ELECTRICAL SAFETY KIT CZ-53-R Service Marketing Produits /C.LAY 12/06/2002 Marketing CATU

CASE COMPONENTS 20 000V AC an insulating stool a yellow telescopic stick a hook fitted with a detector a cable cutter a pair of insulating gloves a protection bag for the gloves a pair of boots a talcum bottle An adhesisive tape for marking “First aid” poster Instructions for use Marketing CATU

Marketing CATU

CASE Overall dimensions of the complete case: 710x570x240 mm Weight: 18,5 Kg (including equipment) Colours: red (stool) + grey (bottom of case) 2 parts fitted together by locking clamps Round shape to prevent injury during transport Case stable, both in horizontal and vertical positions Large handle for improved convenience Marketing CATU

BOTTOM OF CASE The accomodation provided in the base of the case is for storing and securing the package items. Two large side locks in the case. Marketing CATU

STOOL This new product has the innovative feature of a case, the top part of which can be detached and used as a stool. Marketing CATU

TECHNICAL SPECIFICATIONS OF THE STOOL Operating voltage: 24 000 V 4 feet Well-dimensioned plate (non-slip): 600x450 mm Stability maintained when the user leans against an outside edge of the platform No metal parts Marking: CATU /24 000 V Solid plastic material Complies with dielectric, impact, load and behaviour specifications Marketing CATU

The stool will feature two icons :  one of which shows that you must not get on the stool when it is assembled in the base of the case:  and the other showing that only the stool should be used: Marketing CATU

TELESCOPIC STICK (MT-830-P) Quick unfolding of the three parts Can be locked by pushing or pulling Is designed to carry both the detector and rescue hook Nominal 45 KV insulation Marketing CATU

ELECTRONIC VOLTAGE DETECTOR (Base CC-127) The detector responds to all voltages exceeding or equal to 127 V (127 V-90 KV) Detector fitted with self-test button, so as to carry out a complete self-check of the unit Voltage ON indicated by: a timed light from a red electro-luminescent diode (high luminosity) a timed, audible, high-powered signal (60 dBA) Designed in accordance with standard NFC 18-311 The detector forms an integral part of the hook, but will not withstand the forces, which may be applied to the hook Marketing CATU

HOOK Metal painted with a “C” shaped end-piece (hexagonal) Marketing CATU

CABLE CUTTER CZ-60 Cable cutter with insulated sleeves Forged steel blade Nominal 25 KV insulation Maximum opening: 30 mm Approximative weight: 2,2 KG Marketing CATU

INSULATING GLOVES CG-30 Operating voltage: 26,5 KV IEC 60903 Supplied with a protection bag Marketing CATU

TALCUM BOTTLE This is provided to powder the inside of the gloves to facilitate fitting, following multiple use Marketing CATU

INSULATING BOOTS MV-135 Size : 43/44 These are designed to protect the operator from electric shocks Colour: brown Live working up to 20 000 V According to the EN 345 specification Boots entirely made of molded rubber. This eliminates the risk of detachment between the sole and the body They protect the linesman against the electrical risks of voltage when stepping on the ground or differences in potential that may develop on the support during the work Marketing CATU

DELINEATOR TAPE AT-5005 This is used to delimit and highlight the danger areas (quick to apply) 100 m roll Marketing CATU

INSTRUCTIONS FOR USE Equipment use explained in the form of icons Display on plastic backing Size: 150x290 mm This display is clipped onto one of the vertical walls of the case. It can be removed for ease of reading Marketing CATU

INSTRUCTIONS FOR USE recto Marketing CATU

INSTRUCTIONS FOR USE Marketing CATU verso

INSTRUCTIONS FOR USE Marketing CATU verso

english version: CZ-53-R « FIRST AID » Poster english version: CZ-53-R Marketing CATU

French Ministry Approval: Marketing CATU