Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training Basis – Parameterization Fv frequency converter 1

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training System parameter Agenda Operating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeedSimple PLC 2

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training System parameter Agenda Operating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 3

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training b0.00 b0 b1 Output frequency Output speed Reference frequency User defined Output frequencyPress Func to H0 Press Set b0.00 to b0.15 System parameter Agenda Operating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 4

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training b0 b0.00 XXXX b0.15 XXXX b1 b1.00 XXXX b1.15 XXXX S0 S0.00 XXXX S0.15 XXXX S1 S1.00 XXXX S1.15 XXXX S2 S2.00 XXXX S2.15 XXXX S3 S3.00 XXXX S3.15 XXXX E0 E0.00 XXXX E0.15 XXXX E1 E1.00 XXXX E1.15 XXXX E2 E2.00 XXXX E2.15 XXXX E3 E3.00 XXXX E3.15 XXXX E4 E4.00 XXXX E4.15 XXXX H0 H0.00 XXXX H0.15 XXXX System parameter Agenda Operating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 5

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptionStandard b0.00User Password 0 to b0.01LCD Language 0: Chinese; 1: English 0 b0.02 Restore factory default 0: No action 1: Restore parameter to factory default 0 b0.03 Parameter copy 0: no action 1: Copy from frequency converter to operating panel 2: Copy from operating panel to frequency converter Note: The value is automatically set to 0 after parameter copy. 0 b0.04Mains voltage 380 to 480 V 380 b0.05 PWM frequency 1.0 to 15.0 kHz Depends on model b0.11 Parameter filter setting 0: b Paremeter 1: b, S Parameter 2: b, S, E Parameter 3: b, S, E, H Parameter 0 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 6

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptionsStandard b1.00 Frequency setting mode 0: Set by operating panel potentiometer 0 1: Set by operating panel 2: Set by analog inputs 3: Set by pulse frequency 4: Set by digital inputs Up/Down 5: Set via communication System parameter AgendaOperating panel Field orient.-control V/f control Basic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 7

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptionsStandard b1.02 Frequency converter control commands 0: Set control commands via operating panel 0 1: Set control commands via digital inputs 2: Set control commands via communication b1.03 2: Set control commands via communication 0: V/F control (V/F) 0 1: Senseless vector control (SVC) 2: Field oriented vector control (FOC) System parameter AgendaOperating panel Field orient.-control V/f control Basic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 8

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptionsStandard b1.04Digital set frequencyb1.07 to b Hz b1.05Maximum frequency50.00 to Hz50 Hz b1.06Upper frequency – UFbetween b1.07 to b Hz b1.07Lower frequency – LF0.00 to b1.060 Hz b1.08 Operating panel controlled direction 0: Forward rotation – FWD 1: Reverse rotation – REV 0 b1.09Acceleration time 10.1 to 3600 s10 s b1.10Deceleration time 10.1 to 3600 s10 s b1.16Start Mode 0: Mode 1 (Standard) 1: Mode 2 (DC brake) 2: Rotation speed capture mode 0 b1.17Start frequency0.00 to Hz0.5 Hz b1.19Stop Mode 0: Decelerate to stop 1: Freewheel to stop 0 System parameter AgendaOperating panel Field orient.-control V/f control Basic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 9

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard S0.00V / f Mode 0: Linear Mode 1: Square mode 2: User-defined multipoint mode 0 S0.01V/F frequency to S0.030 Hz S0.02V/F voltage 10.0 % to 120% (of rated motor voltage) (S2.03)0.0 % S0.03V/F frequency 2S0.01 to S0.050 Hz S0.04V/F voltage 20.0 % to 120% (of rated motor voltage) (S2.03)0.0 % S0.05V/F frequency 3S0.03 to b1.050 Hz S0.06V/F voltage 30.0 % to 120% (of rated motor voltage) (S2.03)0.0 % S0.07Slip compensation0.00 to Hz0 Hz S0.08Torque increase at 0 Hz 0.0 automatic increase; 0.1% % of nominal voltage (manual increase) 0.1 % System parameter AgendaOperating panel Field orient.-control V/f control Basic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 10

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard S1.00 Speed feedback proportional gain to S1.01 Speed feedback integral time to s means inactive 1.000s S1.02Torque limit0.0% % of rated motor torque150% S1.03Slip compensation gain0.0 % to 250.0%100.0% S1.04Torque control selection 0: Inputs control (Terminal X1 … X8 Range 17) 1: Always active 0 S1.05Torque control reference 0: Input +I 1: Input VR1 0 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 11

