Rejuvenated MiCOM P40 Double the practicality Henri GRASSET Summer 2014

Double the Practicality Double the security – further enhanced cyber security with RBAC Double the interoperability – IEC61850 Ed1 & Ed2 Double the availability Dual IP ports – 2 Independent Ethernet Channels Seamless and unparalleled redundancy with HSR & PRP Double the quality Long proven protection algorithms Upgraded with well-known Schneider Electric Quality Double the service – QR code for supporting information Double the ease-of-use – advanced MiCOM S1 Studio tool

IEC 61850 based Protection Schemes Latest standards Fully secure, from product to solution Cost optimized and Reliable Enabled by powerful new Ethernet

New powerful Ethernet solutions Hardware: Dual IP ports (2 IPs) PRP* and HSR* redundancy (IEC 62439) Universal Irig-B port (Modulated and un-modulated) Software enhancements: IEC 61850 Ed. 2 (and Ed.1) Cyber Security evolutions E3 requirements (Spain) *PRP: Parallel Redundancy Protocol *HSR: High-availability Seamless Redundancy

Cost optimized and Reliable PRP* and HSR* communication redundancies Choice made via configuration Allows seamless redundancy (no loss of any information) Optimizes the Ethernet network availability and cost Dual port (2 IP Addresses) Allows two physically segregated /independent networks Universal Irig-B (Modulated and un-modulated) Plug & Play: No need of configuration Easy to connect to any kind of Irig-B technology IEC 62439 Standard: *PRP: Parallel Redundancy Protocol *HSR: High-availability Seamless Redundancy

Fully Secure Cyber Security Not only about ”Cyber” attacks A “Must have” requirement in many countries and environments Not only about ”Cyber” attacks Enables: Confidentiality, Integrity, Availability & Authentication, Non-Repudiation, Accountability, Traceability & Detection Available now! Standard in the latest MiCOM P40 Configuration security enabled by the Security Admin Tool (SAT)

Latest Standards IEC 61850 Edition 2.0 (or Edition 1) Choice made via configuration Open, interoperable and well recognised standard Reduces Engineering time and allows better interoperability Spain E3 requirements: Essential for Spanish Utilities and Spanish influenced markets HSR and PRP CID* file transfer via Ethernet for Ed2 (“MCL” file for Ed.1) Time synchronization configuration and monitoring to E3 requirements *: Configured IED Description

Why Dual IP? Ethernet has become the main technology for Protection & Control Redundancy is a fundamental necessity for Protection Schemes based on GOOSE and especially for high availability environments Standardized HSR, PRP (active redundancy) enables: Interoperability and Interchangeability 0 ms reconfiguration time, thus no loss of data (as no reconfiguration) Full compatibility with the IEC 61850 requirements LAN B LAN A P40 P40

Optimised Network Topology 1/2 HSR for Protection HSR for Protection Ring A Ring B Control RedBox RedBox Network 1

Optimised Network Topology 2/2 HSR HSR Ring A Ring B PRP RedBox 1 RedBox 2 RedBox 3 RedBox 4 Network 1 Network 2

Implementation Dual IP Ethernet allows 2 fully segregated Station Bus networks Realistic examples include: Duplicated Network for Protection and Control (P&C) Segregated Networks for Control….. And for Protection Segregated Networks for P&C ..... And for Maintenance Segregated Networks for P&C ..... And for Digital Fault Recording System (DFRS) Segregated Networks for P&C ..... And for I/O expansion with P849 DCS