Threaded Inserts (TH series)

Slides:

Advertisements

Similar presentations

WINSSON GROUP Winsson Enterprises Co., Ltd.

Advertisements

Thule Smart RV™ Pod Kit Installation For Smooth-Sided Fiberglass RVs

J.P. Langston Brake Retrofit

Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.

To introduce the PA wire-to-board connector series.

M.G. Chemicals Solutions for the Electronic Evolution.

ZE Connector To introduce the new ZE wire-to-board, crimp style connector series.

BTEC First Engineering

Motor Propeller wrench Screw Nut (2) Cylinder top Tiny screw IGNORE:

Service Training PV Series 42 PVplus

Motor & Encoder Mounting Guide. Bill of Materials 1. 10:1 Micro Metal Gearmotor HP item # 999 X 2 2. Pololu Micro Metal Gearmotor Bracket Extended Pair.

Lock Replacement. Step 1: Cut insulation behind lock mechanism.

BTEC First Engineering

DR-2000 Customer Benefits Security; Tamper resistant programming protects your customer and you! Low maintenance, long battery life & long squeeze tube.

 Scope 32” AX68( ) chassis models. LCDTVSAL32HMA-FLA(Con-1) LCDTVSFL32HMA-FLA(SH-11) LCDTVVLL32FBA-FLA(S9) LCDVBL32HBA-FLAAN(SH-11) LCDVLL32FBA-FLASL(S9)

New LED connector SMDflat – Presentation SMDflat

External nut type series 43

Working with JST Part Numbers Example: SH Series.

Robot Build IT Girls Allowed 2014 Updated 14 th August.

PCB design and fabrication Lin Zhong ELEC424, Fall 2010.

22/01/2014I° microEO meeting1 MICRO-COOLING CONNECTORS.

Embedded Programming and Robotics Lesson 6 Mechanical Assembly 1.

Design Team 6 Alex Volinski Derek Brower Phil Jaworski Jung-Chung Lu Matt Affeldt.

Giga-snaP Socket & Adaptor High Performance IC Sockets And Adaptors.

Connectors 13/03/2013Collaboration meeting CERN - CSEM1.

BB Electronics DfM – Land Pattern Design: The bad and good ones , CNN – PE/DL.

Home PCB fabrication 1-Tools 2-Procedure 3-Example.

Title: Corvette C5 Column Lock Bypass Originator: John Neese Date: 30 Jan 2005 Revision: Sheet: 1 of 6 Column Lock Bypass.

Procedure of Connecting Coil Unit In series with Capacitor 10 April 14 Product: Fully Automatic Washing Machine.

AR4702 (cover plate replacement) Remove existing cover plate by removing the 2 x screws fixed through the top of the plate into the chassis (Phillips screw.

Robotics – 8. Plates (2-sizes) Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments. Available in two sizes.

Making a PCB Report and ppt – presentation 1.)Structure 1.1)Making the PCB 1.2)Assembling a circuit )The components I choose )They functions.

Assembly Instructions SoCo + 2 glasses.

Helicoil installation on MB GPW L134 block. I had a miss, possible valve sticking, or worse, in my engine. The middle head bolt on the left hand side,

Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling.

1 Jim Thomas - LBL Sector Tools – a conversation with Jon Wirth and Eric Anderssen August 28 th, 2015.

How to make a PCB.

PS2200B/3000B Battery Replacement Procedure. 1.Disconnect the wire connecting the UPS and the battery pack. 2.Pull off the battery pack front panel.

 Scope : 32” AX68( ) chassis models.  Purpose : AX68 is EOL. AX68 W/F to be replace with MTK8222LS W/F ( or )  Advantage.

Conformal Coat Quality issues Update of November 3, 2004.

Tire Rotation Tire rotation extends the life of your tires.extends the life of your tires In most cases tires should be rotated every 6000 miles (10,000.

1 Equilibrium The Balancing Robot By: Kerry Scharfglass Whiz Kid.

Description of Hand Tools Tools help us do work and make things. Tools.

Sentek Training Presentation © 2003 All rights reserved Sentek Pty Ltd Sentek Sensor Technologies Installation of EasyAG 50 and EasyAG 80.

Permanent Joining Nails: come in different shapes and sizes. Nails are much cheaper than screws and quick to put in. You do not need to drill holes in.

STEP 1: ASSEMBLE INSERT PLATES 1.Assemble insert plates by press fitting roller bearing and adapter plate into assembly 1.1 Prep all mating surfaces to.