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard S2.00Rated motor frequency8.00 to Hz50.0 S2.01Rated motor speed1 to rpm1440 S2.02Rated motor power0.4 to kW Depends on model S2.03Rated motor voltage0 to 480 V Depends on model S2.04Rated motor current0.1 to A Depends on model S2.10Parameter auto-tuning * 0: no action 0 1: Auto tuning with running motor 2: Auto tuning with static motor * Note: The value is automatically set to 0 after auto-tuning. System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and Encoder Control parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 12

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard S2.12Pulses per revolution of pulse encoder 1 to S2.13Pulse encoder direction reverse 0: No reverse 1: Reverse 0 S2.14Pulse encoder fault detection extent 0.0 no protection 0.1 to rpm (error, if speed set point is smaller than S2.14) 0.0 S2.15Pulse encoder fault detection time 0.1 to 10.0 s1.0 s System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and Encoder Control parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 13

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard S3.07 Restart after power off or power fault 0: Deactivated 1: Activated 0 S3.08 Waiting time to restart after power off or power fault 0.1 to 10.0 s1.0s S3.09Direction change dead time0.0 to s4.0 s S3.10 Droop Control – ( Balances across multiple drives to a load) 0.00 to 10 Hz0.00 S3.11Setting velocity via Up/Down0.10 to Hz /s1.00 S3.14 Motor standard rotation direction 0: Standard motor direction 1: Reverse motor direction 2: Deactivate reverse motor direction 0 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and Encoder Control parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 14

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard E0.00 0: Forward/Stop; Revers/Stop 1: Forward/Revers, Run/Stop 2: 3 Wire control 0 E0.01Terminal X1 0: Inactive 9: Frequency Up 10: Frequency Down 14: Switch between control with operating panel and with digital inputsl 17:Switch between speed control and torque control 18: Switch between VR1 analog reference and +I analog reference E0.02Terminal X2 E0.03Terminal X3 E0.04Terminal X4 E0.05Terminal X5 E0.06Terminal X6 E0.07Terminal X7 E0.08Terminal X8 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 15

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard E1.00 Open collector output OUT1 0: Converter ready to run 1: Converter is running 3: Converter runs at zero speed (up to 11 different functions) 0 E1.01 Open collector output OUT2 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 16

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training Quick set up  Setting language, operating mode, parameter access  Selection control via Operating panel  Enter frequency limitations and acceleration and deceleration times  Enter motor data –motor indentification  Enter encoder data System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 17

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard b0.00User passwordNumber from 0 – (normally 0)0 b0.01LanguageSet b0.01 == 1: English0 b0.11Parameter filter setting Set b0.11 == 3: b, S, E, H parameter read and write 0 b1.00Frequency setting mode0: Set by operating panel potentiometer0 b1.02 Frequency converter control command 0: Set control commands via operating panel0 b1.03Control mode 0: V/f; 1: sensorless vector control (SVC); 2: field orientated vector control 0 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 18

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptionsStandard b1.04Digital Set frequencyBetween b1.07 and b Hz b1.05Maximum frequency50.00 to Hz50 Hz b1.06Upper frequency limitBetween b1.07 and b Hz b1.07Lower frequency limit0.00 to b1.060 Hz b1.08 Operating panel controller direction 0: Forwards – FWD 1: Backwards – REV 0 b1.09Acceleration time0.1 to 3600 s10 s b1.10Deceleration time0.1 to 3600 s10 s System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 19

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard S2.00Rated motor frequency8.00 to Hz50.0 S2.01Rated motor speed1 to rpm1440 S2.02Rated motor power0.4 to kWmodel S2.03Rated motor voltage0 to 480 Vmodel S2.04Rated motor current0.1 to Amodel S2.10Parameter auto tuning 0: No action 0 1: Auto tuning with running motor 2: Auto tuning with static motor System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 20

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard S2.12Pulses per revolution of pulse encoder 1 bis S2.14Encoder fault detection extend 0.0 no protection 0.1 to rpm (error, if: setpoint smaller than S2.14) 0.0 S2.15Encoder fault detection time 0.1 to 10.0 s1.0 s System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 21

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training Variable- and fixed motor frequency set (multi speed)  Set up from up to 15 fixed motor frequencies with adjustable acceleration and deceleration times  Variable motor frequency via analogue input of potentiometer on the operating panel System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 22

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training S1 to S4: selection motor frequency S1 to S4 Off: frequency set point via analogue input or potentiometer S5 and S6: forwards/backwards S 8 S 7 X6 X5 S7 S8: Acceleration and deceleration times System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 23

