1 and r2, then when to use r1 and r3. The work looks a bit different, however the end results are the same.

(alternative solution) Step 2: Eliminate the x term (cont.) Multiply the r3 by -1 to get the coefficients as opposites Next Add the two equations to get a new equation. Notice that this equation can be solved for y already without further adding of equations. This example uses 1 and 3 As demonstrated previous in step 2(slide #4), you can use equation 2 and 3, however, you could have used equations 1 and 3 as well.

Same Solutions

Comments Was there anything about this PowerPoint presentation that you would like further explained? Post comments or questions to the Main Forum.