Engineer Training XL1200 Software 4.010

Engineer Training XL1200 Software Confidential 2 Print options Archive Print queue Toolbar Preview & Information window Status bar X & Y Resolutions Main Window

Engineer Training XL1200 Software Confidential 3 Main Window – Configuration  Mode: Dependable – on modes chosen in the Config>Printing Modes  Speed: Slow, Medium, Fast  Ink amount: 100 – 800%  Noise  Tiff: , , dpi  Bitmap: 370, 185, 92.5, dpi Note: Depends on Printing Modes used  LUT  Units: Cm, Inch

Engineer Training XL1200 Software Confidential 4 Choose 4,6 or 8 color separations Choose between Importing to the Queue, or to the Archive Import

Engineer Training XL1200 Software Confidential 5 Crop on preview Edit  File info  Skip white  Tiling  Margins  Overlap  Cropping  Backlit  Step and Repeat

Engineer Training XL1200 Software Confidential 6 Maintenance in pause position Import while Printing Print

Engineer Training XL1200 Software Confidential 7 Configuration – Measure 1-3 rolls Measuring

Engineer Training XL1200 Software Confidential 8 Automated Registration tests Media configuration Media tracking X Resolutions Configure

Engineer Training XL1200 Software Confidential 9 Configure (Cont.) To set the registration: 1.Check the nozzle status using nozzles test. 2.Adjust Cyan left and right adjustment. 3.Adjust Magenta Yellow and Black left and right adjustment. 4.Adjust X & Y color alignment. In all these adjustments, use the Built in registration test.

Engineer Training XL1200 Software Confidential 10 Choose which Print Modes should appear on the Main Screen Configure – Print Modes

Engineer Training XL1200 Software Confidential 11 Configure – Print Modes (Cont.)

Engineer Training XL1200 Software Confidential 12 Initialize printer Purging ink through the heads Power supply Go Home Maintenance

Engineer Training XL1200 Software Confidential 13 Material Control Z- tension T- tension – can choose T- Tension direction Backward Forward Dry Last Job

Engineer Training XL1200 Software Confidential 14 Auto-clean Select auto-clean from the tools pop-up menu: 1.Set the purge period. 2.Set the frequency. 3.Set the delay.

Engineer Training XL1200 Software Confidential 15 Color LUT

Engineer Training XL1200 Software Confidential 16 Calibration  Motor calibration  Heads calibration  Backlit adjustment

Engineer Training XL1200 Software Confidential 17 Changing Ink Set Choose the ink set

Engineer Training XL1200 Software Confidential 18 Statistics Information about media use

Engineer Training XL1200 Software Confidential 19 4.X About Software registration

Engineer Training XL1200 Software Confidential 20 General  Backlit printing  Multi roll printing  Super text mode  Skip white  Tracker  File info  Repeat

Engineer Training XL1200 Software Confidential 21 Backlit application provides the option to print on both sides of the media to create a quality and colorful result. Choose backlit Backlit Printing

Engineer Training XL1200 Software Confidential 22 Controls the image position while printing the second side. Controls the X, Y, and rotate adjustment. For detailed information see the backlit chapter in the user manual or the backlit application note. Backlit Printing (Cont.)

Engineer Training XL1200 Software Confidential 23 This unique feature enables the operator to print the same image or different tiles on more than one substrate roll at the same time, and get maximum system utilization. 1-3 rolls For detailed information see the multi-roll chapter in the user manual Multi Roll Printing

Engineer Training XL1200 Software Confidential 24 Super Text Mode 1.A unique single-directional printing technique, Super text. 2.Produces excellent output quality for very small text. 3.Intended for close-viewing applications. When using this special feature, printing is in one direction only (left to right). 4.Easily selected from the Status area of the HP Scitex XL1200. Main Screen when setting printing parameters (Direction), and results in superior quality fine text for the entire print run.

Engineer Training XL1200 Software Confidential 25 Super Text Mode (Cont.)  The Skip White option may be activated when printing images that contain large blocks of white (areas in excess of approximately 100 cm in height) which do not require printing.  This useful feature (also known as logical seeking) saves time, and is easily activated from the Edit dialog box when setting printing parameters.

Engineer Training XL1200 Software Confidential 26 Media tracking Tracker  The Skip White option may be activated when printing images that contain large blocks of white (areas in excess of approximately 100 cm in height), which do not require printing.  This useful feature (also known as logical seeking) saves time, and is easily activated from the Edit dialog box when setting printing parameters. Default: Repeats info of previous slide! Default: Repeats info of previous slide!

Engineer Training XL1200 Software Confidential 27 File Info The File Info option provides the facility to print details on a header at the top of each copy of a printed image.  Useful for identifying the image file name and other specifics, such as: date, time, copy number, printing parameters, etc.  Option is enabled from the Common settings in the Edit dialog box.

Engineer Training XL1200 Software Confidential 28 Repeat This option allows you to print as many copies as you need Horizontally – meaning if we have a small image and a wide media, it will fit the copies along the width of the media.  Example: if we have a 5m media, and a 1.5m wide image, it will fit 3 times on the media, so we select 3 copies and check the Repeat option. If we print 4 or more copies, the 4th copy will be printed on the next row.  The Gap field is in cm.