NS1000 Version 2 Document for SE and Sales Training KX-NS1000 Version 2 Summary Rev 1.2D January 10, 2013 Panasonic System Networks PBX SE team Specifications and schedule are subject to change without notice.

Table of Contents No. Feature Improvement Document 1 E1/PRI adapter on SIP trunk of KX-NS1000 1. PRI E1 Adapter + 2. Stacking Card xxx.ppt 2 Stacking card for TDA/TDE/NCP connection 3 KX-NT phone capacity 128(V1) to 256(V2) per one NS1000 Page 6 in this PPT 4 Network survivability 4. Network Survivability xxx.ppt 5 KX-NT5xx phone support UT based hardware for improved hands-free NT based software for full PBX features 5. NT5xx_QRG.pdf 6 SBC for KX-UT Phone (See Reference Folder) 7 KX-UDT UT based IP System DECT 8 Other Improvement Click to link Click to link Click to link 2

Introduction

1. E1 / PRI Adapter When customers want to use IP-Phone (*) mainly for extension and they want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with new trunk adapter is recommended because KX-NS1000 supports more IP capacity and IP functionality than KX-NCP or KX-TDE. (*) - KX-NT / KX-UT by Panasonic - NT based software phone by Panasonic - SIP hardware phone by other maker - SIP software phone for PC, Android, iPhone and so on Panasonic KX-NS8290 PRI30 Trunk Adaptor SIP Extension PRI30 Model Specifications KX-NS8188X E1 adapter on SIP trunk KX-NS8290CE PRI30 adapter on SIP trunk KX-NS8290X PRI23 adapter on SIP trunk SIP Trunk (30-ch) KX-NS1000 PRI Card IP Network KX-NCS0290 215 mm (W) 44 mm (H) 200 mm (D) 500g KX-NT KX-UT Other SIP Phone SIP Softphone 4

2. Stacking Card Version 2.03 for TDA/TDE On the other hand, when customer has Panasonic PBX now, they can add IP capacity and IP functionality using KX-NS1000 version 2 with stacking card KX-NS0130 with keeping current PBX. This configuration is useful for new customer also when they need more SLT phone, Digital PT with DSS Console, Analog PT and analog CO as well as IP-Phone. KX-NS0130 SC card for NS100 KX-NS0131 SC card for NCP KX-NS0132 SC card for TDA/TDE Before adding KX-NS1000 After adding KX-NS1000 Analog CO Analog CO Direct Connection like TDE600 to TDE620 KX-TDE KX-TDE KX-NS1000 CO Card CO Card MPR Card SC Card SC Card EXT Card EXT Card KX-NCS0130 100 % Feature Transparency like TDE600 to TDE620 IP Network SLT KX-DT w/ DSS Console KX-NT KX-UT Other SIP Phone SIP Softphone SLT KX-DT w/ DSS Console Version 2.01 supports both NCP and TDA/TDE. 5

3. KX-NT Phone Capacity Increase Total capacity is as follows. Line NS1000 x 1 NS1000 x 2 NS1000 x 3 NS1000 x 4 or more Trunk 256 256 x 2 600 Legacy by stacking card or/and “xxx+SLT2” card IP incl E1/PRI adapter SIP H.323 48 48 x 2 = 96 Extension 640 1000 Digital PT / Analog PT / SLT by stacking card or/and “xxx+SLT2” card 480 SLT (*1) 512 DPT (*2) IP UT NT (NS1000 V1) 128 128 x 2 128 x 3 128 x N or 1000 NT (NS1000 V2) 256 x 3 (*1) 24SLT x 10 by TDE620 x 2 for example (*2) 256 DPT incl DXDP by TDE620 x 2 for example 6

4. Network Survivability Back-up is available automatically for SIP trunk incl E1 / PRI adapter, KX-NT/UT IP-phone and one look connection. PRI/E1 or SIP Provider Back-up master PBX works as slave PBX usually. But it works as master PBX after master PBX stops working. Trunk Adaptor KX-NS1000 (2nd) Back-up Master SIP Trunk One-Look AK One-Look AK KX-NS1000 (1st) Master KX-NT KX-UT KX-NT KX-UT PRI/E1 or SIP Provider Trunk Adaptor After master PBX stops working, KX-NS1000 Back-up Master SIP Trunk One-Look AK One-Look AK KX-NS1000 Master KX-NT KX-UT KX-NT KX-UT

5. KX-NT500 KX-NT500 is supported. - KX-NT500 hardware is based on KX-UT for improved hands-free compare to KX-NT3xx - But software is based on KX-NT3xx for full PBX feature support. - Quantity of key is increased for full PBX feature support. - SBC cannot be used because not SIP based. KX-NT543 : 3-line LCD KX-NT546 : 6-linie LCD ⑨ Message ⑩ Pause ⑪ Flash ⑫ Redial ⑬ Auto Ans ⑭ Conf ⑮ Transfer ⑯ Auto Dial ⑰ Fwd/DND ⑱ Hold ⑲ Cancel ⑳ Intercom ⑳ SP-Phone

6. SBC for KX-UT Phone SBC is available for KX-UT phone for remote connection. KX-NS1000 version 1 works SBC for standard SIP protocol only. Therefore SBC works for 3rd party SIP phone or KX-UT registered as 3rd party SIP phone. KX-UT registered as 3rd party SIP phone needed AK for SIP phone (Not AK for KX-UT/NT phone). And it cannot use PBX flexibility key or PBX speed dial data download. However KX-UT phone with KX-NS1000 version 2 can work as KX-UT phone even in remote office as well as KX-UT phone in the office. Remote Office or Home HQ NS1000 IP Network SBC KX-NT KX-UT work as UT (V1/V2) KX-UT work as UT (V2) KX-UT work as 3rd party SIP Phone (V1)

8. Other Improvement - 1 Blind Transfer (Refer) is supported for 3rd party SIP phone. 10 Jan. 2013 TDE/NCP NS1000 Version 2 Transfer Ad-hock Conf. Transfer (by REFER method) Attended Unattended Blind Media5 (Media5-fone) OK N/A - n/a (No feature) Counter Path (Bria Android, V1.1.5.41701) Counter Path (Bria iPhone, V2.3.2) 3CX (Softphone) Grandstream (GXP280) Yealink (T22P) Screened Unscreened Screened Unscreened <Transfer definition> Attended Transfer: Transfer is completed after announcing the destination party. Unattended Transfer: Transfer is completed without an announcement. After dialing the destination, while hearing a Ring back tone, the originator can execute the transfer. Blind Transfer: Transfer is completed without hearing a Ring back tone. (without operation to initiate 2nd call with sending INVITE)

8. Other Improvement - 2 Web-MC is improved. - Response speed is faster than version 1. - Copy feature is added.

8. Other Improvement - 3 KX-UT670 can work as KX-UT from version 2.04. (Not as 3rd party SIP phone) Version 2.04

Thank you ! The END