Emergency Response Presented by Geoff Mason

Slides:



Advertisements
Similar presentations
Radiation Protection Legislation Stephen McCallum
Advertisements

Health and Safety Committees RENZO BERTOLINI Canadian Centre for Occupational Health and Safety.
Enrollment49,500 Enrolled for Transportation24,800 Enrolled for Special Transportation560 Total Miles each day24,520 Total Miles each year4.4 million.
Assessment.
IAEA International Atomic Energy Agency. IAEA Outline Learning objectives Introduction Functions of Regulatory Body (RB) on EPR Appraisal guidance: Part.
Be prepared before it happens!! Have procedures and policies in place before you have to respond to a retrieval. Training- Have personnel that are.
Alexander Brandl ERHS 561 Emergency Response Environmental and Radiological Health Sciences.
Understanding the management of risks to health and safety on the premises of a retail business Unit 352.
PELLET PLANT LAY DOWN TRAFFIC MANAGEMENT POLICY COMMUNICATION.
Gauges and well logging
Radiation Safety in Industrial Radiography
Radiation Safety Training
Regulatory Body MODIFIED Day 8 – Lecture 3.
Workplace Safety and Health Program
Health and Safety Legislation
OHSAS 18001: Occupational health and safety management systems - Specification Karen Lawrence.
Management of emergencies in industrial radiography
AL FURAT PETROLEUM CO. NORM MANAGEMENT SYSTEM
WHS Management Plans.
Industrial Radiography Basic Safety Requirements
EMERGENCY PLAN AND PROCEDURE IN INDUSTRY INVOLVING NORM/TENORM
Health and Safety.
EPR-Public Communications L-03 Types of Radiation Emergencies and Communicating Safety.
Protection Against Occupational Exposure
Occupational Health, Safety & Environment Training Incident Reporting & Investigation.
Bapetco NORM Control Case Study IDENTIFY ASSESS CONTROL & RECOVERY.
Risk Assessment – An Essential Standard
Hazardous Waste and Emergency Response
Occupational health and safety
High Potential Incident Intervention. Background 2 The principle policy of Downer Blasting Services regarding to our staff is “Zero Harm” The success.
Occupational Health & Safety
Authorization and Inspection of Cyclotron Facilities Inspections.
Joint ACAC/ACI Seminar on Certification of Aerodromes Marrakech, 5–6 September 2003 David Gamper, Director, Technical/Safety Airports Council International.
Basics of OHSAS Occupational Health & Safety Management System
IPEN : Ciencia y tecnología para la competitividad INSTITUTO PERUANO DE ENERGÍA NUCLEAR - IPEN FINDINGS AND PRELIMINARY RESULTS ON THE VENTANILLA ACCIDENT.
Category: - Consultancy Service Contracts (Other than PMC)
Government of Western Australia Department of Mines and Petroleum Please read this before using presentation This presentation is based on content presented.
Health and Safety Executive REGULATION OF INDUSTRIAL RADIOGRAPHY IN UK David Orr HM Specialist Inspector of Health and Safety (Radiation) Health and Safety.
Health and Safety Policy
PROMOTE HEALTH AND SAFETY IN THE WORKPLACE Written and devised by John Eaton.
Emergency Procedures Within a workplace, there should be well-defined emergency procedures. Your employer is obliged to establish these procedures, and.
Merchant Shipping (Code of Safe Working Practices) Regulations Statutory Instrument 1998 No
Organization and Implementation of a National Regulatory Program for the Control of Radiation Sources Regulatory Authority.
Periodic Review of JHA Reviewing job hazard analysis ensures that it remains current and continues to prevent accidents and injuries. It is possible that.
RSSO refresher meeting J. Pedersen M. Tavlet, T. Otto.
Nearmiss Presentation
Organization and Implementation of a National Regulatory Program for the Control of Radiation Sources Inspection Part III.
Authorization and Inspection of Cyclotron Facilities Radiation Protection of Staff.
IAEA International Atomic Energy Agency Industrial Radiography Emergency Preparedness Day 5 – Lecture 8.
Radiation Safety Regulations
ISM Code 2010: Part A - Implementation Malcolm Maclachlan.
Health & Safety in Construction 4A7 Design & the Built Environment John O’Connor.
Safety Management Standards. Introduction Health and Safety Procedures (which identify the risks, hazards and ways of mitigating these) are weak in that.
Working Procedure with Ionizing Radiation 1. Introduction Introduction Classification of Areas Classification of Areas Safe Handling/Use of Safe Handling/Use.
CDM Construction Design and Management
Meet your Regulator Workshop with FANR licensees October 2011 Dr. John Loy Director, Radiation Safety Federal Authority for Nuclear Regulation.
Health & Safety Management “and a few other things for your consideration”
Process Safety Management Soft Skills Programme Nexus Alliance Ltd.
MANAGING MANUAL HANDLING
Training Module Preparation for “AERB norms, licenses and signage”
Maintaining Safety Standards
Occupational Radiation Protection during High Exposure Operations
Maintaining Safety Standards
Safety Accountabilities
People Responsible For Health and Safety
Safety is part of our culture at Halliburton
Legal and Organisation requirements for data recording
ESS Handbook for Radiation Protection
Radiation Protection Handbook
Effective Construction Safety Management
Presentation transcript:

Emergency Response Presented by Geoff Mason Training and Radiation Safety Manager Oceaneering International Services

Emergency Response The ability to deal with and resolve a range of Emergency situations may be dependant upon a variety of differing factors. Location of incident Environment Other Hazards associated with the incident Severity of potential dose rates Availability of trained and experienced personnel Procedures and protocols relevant to the incident

