Emulsions are suspension of droplets, greater than 0,1 micron in diameter, consisting of two completely immiscible liquids, one of which is dispersed throughout.

Slides:

Advertisements

Similar presentations

UAB Ekotakas flocculants

Advertisements

Institute of Chemical Engineering page 1 Achema 2012 Mechanical Process Engineering Dipl.-Ing. Dr. Thomas Laminger Univ. Prof. Dr. Wilhelm Höflinger Contact:

Chapter 3 Elements, Compounds, and mixtures Introduction to Matter

Pure substance Only one kind of material

2.3 Separating the Substances in a Mixture

Emulsion Coolant Recovery System-InstaPure for Recovery and Reuse of water soluble coolants. Pure Tech India, A-5, Trec step, Thuvakudi, Trichy

Food Chemistry Chapter 17 in Green / Damjii Chapter X in Nuess Chapter X in Oxford Study (no resource in Chang)

Abstract - When an oil and liquid crystal mixture are droplets appear, coalesce and line up along the director. We searched for ways to control the direction.

Mixtures and Solutions

On Earth, matter usually can be found as a solid, liquid, or gas. What are elements?

WASTEWATER TREATMENT. A drop of hazardous substance can be enough to pollute thousands of gallons of water, so it is vitally important to accurately and.

What is Fairy Liquid really for?Fairy Liquid. What happens when you mix oil and water? Oil and water can’t mix, so you form two layers. We call these.

 Triatomic molecule  Contains covalent bonds  Includes partial positive and partial negative charges  Where do these charges come from?

Appearances of an object including: mass, magnetism, physical state, relative density, solubility, and the ability to insulate or conduct heat or electricity.

 Sample of matter, either a single element or a single compound, that has a definite chemical & physical properties  Made of only 1 type of particle.

Solutions & Other Mixtures Heterogeneous Mixtures Amount of each substance in different samples of mixture varies.

Emulsions Emulsion suitable for intravenous injection.

Copyright © Pearson Education, Inc., or its affiliates. All Rights Reserved.. Chapter 2 Matter and Change 2.1 Properties of Matter 2.2 Mixtures 2.3 Elements.

Concentrations & Solutions

HAUS Decanters in Waste Oil Treatment Presented by Venkatesh Narayan, P.Eng.

Pure Substance Mixture 1.Components are not chemically combined. 2.Ratio of components can vary.

Chapter 15 “Water and Aqueous Systems”. Section 15.3 Heterogeneous Aqueous Systems l OBJECTIVES: –Distinguish between a suspension and a solution.

Solutions and Other Mixtures

Mixtures. mixture -a mixture is a combination of two or more substances that ARE NOT chemically combined (they DO NOT form a compound!) EXAMPLE: Pizza.

Matter, Change and Energy. Review Physical Change A change that DOES NOT change the chemical compostion of a substance. Examples: melting (and all.

P.O.D What is the new pressure of a 2 L gas sample when the temperature increased from 100 C to 132 C and the pressure was initially measured.

BHAVITREAT DMF Foam control agent for paper and board production Technical Information Formerly Bhavi International Ltd.

Pure Substances, Mixtures, and Solutions. Pure substance: matter that has a fixed (constant) composition and unique properties. Contains only 1 type element.

COS 2.0, 2.1, 2.2, 2.3 IDENTIFY SOLUTIONS IN TERMS OF COMPONENTS, SOLUBILITY, CONCENTRATION, AND CONDUCTIVITY. COMPARE SATURATED, UNSATURATED AND SUPERSATURATD.

Mixtures and Their Separation Zhang Qi International Department of HACFLS.

Mixtures and Solutions. MATTER is solid liquid gas melts to freezes to evaporates to condenses to anything that has mass and takes up space can be.

Emulsions Continued.

What are Oilfield Chemicals? Oilfield chemicals are those which are used in oilfields to increase the process efficiency, productivity of the oil and.

