Using the Avanti Tabletop Centrifuge As demonstrated by Joe Toney.

Slides:

Advertisements

Similar presentations

WHIRLPOOL Vertical modular Washer

Advertisements

Zebra® 105SL™ * Removing and Installing Printhead

Engineer Training XL1200 Pneumatics. Engineer Training XL1200 Pneumatics Confidential 2 Working Concept Overview: The Pneumatic System is comprised of:

So you want to do a presentation in the Council Chamber?? No problem, here’s how… Note: If you are using the laptop to conduct your presentation, either.

TSI Nephelometer Zero Filter Assembly Zero filter valve Zero filter Zero filter motor Metal flange.

Centrifuges. Topics  Principle of Operation  Diagrams  Applications  Types of Centrifuges  History  Safety  Operation  Preventive Maintenance.

Golf Cart: Rules BE CAREFUL!!! Do not goof off No more than two (2) people on the cart –Must be in the seats –No riding in trailer or back of cart Treat.

How to carry out experiments using MPMS March 2012 Takeshi NAKAGAWA.

TLA. Replacing The Battery On the Back of the pager press in this button while moving the door away from the pager, then lift up. On the Back of the pager.

Basic Features Voic message indicator

ESI Phone System Training Adcom/Valentine Systems

University of Manitoba A How to Guide for Theatre B & C.

M100 M100 Overview Preparation & Testing. M100 Overview  The M100 is a computerized tabulator that optically reads then counts and totals specially designed.

One Source Smarter Packaging Solutions WELCOME TO THE SAMUEL STRAPPING SYSTEMS BALER TRAINING PROGRAM Baler Overview Making a.

Memmert Oven (in yellow room) The door is opened by pulling the door knob, and is closed by pushing in the door knob. Control module /display Control module.

MyLock 644D Service Seminar.

10-AU Calibration 3 Main Steps A) Setting the basic operating level B) Blanking the instrument C) Calibration with a known concentration standard.

4Identifying Leakage Source (Mech/ Elec) 4Mechanical Air Leak- Down 4Mechanical Air Leak- Up 4Electronic Drift- Up/ Down 4Load Cell Operation 4Understanding.

SAFETY MEETING Off Highway Trucks. Brakes There are four separate controls used for braking Service Brake Retarder Secondary Brake Parking Brake.

1 Zebra 170 XiIII Plus Removing and Installing Printhead Calibrating Head Resistance Print Quality Adjustments.

Steps for performing monthly service on the biotizer ® Dispenser The time to service the biotizer ® dispenser is less than one minute.

5300 CNC CONTROL TRAINING GUIDE. 1. Turning the Control ON After the control has been turned ON press F10 to continue. Then press ENTER to select CNC.

Clean Air Box Usage & Care CABs RAMs CO Monitors.

Mitsubishi RA90 4 axis Wire EDM

AccuMax Multi-Point Injection Mechanics

Programming instructions.. To set the time Pool pump and heat pump must be ON. Pictrue 1Picture 2Picture 3 1.Press, the hour will flash (picture 1) 2.To.

After Receiving this error code, Follow these steps to correct the problem… Click for next slide.

Next Slide Introduction to the Drill Press Created by Mr. Heck.

+ USING THE POWER CHARGER AND BATTERY MINI-DV CAMCORDER Connect the charger to the power cord Attach the battery to the charger Plug it in and watch for.

Lubricus – settings and changes LUB-B-1 LUB-B-2 LUB-V-1 LUB-V-2 Grützner GmbH – Kohlenhofstr. 60 – Nürnberg Lubricus Schmiersystem –

3D Micromanufacturing Lab. [1] Centrifuge. [2] 3D Micromanufacturing Lab. What is a centrifuge? A centrifuge is a piece of equipment, generally driven.

Clinical Laboratory equipment. Clinical laboratory is equipped with various biomedical instruments, equipments, materials and reagents for performing.

Introduction to the Calculator Based Ranger (CBR).

Operator Course. Trace Sampling Equipment Overview Analysis Calibration Course Overview.

The Headphones1 Trainer Training The Headphones. 2 There are three sets of headphones There are three transmitters Transmitters also act as battery chargers.

H2 Zoom Recorder Operational Procedure. In the box All H2 Zoom kits contain –1 GB SD Card –Mic Clip Adaptor –Wind Screen –Earbuds –USB Cable –AC Adaptor.

Student Support Services Laptop Workshop. What will you Find The actual Computer The Power Cord (Comes in two parts.)

© 2008 Masimo Corporation RAD-57 EMS Carry Case Lightweight: 13 oz. Small: 6.2” x 3.0” x 1.4” Portable: operates on 4 “AA” batteries Supplied with high-visibility,

Connecting and Configuring Clickers. InterWrite PRS - Clicker 2-line LCD Display See data entered Confirmation answer received Variety of question types.

Handheld Delivery Customer Feedback Survey March 2013.

Module-6 Drilling.

Engineer Training Pneumatic System Overview. Engineer Training Confidential 2 Working Concept Overview: The Pneumatic System is comprised of:  Y Pistons.

