CSC303 Team 1

Introduction Use a Cisco 7600 technology to connect the following networks: 2 OC3 Ethernets -- fiber 2 T3 Ethernets -- fiber 8 T1 Ethernets -- twisted pair Cat baseT networks baseT uplinks to The Internet

Packet Over SONET/ SDH (POS)Cards Available Cisco 2-Port OC-3 POS SPA Cisco 4-Port OC-3 POS SPA Cisco 1-Port OC-12 POS SPA Cisco 1-Port OC-192 POS/RPR SPA 2-Port OC-48 POS/DPT 1-Port OC-48 POS 2-Port OC-12 POS 4-Port OC-12 POS 4-Port OC-3 POS 8-Port OC-3 POS 16-Port OC-3 POS

Cisco 4-Port OC-3c/STM-1c POS Shared Port Adapter 2 OC3 Ethernets – fiber /ps6267/product_data_sheet0900aecd8027cb4d.html

Serialized/Channelized Cards Available Cisco 4-Port Serial SPA Data Sheet Cisco 8-Port Channelized T1/E1 SPA Cisco 2-Port Channelized T3 SPA Cisco 4-Port Channelized T3 SPA Cisco 2-Port Clear Channel T3/E3 SPA Cisco 4-Port Clear Channel T3/E3 SPA 1-Port ChOC-12 to DS3 1-Port ChOC-12 to DS0 12-Port CT3 to DS0

Cisco 4-Port Channelized T3 (DS-0) Shared Port Adapter 2 T3 Ethernets -- fiber 267/product_data_sheet0900aecd8027cb3f.html

Ethernet Cards Available Cisco 2-Port GE SPA Cisco 5-Port GE SPA Cisco 10-Port GE SPA Cisco 1-Port 10-GE SPA GE-WAN-2 Cisco 4-Port 10GE ES20 2-Port 10GE ES20 20-Port GE Express Forwarding /100/1000 Interface Module 10 Gigabit Ethernet

Cisco Express Forwarding /100/1000 Interface Module 8 T1 Ethernets -- twisted pair Cat baseT networks baseT uplinks to The Internet oduct_data_sheet0900aecd e_ps4835_Products_Data_Sheet.html

Cisco

Cisco slots available Backplane Capacity: 320Mbps Two power sources

Cisco 7604 Layout Diagram

Network Diagram

Conclusion Explanation for each cards chosen: Cisco 4-Port OC-3 POS SPA We decided to choose this card over the others available because it supports four OC-3 ports in a half card and we will have available ports for future expansions. Cisco 4-Port Channelized T3 SPA For this type of connection we decided to go with 4 ports for future expansion and we only had two options: the 4-port channelized T3 SPA and 4-port clear channel T3/E3 SPA We chose the 4-port channelized because the it is unnecessary to have support for E3 ports (E3 ports are used in European countries). Cisco Express Forwarding /100/1000 Interface Module This card supports the remaining requirements for this project, and leave 8 empty ports for future expansion. 8 T1 Ethernets -- twisted pair Cat baseT networks baseT uplinks to The Internet

Bibliography 368/products_relevant_interfaces_and_modules.html 368/products_relevant_interfaces_and_modules.html 368/prod_models_comparison.html 368/prod_models_comparison.html html html 368/products_relevant_interfaces_and_modules.html 368/products_relevant_interfaces_and_modules.html