Chapter 1. Basic Concepts of Medical Instrumentation Walter H. Olson Medical Instrumentation Application and Design, 4th Edition John G. Webster, Univ. of Wisconsin, Madison ISBN: 978-0-471-67600-3

fig_01_01 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. Figure 1.1 Generalized instrumentation system The sensor converts energy or information from the measurand to another form (usually electric). This signal is then processed and displayed so that humans can perceive the information. Elements and connections shown by dashed lines are optional for some applications.

table_01_01a From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. table_01_01b table_01_01b

fig_01_02 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. Figure 1.2 simplified electrocardiographic recording system Two possible interfering inputs are stray magnetic fields and capacitively coupled noise. Orientation of patient cables and changes in electrode-skin impedance are two possible modifying inputs. Z1 and Z2 represent the electrode-skin interface impedances. fig_01_02

eq_01_01 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

eq_01_04 eq_01_04 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

eq_01_09 eq_01_09 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

fig_01_03 Figure 1.3 (a) Static-sensitivity curve that relates desired input xd to output y. Static sensitivity may be constant for only a limited range of inputs, (b) Static sensitivity: zero drift and sensitivity drift. Dotted lines indicate that zero drift and sensitivity drift can be negative. [Part (b) modified from Measurement Systems: Application and Design, by E. O. Doebelin. Copyright Ó 1990 by McGraw-Hill, Inc. Used with permission of McGraw-Hill Book Co.] From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

Figure 1. 4 (a) Basic definition of linearity for a system or element Figure 1.4 (a) Basic definition of linearity for a system or element. The same linear system or element is shown four times for different inputs, (b) A graphical illustrataion of independent nonlinearity equals ±A% of the reading, or ±B% of full scale, whichever is greater (that is, whichever permits the larger error). [Part (b) modified from Measurement Systems: Application and Design, by E. O. Doebelin. Copyright Ó 1990 by McGraw-Hill, Inc. Used with permission of McGraw-Hill Book Co.] fig_01_04 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

eq_01_12 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. eq_01_12

Figure 1.5 (a) A linear potentiometer, an example of a zero-order system, (b) Linear static characteristic for this system, (c) Step response is proportional to input, (d) Sinusoidal frequency response is constant with zero phase shift. fig_01_05 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

Figure 1.6 (a) A low-pass RC filter, an example of a first-order instrument, (b) Static sensitivity for constant inputs, (c) Step response for large time constants (tL) and small time constants (tS). (d) Sinusoidal frequency response for large and small time constants. fig_01_06 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. fig_01_06

From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. eq_01_18

equn_01_01 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. equn_01_01

equn_01_02 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. Figure 1.7 (a) Force-measuring spring scale, an example of a second-order instrument, (b) Static sensitivity, (c) Step response for overdamped case z = 2, critically damped case z = 1, underdamped case z = 0.5. (d) Sinusoidal steady-state frequency response, z = 2, z = 1, z = 0.5. [Part (a) modified from Measurement Systems: Application and Design, by E. O. Doebelin. Copyright Ó 1990 by McGraw-Hill, Inc. Used with permission of McGraw-Hill Book Co.] fig_01_07 fig_01_07

eq_01_25 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. eq_01_25

eq_01_29 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

eq_01_33 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. eq_01_33

eq_01_36 From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc. eq_01_36

fig_01_08 Figure 1.8 Design process for medical instruments Choice and design of instruments are affected by signal factors, and also by environmental, medical, and economic factors. (Revised from Transducers for Biomedical Measurements: Application and Design, by R. S. C. Cobbold. Copyright Ó 1974, John Wiley and Sons, Inc. Used by permission of John Wiley and Sons, Inc.) From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

table_01_02a From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.

table_01_02b From John G. Webster (ed.), Medical instrumentation application and design, 4th ed., John Wiley & Sons, 2010. This material is reproduced with permission of John Wiley & Sons, Inc.