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training S4S3S2S1Selected frequencyfrequency of parameter OFF Multi speed frequency 0b1.00 OFF ONMulti speed frequency 1E2.06 OFF ONOFFMulti speed frequency 2E2.07 OFF ON Multi speed frequency 3E2.08 OFFONOFF Multi speed frequency 4E2.09 OFFONOFFONMulti speed frequency 5E2.10 OFFON OFFMulti speed frequency 6E2.11 OFFON Multi speed frequency 7E2.12 ONOFF Multi speed frequency 8E2.13 ONOFF ONMulti speed frequency 9E2.14 ONOFFONOFFMulti speed frequency 10E2.15 ONOFFON Multi speed frequency 11E2.16 ON OFF Multi speed frequency 12E2.17 ON OFFONMulti speed frequency 13E2.18 ON OFFMulti speed frequency 14E2.19 ON Multi speed frequency 15E2.20 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 24

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training S8S7Selected timesTime of. Parameter OFF Acceleration time 1b1.09 Deceleration time 1b1.10 OFFONAcceleration time 2E2.00 Deceleration time 2E2.01 ONOFFAcceleration time 3E2.02 Deceleration time 3E2.03 ON Acceleration time 4E2.04 Deceleration time 4E2.05 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 25

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training NrParameterOptions Standard E0.002-wire / 3-wire Control mode 0: Forwards/Stop and Backwards/Stop 1: Forwards/Backwards; Run/Stop 2: 3-wire Control mode 0 E0.01Terminal X11: Multispeed Control 10 E0.02Terminal X21: Multispeed Control 20 E0.03Terminal X31: Multispeed Control 30 E0.04Terminal X41: Multispeed Control 40 E0.05Terminal X55: Acceleration/Deceleration time Terminal 10 E0.06Terminal X66: Acceleration/Deceleration time Terminal 20 System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 26

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training TypeParameterDescriptionSetting rangeFactory Default Acceleration and deceleration times 2, 3, 4 E2.00Acceleration time 20.1 to s E2.01Deceleration time 20.1 to s E2.02Acceleration time 30.1 to s E2.03Deceleration time 30.1 to s E2.04Acceleration time 40.1 to s E2.05Deceleration time 40.1 to s System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 27

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training TypeParameterDescriptionSetting rangeFactory Default Multi speed – frequency E2.06Multi speed frequency 0b1.07 to b Hz E2.07Multi speed frequency 1b1.07 to b Hz E2.08Multi speed frequency 2b1.07 to b Hz E2.09Multi speed frequency 3b1.07 to b Hz E2.10Multi speed frequency 4b1.07 to b Hz E2.11Multi speed frequency 5b1.07 to b Hz E2.12Multi speed frequency 6b1.07 to b Hz E2.13Multi speed frequency 7b1.07 to b Hz E2.14Multi speed frequency 8b1.07 to b Hz E2.15Multi speed frequency 9b1.07 to b Hz E2.16Multi speed frequency 10b1.07 to b Hz E2.17Multi speed frequency 11b1.07 to b Hz E2.18Multi speed frequency 12b1.07 to b Hz E2.19Multi speed frequency 13b1.07 to b Hz E2.20Multi speed frequency 14b1.07 to b Hz System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 28

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training Further settings  Settings referred to quick set up  set b1.02 == 1 (Set Control via external terminals System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals Commissioning Multispeed Simple PLC 29

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training Simple PLC  Adjustment of up to 15 frequency set points with adjustable: - Acceleration and deceleration times - Dwell time for each motor frequency f1 to f15 - Selection of each particular direction System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 30

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training Simple PLC  Selection of different modes - cycle will be driven once - cycle will be repeated - After one cycle the drive runs with the frequency f15  PLC is in all control modes possible: V/f, SVC, FOC  Operation via operating panel or terminals possible  At first set parameters of the list “quick setup” System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 31

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training TypeParameterDescriptionSetting rangeFactory Default Multi speed – frequency E2.23Stage 1 action selection0 to 310 E2.24Stage 1 running time0.0 to s0.0 s E2.25Stage 2 action selection0 to 310 E2.26Stage 2 running time0.0 to s0.0 s E2.27Stage 3 action selection0 to 310 E2.28Stage 3 running time0.0 to s0.0 s E2.29Stage 4 action selection0 to 310 E2.30Stage 4 running time0.0 to s0.0 s E2.31Stage 5 action selection0 to 310 E2.32Stage 5 running time0.0 to s0.0 s E2.33Stage 6 action selection0 to 310 E2.34Stage 6 running time0.0 to s0.0 s E2.35Stage 7 action selection0 to 310 E2.36Stage 7 running time0.0 to s0.0 s System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 32

