2006/09/081 Motorised DucoClose FITTING INSTRUCTIONS

2006/09/082 Product Motorised DucoClose Type I: Single motor operation (left- or right-side fitting) Type II: Dual motor operation (centre)

2006/09/083 Exploded View Motorised DucoClose

2006/09/084 Parts breakdown Linear actuator Make : LINAK Stroke length (working stroke) : 30 mm / thrust (feeding force) : 300 N Code : G (PT050174) Stainless steel M6x35 hexagon head bolt DIN 933 Code : G (PT040130) Double yoke bracket Dual control, top-mounting Code : G (KS060069) Self-locking M6 hexagonal nut DIN 985 stainless steel Code : G (PT030347) Single yoke bracket Single control, top-mounting Code : G (KS060068) Collar bushing MFM Code : G (PT040132) Motorised DucoClose

2006/09/085 Parts breakdown Stainless steel M6 washer DIN 125-A Code : G (PT030346) Self-locking M5 hexagonal nut DIN 985 stainless steel Code : G (PT040072) Countersunk M5x55 bolt DIN 7991 Code : G (PT040071) Bottom foot mounting for dual operation control Code : G (KS060069) Stainless steel M5 washer DIN 125-A Code : G (PT050100) Bottom foot mounting for single operation control Code : G (KS060064A) Motorised DucoClose

2006/09/086 Parts breakdown S/steel 3.5x13 mm DIN 7504 self-drilling screw Code : G (PT050039) Countersunk M5x35 bolt DIN 7991 Code : G (PT060080) Motorised DucoClose

2006/09/087 Assembly TYPE I : SINGLE MOTOR OPERATION (left- or right-side fitting TYPE I : SINGLE MOTOR OPERATION (left- or right-side fitting) Motorised DucoClose a.Fix the single yoke bracket (G ) to the top of the actuator (G ) using the 2 collar bushings (G ), and secure with a M6x35 hexagon bolt (G ) and an M6 check nut (G ).

2006/09/088 Assembly TYPE I : SINGLE MOTOR OPERATION (left- or right-side operation) Motorised DucoClose b.Secure the bottom foot mounting (G ) for single motor operation into position with two 3,5x13 mm self-drilling screws (G ) at 216 mm measured from the underside of the handle support bracket (G , see MTI DucoClose). Make sure the support bracket fits flush with the outside of the Ducoclose. 216 mm

2006/09/089 Assembly TYPE I : SINGLE MOTOR OPERATION (left- or right-side operation) Motorised DucoClose c.First, fit the actuator (G ) to the bottom foot mounting with 2 collar bushings (G ) and fix in position using two M6x35 hexagon bolts (G ) and two M6 check nuts (G ). d.Next, secure the actuator on its top with a countersunk M5x35 bolt (G ), an M5 washer (G ) and an M5 (G ) check nut.

2006/09/0810 Assembly TYPE II : DUAL MOTOR OPERATION (centre) Motorised DucoClose a.Fix the double yoke bracket (G ) to the top of the actuator (G ) using the 2 collar bushings (G ), and secure with a M6x35 hexagon bolt (G ) and an M6 check nut (G ).

2006/09/0811 Assembly TYPE II : DUAL MOTOR OPERATION (centre TYPE II : DUAL MOTOR OPERATION (centre) Motorised DucoClose b.Secure the bottom foot mounting (G ) for dual motor operation into position with two 3,5x13 mm self-drilling screws (G ) at 216 mm measured from the underside of the handle support bracket (G , see MTI DucoClose). Make sure the support bracket is fitted right in the middle of the DucoClose. 216 mm = =

2006/09/0812 Assembly TYPE II : DUAL MOTOR OPERATION (centre) Motorised DucoClose c.First, fit the actuator (G ) to the bottom foot mounting with 2 collar bushings (G ) and fix in position using two M6x35 hexagon bolts (G ) and two M6 check nuts (G ). d.Next, secure the actuator on its top with a countersunk M5x55 bolt (G ), an M5 washer (G ) and an M5 (G ) check nut.