Emergency Response Organisations involved in the practice of Industrial Radiography will need to develop a culture of being prepared for, and be capable of planning and carrying out these interventions, within the guidelines of the ALARP / ALARA principles Planning / Risk Assessment Procedures / Guidance documents Availability of Emergency Equipment Personnel Training Rehearsal

Planning The UK Ionising Radiations Regulations 1999 require that Radiation Employers Carry out a ‘Risk Assessment’ prior to any work involving the use of ‘Ionising Radiation’ Where an accident / incident is reasonably foreseeable, the employer shall prepare a Contingency Plan Where appropriate, rehearse the arrangements in the plan and suitable intervals

Procedures / Guidance Documents Specific Contingency plans as part of Local Rules All Oceaneering radiographers are given a copy of General Local Rules and Contingency Plans Handbook The handbook contains all current contingency plans Copies of handbook kept in Emergency Kit

Procedures / Guidance Documents Contingency Plans are covered in detail during the RPS training and the Road Transport training Managers are provided with guidance and awareness during their ‘Managing the Radiation Risk’ training Oceaneering has produced a document for senior management and no-radiographic personnel entitled ‘Classification of Radiation Incidents’. This provides guidance regarding the severity of a particular radiation related incident.

Classification of Radiation Related Incidents Major incident resulting in the loss of life, serious injury and potential long term effects due to radiation exposure Serious injury, potential long term effects due to excessive radiation exposure Cat II Lost or stolen sources and or containers Catastrophic incident resulting in loss of radiation containment Loss of Oceaneering control of exposure equipment and or facilities Serious breach of safety and security of radioactive materials

Classification of Radiation Related Incidents Cat III Excessive exposure to radiation over and above stipulated regulatory requirements ( may be Cat I) Radiation source fails to retract safely into container/camera X-Ray set fails to switch-off/terminate after exposure Non-compliance with regulatory requirements Cat IV Poor working practice, non compliance with company procedures, and or local rules Damage to exposure equipment, no excessive radiation or risk

Emergency Equipment There is no defined list of equipment that must be made available for emergency situations. Different types of exposure equipment may require different types of tools and associated equipment Sentinel model 880 - requires a full emergency kit Sentinel model 959 (SCAR) – Recovery Tool and Dosimeter Sentinel model 989 (Baby SCAR) – Specific recovery kit

Emergency Equipment A standard Oceaneering Emergency Kit will comprise of -: 1 or 2 m long handling tongs Bags of lead shot ( minimum of 2 x 2kg bags) Bolt cutters Hack saw (full size) Emergency Pot / Container Pocket dosimeter or EPD Tarpaulin Assorted hand tools (relevant to the container type) Copy of the Local Rules and Contingency Plans Handbook

Personnel The only people trained to carry out source recovery (Isotope Retrieval) are the company appointed Radiation Protection Supervisors, in addition, they are generally the ‘first responder’ for most types of incident. Drivers of vehicles that are carrying Sources are trained to the Contingency Plans that are specific for transportation – as a minimum, drivers are generally a level 1 or level 2 radiographer

Training The initial response to most radiation safety incidents will be the Radiation Protection Supervisor (RPS). As part of his training, he will have received training and instruction on – Contingency Plans Practical Source Recovery Detached and Jammed sources Annual source recovery practice Calculations Stay Time Dose Rates Dose Assessments Shielding

Rehearsal Contingency rehearsals are carried out regularly. RPS’s run through a series of contingency plan scenarios each year Unauthorised Entry to Controlled Area Practical detached source recovery Road Transport contingencies Several clients also require a practical source recovery exercise to be performed on site to demonstrate the effectiveness of the training and the contingency plans

Response to an Incident **Retrieval / recovery of a detached source** With a detached source, there a various methods of recovery, each company will have a preferred method The first responder to most incidents on site will be the Radiographic crews RPS. His initial role is the make the source as safe as possible – push the source into the collimator so it is in a known position, or attenuate Ensure the barriers are manned and monitored

Response to an Incident The next step is to assess the situation and identify the problem Invoke the appropriate ‘Contingency Plan’ During the assessment process Calculate a Stay Time to receive a pre-determined dose Assemble the correct Emergency equipment Prepare and wear the dosimeter Assess the environment / work location The source is at a known position within the collimator held in position by the drive cable

Response to an Incident Remove or release the collimator/guide tube from the pipe or structure Retract the drive cable Ensure the floor is clear, or lay a tarpaulin down Disconnect guide tube from container Using long handling tongs, lift the collimated end of the guide tube and allow the source to fall to the ground Pick the source up with the tongs and place into emergency pot/container

Response to an Incident RPS and all involved to produce a written statement, these are to be passed to the Radiation Safety Manager All TLD’s to be sent away for analysis Radiation Safety Manager will initiate a full investigation and liaise with the appropriate regulatory bodies Results of the investigation will be forwarded to the regulator and disseminated within Oceaneering

Radiation Incident Flowchart Initial assessment by RPS, or the appointed person Request assistance from Radiation Safety Manager / Snr RPS No Is RPS capable of dealing with the incident Yes RPS and team deal with incident Guidance and advice given by RPA – DGSA etc RPS liaises with local management

Radiation Safety Manager Carry out investigation Radiation Incident Flowchart - continued Incident reported by local manager RPS/DGSA Police EA/SEPA Radiation Safety Manager Fire Service CTSA ONR HSE PHE (TLD) Carry out investigation Produce Report Produce Bulletin