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training TypeParameterTypeParameterDescription Multi speed – frequency E2.37Stage 8 action selection0 to 310 E2.38Stage 8 running time0.0 to s0.0 s E2.39Stage 9 action selection0 to 310 E2.40Stage 9 running time0.0 to s0.0 s E2.41Stage 10 action selection0 to 310 E2.42Stage 10 running time0.0 to s0.0 s E2.43Stage 11 action selection0 to 310 E2.44Stage 11 running time0.0 to s0.0 s E2.45Stage 12 action selection0 to 310 E2.46Stage 12 running time0.0 to s0.0 s E2.47Stage 13 action selection0 to 310 E2.48Stage 13 running time0.0 to s0.0 s System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 33

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training TypeParameterTypeParameterDescription Multi speed – frequency E2.49Stage 14 action selection0 to 310 E2.50Stage 14 running time0.0 to s0.0 s E2.51Stage 15 action selection0 to 310 E2.52Stage 15 running time0.0 to s0.0 s Settings reaction in step 1 to 15  bit 4 - 0: Forwards - 1: Backwards  bit 3 and bit : Time with parameter and acceleration time 1 [b1.09] - 01: Time with parameter and acceleration time 2 [E2.00] - 10: Time with parameter and acceleration time 3 [E2.02] - 11: Time with parameter and acceleration time 4 [E2.04]  bit 1 und bit : Time with parameter and deceleration time 1 [b1.10] - 01: Time with parameter and deceleration time 2 [E2.01] - 10: Time with parameter and deceleration time 3 [E2.03] - 11: Time with parameter and deceleration time 4 [E2.05] System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 34

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training DecimalBinbit 4bit 2 and bit 3bit 0 and bit FWD b1.09 set with parameter "Acceleration time 1" [b1.09] b1.10 set with parameter "deceleartion time 1" [b1.10] E2.01 set with parameter "deceleartion time 2" [E2.01] E2.03 set with parameter "deceleartion time 3" [E2.03] E2.05 set with parameter "deceleartion time 4" [E2.05] E2.00 set with parameter "Acceleration time 2" [E2.00] b1.10 set with parameter "deceleartion time 1" [b1.10] E2.01 set with parameter "deceleartion time 2" [E2.01] E2.03 set with parameter "deceleartion time 3" [E2.03] E2.05 set with parameter "deceleartion time 4" [E2.05] E2.02 set with parameter "Acceleration time 3" [E2.02] b1.10 set with parameter "deceleartion time 1" [b1.10] E2.01 set with parameter "deceleartion time 2" [E2.01] E2.03 set with parameter "deceleartion time 3" [E2.03] E2.05 set with parameter "deceleartion time 4" [E2.05] E2.04 set with parameter "Acceleration time 4" [E2.04] b1.10 set with parameter "deceleartion time 1" [b1.10] E2.01 set with parameter "deceleartion time 2" [E2.01] E2.03 set with parameter "deceleartion time 3" [E2.03] E2.05 set with parameter "deceleartion time 4" [E2.05] REV b1.09 set with parameter "Acceleration time 1" [b1.09] b1.10 set with parameter "deceleartion time 1" [b1.10] E2.01 set with parameter "deceleartion time 2" [E2.01] E2.03 set with parameter "deceleartion time 3" [E2.03] E2.05 set with parameter "deceleartion time 4" [E2.05] E2.00 set with parameter "Acceleration time 2" [E2.00] b1.10 set with parameter "deceleartion time 1" [b1.10] E2.01 set with parameter "deceleartion time 2" [E2.01] E2.03 set with parameter "deceleartion time 3" [E2.03] E2.05 set with parameter "deceleartion time 4" [E2.05] E2.02 set with parameter "Acceleration time 3" [E2.02] b1.10 set with parameter "deceleartion time 1" [b1.10] E2.01 set with parameter "deceleartion time 2" [E2.01] E2.03 set with parameter "deceleartion time 3" [E2.03] E2.05 set with parameter "deceleartion time 4" [E2.05] E2.04 set with parameter "Acceleration time 4" [E2.04] b1.10 set with parameter "deceleartion time 1" [b1.10] E2.01 set with parameter "deceleartion time 2" [E2.01] E2.03 set with parameter "deceleartion time 3" [E2.03] E2.05 set with parameter "deceleartion time 4" [E2.05] System parameter AgendaOperating panel Field orient.-control V/f controlBasic settings Motor and EncoderControl parameter Input Outp.Terminals CommissioningMultispeed Simple PLC 35

Internal | 01/22/2013 | DC-IA/SFS31 | Carsten Kobusch | Rexroth Parameter Training EN V1.0 | © Bosch Rexroth AG All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Rexroth Fv - Training Automation & Verfahrenstechnik Thank you for your attention 36