VIEW SERIES with Sliding Door

STEP 1: ASSEMBLE ANGLE PLATES

RE 4/3 RPC Pre-assembly manual 1. HCP case preparation

GENERAL CAUTION TOOLS REQUIRED ASSEMBLY AND INSTALLATION

Deconstructing a Hubsan and Rebuilding

Rs = Current Sensing Resistor

Update on Pavia MM mechanical prototype

Designing Process Of Printed Circuit Boards

Unit 13 Ag Mechanics Fastening metal.

Methods for Mounting LCD Displays

STEP 1: ASSEMBLE ANGLE PLATES

Electronics Manufacturing Processes

Year 11 Occupational Studies – Carpentry and Joinery

Louisiana Tech University

IT 318: M13 PWB Assembly IT M13.

Drawing of stud.

Learn-to-Solder Exercise: Practice Flasher Circuit

Working with JST Part Numbers

Educational Power Point by D&T Within Schools

Thank You For Purchasing Coeur Designs 11” Shower Extension

After service guide for changing PCB

Discard “Old” Gasket Remove original gasket

Plastic Pipe and Fittings Association

Presentation transcript:

Threaded Inserts (TH series) Can change through hole to threaded hole !! Threaded Inserts (TH series) TH Series Change to through hole TH Series Change to through hole THB Series Change to non threaded inserts THC Series Change to non threaded inserts Structure TH Series Cream Solder PCB Copper Foil TH Series Mounting Process 1.On PCB land, apply Cream solder. By Mounter, put the parts 2.Reflow 3.Remove adsorption caps SHINDENKIZAI sdk@mac8sdk.co.jp

Threaded Inserts TH series Through hole is changed to threaded hole(M1.0,M1.2,M1.4,M1.7,M2, M2.6, M3). Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. ■Material: Brass ■Finish: Sn plating over Ni ■Recommended PCB Thickness:1.6t for TH-1.6 Series, 0.8t for TH-0.8 Series ■Recommended Metal Mask Thickness:150-200μ ■Current Capacity 　　■ Tightening Torque TH-0.8-M1.0 10A TH-0.8-M1.2 12A TH-0.8-M1.4 TH-1.6-M1.6 15A TH-1.6-M1.7 TH-1.6-M2 20A TH-1.6-M2.6 TH-1.6-M3 30A TH-0.8-M1.0 0.3kgf-cm(2.94N-cm)and below TH-0.8-M1.2 0.6kgf-cm(5.88N-cm)and below TH-0.8-M1.4 1.0kgf-cm(9.8N-cm)and below TH-1.6-M1.6 1.5kgf-cm(14.7N-cm)and below TH-1.6-M1.7 TH-1.6-M2 TH-1.6-M2.6 3kgf-cm(29.4N-cm)and below TH-1.6-M3 X-dire 5kgf-cm(49N-cm)and below Y-dire 3kgf-cm(29.4N-cm)and below P/N A B C D M Package TH-0.8-M1.0 2.5 1.6 0.7 0.5 M1.0P=0.25 1000/reel TH-0.8-M1.2 1.8 M1.2P=0.25 TH-0.8-M1.4 2.7 2.0 M1.4P=0.3 TH-1.6-M1.6 3.0 2.2 1.5 0.3 M1.6P=0.35 900/reel TH-1.6-M1.7 2.3 M1.7P=0.35 TH-1.6-M2 4.0 M2P=0.4 TH-1.6-M2.6 4.5 3.1 M2.6P=0.45 TH-1.6-M3 5.0 3.5 M3P=0.5 *we can provide the bulk type *Mounter should have automatic recognition system SHINDENKIZAI sdk@mac8sdk.co.jp

