Treater Oil & Water Valves

Treater Oil & Water Valves Kimray Treater Valve

Treater Oil & Water Valve

Treater Valve Balanced against upstream pressure Weights may be added to increase liquid head Balanced against downstream pressure or vacuum Can be manually opened and closed Standard weight holds 4 feet of liquid head Teflon packed rotary stuffing box

Treater Valve Operation Vessel gas pressure Gas pressure plus liquid head Downstream pressure or vacuum

Installation Notes Do not install a regulator anywhere in gas equalizing line. Do not use equalizing Line as a source of Gas for any other device. Do not bow equalizing line or water will collect and freeze or cause uneven operation Note liquid drain on gas equalizing line. Opening vent valve will cause treater valve to open.

Installation Notes 12 feet 4 feet Standard weight & arm 2 weights & 29” arm

Trouble Shooting Stuffing box nut loose Salt crystals on stem Teflon packing worn Soft seat worn Removable seat worn Either diaphragm off center Stuffing box nut too tight Soft seat leaking Diaphragms hardened Infrequent draining of drip pot Leaking stuffing box Valve will not shut off tightly Erratic Operation Freezing water on Main Diaphragm

Repair Hints Do not over-tighten Stuffing box nut

Repair Hints Tighten 4 screws evenly. Center and align diaphragm plate before bolting housing down. Do not over-tighten pivot screw.

26 DM Diaphragm Motor Valve

26 DM Diaphragm Motor Valve From Production Equalize to gas space Adjusting blocks should be moved to adjust for spread. Weight is positioned for maximum height. Supply in 15 to 20 psig. Meter Must be larger in Diameter than flow lines