Turning on your Computer 1- Check to see that the little green light on the edge of your monitor (screen) is on too. If it's not, the screen may have its.

IPad Basics For Students Set Classroom Rules.

(glass pipette, centrifuge, spectrophotometry)

AJ5808/5808A INFUSION PUMP QUICK OPERATION GUIDE.

1 THE VICTOR READER WAVE ● Plays DAISY books as well as music and books on MP3 or audio CD ● Powerful navigation features ● Go directly to any page number.

Basic MAC Troubleshooting. Kernal Panic Error A kernel panic during startup can have many possible causes, including: Hardware Devices Corrupted file.

HOW TO DO INVENTORY WITH DESTINY. Administrator logs in.

BioRad Sputter Coater  Instructions for gold coating a SEM sample.  NO, it’s not your eyes. This image is out of focus.

Power Fit Training Congratulations! Now that you have completed your test – you are ready for your training. This training program is based off the level.

Fabrication of Fishtank Reservoir ENGR 121 living with the lab.

By Christian Grecco. Drill Press 5. Hold material securely with a vice or clamps. 6. Be sure the chuck key is removed from the chuck before starting the.

AUDIO VISUAL TRAINING Bruce Hall-Smart Class. SMART CLASS EQUIPMENT Smart Class LCD Projector/Built In Screen Control Panel Credenza (DVD/VCR & P.C. inside)

Machine Safety Rules. Miter Saw Instructor must be present when you are using this machine. Keep wood flat and against fence Hold down wood Do not remove.

STEP 1 Locate the transmission cooler line connection on the vehicle. Identify the correct adapters to be used by referring to the vehicle application.

On/off switch Depth stop Quill lock chuck Tilting table Lower table or base Variable speed pilot wheel motor Feed handle Table locking clamp column.

All Freezer Advance. When the Freezer is first supplied with power or if a power outage occurs, the display will indicate this by flashing the temperature.

Steps for Saving Work to My Flash Drive. 1. Plug in your flashdrive. 2. Type or draw in your application. 3. When you are ready to save, left “file” 4.

DermaLase HR operating manual. Turn on the machine and wait for 2 minutes HR mode (Hair Removal) 1.Press HR button (button color changes) 2.Press Energy.

Chapter 5: Equations Equations are a way to describe relationships using mathematical symbols. V = IR voltagecurrent resistance.

Louisiana State University Radiation Safety Office

Laboratory instruments

Next Slide Introduction to the Drill Press Created by Mr. Heck.

Drill Press Safety.

Square Tube Shaft Connecting Both Gear Drives.

Call to Fix Canon Pixma MX340 printer Error 5200

LIGHTING OVEN Steps to Follow.

2. ATP INITIALIZATION PLACE ATP SWITCH TO “1” OR “NORMAL” POSITION A

Main Unit Establishment

Presentation transcript:

Using the Avanti Tabletop Centrifuge As demonstrated by Joe Toney

Turn on the power switch

Select the proper rotor for your tubes

Remove from cover

Make sure spacers are inserted * * F2402 Rotor only Little Red Spacers

Seat rotor on drive shaft Shaft

Secure rotor to shaft with bolt Bolt

Tighten bolt with rotor wrench

Place your tubes in the rotor Tubes of equal mass opposite one another Hinges up

Don’t forget the lid! Hand tighten

Make sure the door is seated properly* The door open light will be lit (green) when door is properly closed. The machine won’t run if it is not. The sound you hear is the refrigeration turning on.

The control panel Open Door Light Start Button Rotor and speed read out and controls Time Temperature

Select rotor Press rotor button, current rotor will be displayed Press rotor button, current rotor will be displayed Use up and down arrow keys to scroll through choices Use up and down arrow keys to scroll through choices Small rotor is F2402 (holds 24 Two ml tubes) Small rotor is F2402 (holds 24 Two ml tubes) Press enter key to select Press enter key to select

Change settings by selecting the parameter, scrolling, and then press enter Up and Down Scroll Keys Set Value with Enter Button

Speed can be set according to RPM Machine displays Speed in RPM Speed Light is lit

Or by relative centrifugal force (RCF, x g) Joe selects RCF button Value flashes Value flashes Value can be adjusted by scrolling up or down Value can be adjusted by scrolling up or down Value is set by pressing enter button Value is set by pressing enter button

Other adjustments Time – set desired time in minutes Time – set desired time in minutes Temperature – this should be set at 4 o C Temperature – this should be set at 4 o C Accel(eration) / Decel(eration) – no need to adjust unless special conditions Accel(eration) / Decel(eration) – no need to adjust unless special conditions

Press start when you are ready to go! The speed read out will display zero, then increase to set level Any problems will develop before about 2000 rpm If there is a problem, it will shut down and give an error message The most common problem is the DOOR OPEN light!

When the run has stopped (0 minutes, 0 rpm) press the open door button

The lid will open

Remove your samples and follow the house rules “Turn the power off”

Take that rotor out

Put it back in its home

And Joe is all done, …. or is he? C0650 Rotor for 50 ml conical tubes