Threaded Inserts TH-0.8 series ■Stand-off type threaded inserts. This is mounted on PCB by inserting into through-hole. ■Screws can be inserted from both component and solder side. ■Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. ■Mounter should have automatic recognition system. ■Bulk type (100pcs/pack) is available. ■Recommended PCB Thickness: 0.8-1.5t ■Current Capacity 　　 ■ Tightening Torque TH-0.8-□-M2 20A TH-0.8-□-M2.6 TH-0.8-□-M3 30A TH-0.8-□-M2 1.5kgf-cm (14.7N-cm) and below TH-0.8-□-M2.6 3kgf-cm (29.4N-cm) and below TH-0.8-□-M3 X dire 5kgf-cm (49N-cm) and below Y dire 3kgf-cm (29.4N-cm) and below P/N A B H M Package TH-0.8-1.0-M2 4.0 2.5 1.0 M2 450/reel TH-0.8-1.5-M2 1.5 TH-0.8-2.0-M2 2.0 TH-0.8-2.5-M2 350/reel TH-0.8-3.0-M2 3.0 TH-0.8-3.5-M2 3.5 TH-0.8-4.0-M2 250/reel TH-0.8-4.5-M2 4.5 TH-0.8-5.0-M2 5.0 TH-0.8-1.0-M2.6 3.1 M2.6 TH-0.8-1.5-M2.6 TH-0.8-2.0-M2.6 TH-0.8-2.5-M2.6 TH-0.8-3.0-M2.6 TH-0.8-3.5-M2.6 TH-0.8-4.0-M2.6 TH-0.8-4.5-M2.6 TH-0.8-5.0-M2.6 TH-0.8-5.5-M2.6 5.5 TH-0.8-6.0-M2.6 6.0 TH-0.8-6.5-M2.6 6.5 300/reel TH-0.8-7.0-M2.6 7.0 TH-0.8-7.5-M2.6 7.5 TH-0.8-8.0-M2.6 8.0 P/N A B H M Package TH-0.8-1.2-M3 5.0 3.5 1.2 M3 450/reel TH-0.8-1.5-M3 1.5 TH-0.8-2.0-M3 2.0 TH-0.8-2.5-M3 2.5 350/reel TH-0.8-3.0-M3 3.0 TH-0.8-3.5-M3 TH-0.8-4.0-M3 4.0 250/reel TH-0.8-4.5-M3 4.5 TH-0.8-5.0-M3 TH-0.8-5.5-M3 5.5 TH-0.8-6.0-M3 6.0 TH-0.8-6.5-M3 6.5 300/reel TH-0.8-7.0-M3 7.0 TH-0.8-7.5-M3 7.5 TH-0.8-8.0-M3 8.0 TH-0.8-8.5-M3 8.5 TH-0.8-9.0-M3 9.0 TH-0.8-9.5-M3 9.5 TH-0.8-10-M3 10 SHINDENKIZAI sdk@mac8sdk.co.jp

Threaded Inserts TH-1.6 series ■Stand-off type threaded inserts. This is mounted on PCB by inserting into through-hole. ■Screws can be inserted from both component and solder side. ■Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. ■Mounter should have automatic recognition system. ■Bulk type (100pcs/pack) is available. ■Recommended PCB Thickness: 1.6t and above ■Current Capacity 　　 ■ Tightening Torque TH-1.6-□-M2 20A TH-1.6-□-M2.6 TH-1.6-□-M3 30A TH-1.6-□-M2 1.5kgf-cm (14.7N-cm) and below TH-1.6-□-M2.6 3kgf-cm (29.4N-cm) and below TH-1.6-□-M3 X dire 5kgf-cm (49N-cm) and below Y dire 3kgf-cm (29.4N-cm) and below P/N A B H M Package TH-1.6-0.5-M2 4.0 2.5 0.5 M2 450/reel TH-1.6-1.0-M2 1.0 TH-1.6-1.5-M2 1.5 TH-1.6-2.0-M2 2.0 TH-1.6-2.5-M2 350/reel TH-1.6-3.0-M2 3.0 TH-1.6-3.5-M2 3.5 TH-1.6-4.0-M2 250/reel TH-1.6-4.5-M2 4.5 TH-1.6-5.0-M2 5.0 TH-1.6-0.5-M2.6 3.1 M2.6 TH-1.6-1.0-M2.6 TH-1.6-1.5-M2.6 TH-1.6-2.0-M2.6 TH-1.6-2.5-M2.6 TH-1.6-3.0-M2.6 TH-1.6-3.5-M2.6 TH-1.6-4.0-M2.6 TH-1.6-4.5-M2.6 TH-1.6-5.0-M2.6 TH-1.6-5.5-M2.6 5.5 TH-1.6-6.0-M2.6 6.0 TH-1.6-6.5-M2.6 6.5 300/reel TH-1.6-7.0-M2.6 7.0 TH-1.6-7.5-M2.6 7.5 TH-1.6-8.0-M2.6 8.0 P/N A B H M Package TH-1.6-0.5-M3 5.0 3.5 0.5 M3 450/reel TH-1.6-1.0-M3 1.0 TH-1.6-1.5-M3 1.5 TH-1.6-2.0-M3 2.0 TH-1.6-2.5-M3 2.5 350/reel TH-1.6-3.0-M3 3.0 TH-1.6-3.5-M3 TH-1.6-4.0-M3 4.0 250/reel TH-1.6-4.5-M3 4.5 TH-1.6-5.0-M3 TH-1.6-5.5-M3 5.5 TH-1.6-6.0-M3 6.0 TH-1.6-6.5-M3 6.5 300/reel TH-1.6-7.0-M3 7.0 TH-1.6-7.5-M3 7.5 TH-1.6-8.0-M3 8.0 TH-1.6-8.5-M3 8.5 TH-1.6-9.0-M3 9.0 TH-1.6-9.5-M3 9.5 TH-1.6-10-M3 10 SHINDENKIZAI sdk@mac8sdk.co.jp