WHAT MAKES A DETERGENT WORK & FACTORS THAT AFFECT CLEANING

DAILY QUESTION November 10, What is a solvent and a solute?

Objective 6 Test Friday October 30 th will cover notes from now to Thursday October 29 th.

are you throwing away the expensive metal working coolants? Green Machines. Bangalore.

Functional and chemical properties of fats

Sources of solid waste. Waste water. gas emissions

Heater-Treater Units Heater-Treater Units PTRT xxxx Chapter xx

Subject: Fluid Flow Operation

DECANTER Prepared By: Bhaumik Parikh ( )

Chapter 15 Water and Aqueous Systems 15.3 Heterogeneous Aqueous

Cutting Fluids.

Module 4 Classification of Matter by Composition

Ways to separate mixtures – Chapter 3: Matter & Its Properties

Mixtures and Solutions

Properties of Matter Extensive properties depend on the amount of matter that is present. Mass Volume.

Refinery: Separation units

Mixtures and Solutions

Different ways that water mixes with different substances

Emulsion De-sensitisation

Treatment of Produced Fluids:

Mixtures and Solutions

Treatment of Produced Fluids: Crude Oil and Water:

ISMR Technology Transfer Seminar

12.7 – NOTES Heterogeneous Mixtures

Demulsification of Water-Oil Emulsion by Nano-Structured Surfaces

Ways to separate mixtures – Chapter 3: Matter & Its Properties

Classification of Matter

0:56 0:55 0:54 0:53 0:57 0:58 1:02 1:01 1:00 0:59 0:52 0:51 0:44 0:43 0:42 0:41 0:45 0:46 0:50 0:49 0:48 0:47 1:03 1:04 1:19 1:18 1:17 1:16 1:20 1:21 1:25.

Different ways that water mixes with different substances

What is a Mixture? A mixture is a combination of 2 or more substances that have not been chemically bonded (no chemical reaction occurred)

Pure Substances, Mixtures, and Solutions

Key Ideas What is a heterogeneous mixture?

Ways to separate mixtures – Chapter 3: Matter & Its Properties

Presentation transcript:

Emulsions are suspension of droplets, greater than 0,1 micron in diameter, consisting of two completely immiscible liquids, one of which is dispersed throughout the other. The most widely used method of treating oil emulsions is chemical demulsification. Poliflock trademark demulsifiers are high efficiency mixture of one or several substances for water in oil or oil in water separation. These products have powerfull wetting properties causing quick and effective emulsions separation. As the result of intensive development it is available wide range of Poliflock demulsifiers.

Poliflock brand demulsifiers can be used for emulsion breaking in following processes: petroleum and petrochemicals refining and processing oilfield produced water treatment tanker ballast water treatment tramp oils from machine tool coolants utility operations, sanitary sewage, contaminated surface runoff Slop oil spillages and separation processes.

Poliflock demulsifiers are used with following equipment: Three-phase decanters Skimmers Separators Flotation units Hydro cyclones Centrifuges Filters Coalescing units

Usually stable oil emulsions can contain up to % of water. It is common that slop oil forms such a stable emulsions that even after long time heating in separation towers low or almost no separation appears. Heat is usually required to resolve water in oil emulsions. After adding Polifloc demulsifier it is possible achieve 5 to 0 % water content in oil. Typical dosages are 0,5-6kgs/m3 of emulsion. The adjustment of pH can be neccessary.

Poliflock range demulsifiers: Poliflock SM 01A Poliflock SR 4567 Poliflock SR 4567-s Poliflock SM 1001 Poliflock SM 01B Poliflock SM 01C Poliflock SM 01D Poliflock SM 01E Poliflock SM 251 Poliflock SM 11 Poliflock SM 12 Poliflock SM 01D Poliflock SM 01E

Poliflock demulsifiers benefits: Provides rapid, sharp three phase separation No heavy metals or organic halides added Covenient to handle, easily dispersed

For inquieries and technical consultations: UAB Ekotakas Savanorių 435 Kaunas LT Lithuania/EU Tel Fax Thank you for attention!