All rights reserved. Copyright © 2008 Argox Information Co., Ltd ISO 9001:2000 F1 Commercial & Light Industry Printer

Product Strategy : Primary Features 4.17-inch(106mm) direct thermal/thermal transfer printer 203 dpi print resolution and up to 6-ips(152mm/s) printer speed 32 bit CPU and 4 MB Flash; 8 MB SDRAM memory standard Multiple communication interface-parallel, serial, USB&PS/2 Up to 15,000 labels output per day, Baud rate is bps Enhanced media sensor function-reflective and transmissive Add head-open sensor and built-in buzzer warning system Back-lit LCD display, LED and button operation interface for easy-to-use Side-open cover and clear media window, built-in Tear off bar

Product Strategy : Primary Features No ribbon wrinkle with centralized thermal print head 360M ribbon & 8-inch media compartment Inside/outside ribbon auto-switch and centralized ribbon & label path Enhanced cutter and peeler module design for quick maintenance Stand-alone operation through PS/2 interface PPLB emulation and one binary file firmware more fast upgraded Enhance Auto-form function Add 1D/GS1 & 2D/QR barcode Soft fonts are downloadable (Up to 72 points) Full range of options : Cutter, Dispenser, RTC card, Stacker Font card, Argokee,

Product Strategy : Technical Details CategoryConceptTechnical Details New Design User Friendly Twin-Eyed Sensor System & Light Pipe Design Unique Media Guide Lock & Floating Reflective Sensor Design Ribbon Inside/Outside Auto-Switch Technology Buzzer Warning System LCD & LED Operating Display Quick Maintain TPH Pressure Adjustable Design Roller Quick Installation Cutter & Peeler Module Design Improved Design User Friendly Flexible Media Holder & Shaft Shaft Media Design For Stabilizing Paper Loading Head Open Sensor Bracket Metal Lock & Linking Lever One-Button Calibration Function Quick Maintain Cutter Jam Detecting Sensor Backfeed Function Skip to Product Application

Product Strategy : Technical Details New Design Twin-Eyed Sensor System & Light Pipe Design For Detecting Label Gap Effectively Unique Media Guide Lock & Floating Reflective Sensor Design Ribbon Inside/Outside Auto-Switch Technology Buzzer Warning System LCD & LED Operating Display TPH Pressure Adjustable Design Roller Quick Installation Cutter & Peeler Module Design For Ease Of Use

Twin-Eyed Sensor System Front of printing module Twin-eyed Sensor System : no.1 centralized & no.2 fixed in left side Default is no. 1 centralized transmissive sensor The LED light pipe for detecting label gap effectively Back of printing module

The benefits of Twin-Eyed Sensor System (Transmissive Sensor) Twin-Eyed Sensor System For 1-inch width label situationFor hole label situationFor notch label situation 1-inch width label such as Wristband in healthcare application Select No.1 transmissive sensor to detect the hole on label Select No.2 transmissive sensor to detect the notch on label

Unique Media Guide Lock & Floating Reflective Sensor Design Right & left side media guide, and unique holder lock design to stabilize the paper in printing situation Push the black button and then adjust the media guide to fit the paper width Floating reflective sensor design for closing to the backing paper reinforces precise gap detection

According to ribbon supply and receive to Install ribbon on printer, and then print Easier to use and no need to remember how to install inside/outside ribbon Ribbon Inside/Outside Auto-Switch Technology Ribbon receive Ribbon supply

Buzzer Warning System All of fail situations happened, Buzzer will beep to be a warning and fail message also be shown on panel Turn-off Buzzer : Select Authorised Setup1 / ALERT BUZZER function from panel to turn-off Buzzer Print label when head open Head open alert phenomenon  3 beeps  Alert - Red light flash  LCD – head open Cutter jam problem

LCD & LED Operating Display 2 × 16 line LCD LED indicators × 2 Button × 6 Basic Setup Authorised Setup 1 Authorised Setup2 3 level selection for user friendly

TPH Pressure Adjustable Design New lock way design for easier and quick to replace TPH TPH pressure adjustable and default is the lowest pressure Front TPH horizontal position adjustable design

Roller Quick Installation 18mm bigger size roller for better printing quality Quick and easy to install and replace roller

Cutter & Peeler Module Design Module design for Ease of use Peeler Module : Cutter Module : (Baby-board built inside) Link the connectorLock the screw × 2 Lock the right and left screw × 2 Lock into hole on the printer Link the connector

Product Strategy : Technical Details Improved Design Flexible Media Holder & Shaft Media Shaft Design Head Open Sensor Bracket Metal Lock & Linking Lever One-Button Calibration Function Cutter Jam Detecting Sensor Backfeed Function

Product Strategy : Technical Details Improved Design –Flexible Media Holder & Shaft for loading 1-inch and 3-inch core and adjust width –Media Shaft Design for stabilizing paper loading

Improved Design –Cutter Jam Detecting Sensor for solving cutter jam problem Jam detecting sensor When cutter jam, the fail message will be shown on panel, stop printing and Buzzer sounding Turn off Buzzer function : Authorised Setup 1 level / ALERT BUZZER –Backfeed Function Cutter or Peeler mode available to set up with or without backfeed function Options on panel : Authorised Setup 2 level / ADVANCED CUT Authorised Setup 2 level / ADVANCED PEEL Product Strategy : Technical details

Product Strategy : Technical details Improved Design –Head Open Sensor Sensor bar to control sensor –Bracket Metal Lock & Linking Lever Metal Lock before push the button Head open –One-Button Calibration Function : only push feed button, no re-calibration required when change media size,