Threaded Inserts THB series Non-threaded type inserts for PCB through-hole. PCB is mounted above the chassis by inserting screws from the component side of PCB to tapped holes on the chassis. Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. Bulk type (100pcs/pack) is available. Bulk type does not have adsorption cap. ■Material: Brass ■Finish: Sn plating over Ni ■Recommended PCB Thickness: 1.6t P/N A B C L H Package THB-1.5-2 4.5 3.0 2.1 1.5 0.0 400/reel THB-2.1-2 0.5 THB-2.6-2 2.6 1.0 THB-3.1-2 3.1 THB-3.6-2 3.6 2.0 THB-4.1-2 4.1 2.5 THB-4.6-2 4.6 200/reel THB-5.1-2 5.1 3.5 THB-5.6-2 5.6 4.0 THB-6.1-2 6.1 THB-6.6-2 6.6 5.0 THB-1.5-2.6 2.7 THB-2.1-2.6 THB-2.6-2.6 THB-3.1-2.6 THB-3.6-2.6 THB-4.1-2.6 THB-4.6-2.6 THB-5.1-2.6 THB-5.6-2.6 THB-6.1-2.6 THB-6.6-2.6 THB-1.5-3 5.5 THB-2.1-3 THB-2.6-3 THB-3.1-3 THB-3.6-3 THB-4.1-3 THB-4.6-3 THB-5.1-3 THB-5.6-3 THB-6.1-3 THB-6.6-3 SHINDENKIZAI sdk@mac8sdk.co.jp

Threaded Inserts THC1.6 series ■Stand-off type non-threaded inserts. This is mounted on PCB by inserting into through-hole. ■Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. ■Mounter should have automatic recognition system. ■Bulk type (100pcs/pack) is available. ■Bulk type does not have adsorption cap. ■Material: Brass ■Finish: Sn plating over Ni ■Recommended PCB Thickness: 1.6t and above P/N A B C H Package THC-1.6-0.5-2 4.5 3.0 2.1 0.5 450 THC-1.6-1.0-2 1.0 THC-1.6-1.5-2 1.5 300 THC-1.6-2.0-2 2.0 THC-1.6-2.5-2 2.5 250 THC-1.6-3.0-2 THC-1.6-3.5-2 3.5 200 THC-1.6-4.0-2 4.0 THC-1.6-4.5-2 400 THC-1.6-5.0-2 5.0 THC-1.6-5.5-2 5.5 350 THC-1.6-6.0-2 6.0 THC-1.6-6.5-2 6.5 THC-1.6-7.0-2 7.0 THC-1.6-7.5-2 7.5 THC-1.6-8.0-2 8.0 THC-1.6-0.5-2.6 3.6 2.7 THC-1.6-1.0-2.6 THC-1.6-1.5-2.6 THC-1.6-2.0-2.6 THC-1.6-2.5-2.6 THC-1.6-3.0-2.6 THC-1.6-3.5-2.6 THC-1.6-4.0-2.6 THC-1.6-4.5-2.6 THC-1.6-5.0-2.6 THC-1.6-5.5-2.6 THC-1.6-6.0-2.6 THC-1.6-6.5-2.6 THC-1.6-7.0-2.6 THC-1.6-7.5-2.6 THC-1.6-8.0-2.6 THC-1.6-8.5-2.6 8.5 THC-1.6-9.0-2.6 9.0 THC-1.6-9.5-2.6 9.5 THC-1.6-10-2.6 10.0 *You can order THC-0.8 Series P/N A B C H Package THC-1.6-0.5-3 5.5 4.0 3.1 0.5 450 THC-1.6-1.0-3 1.0 THC-1.6-1.5-3 1.5 300 THC-1.6-2.0-3 2.0 THC-1.6-2.5-3 2.5 250 THC-1.6-3.0-3 3.0 THC-1.6-3.5-3 3.5 200 THC-1.6-4.0-3 THC-1.6-4.5-3 4.5 400 THC-1.6-5.0-3 5.0 THC-1.6-5.5-3 350 THC-1.6-6.0-3 6.0 THC-1.6-6.5-3 6.5 THC-1.6-7.0-3 7.0 THC-1.6-7.5-3 7.5 THC-1.6-8.0-3 8.0 THC-1.6-8.5-3 8.5 THC-1.6-9.0-3 9.0 THC-1.6-9.5-3 9.5 THC-1.6-10-3 10.0 SHINDENKIZAI sdk@mac8sdk.co.jp