3D Machine Control Systems GCS900 for Dozers GCS900 for Graders GCS900 for Excavators CCS900 for Compactors

Station Content Guide the presenter of the sub-stations should cover the following content at the different machines (sub-stations) cover the points listed per machine (sub-station) and repeat constantly the points from the next slide show the configuration which we have installed and on display so that the customer understands the parts of the system show flexibility in terms of AccuGrade or GCS900 depending on what is installed on the machines (sub-stations)

Grade Control Systems GCS900 & Compaction Control Systems CCS900 3D Machine Control Systems Flexible and interchangeable from machine to machine and machine type to machine type Supported from one Control Box with one onboard software Full support of 2D functionality also on the CB430 Multilingual support Wide range of configurations in hard- and software Support of the base-station free use of satellite based augmentation services (SBAS) Available for all machine manufacturer and also as factory fitted Trimble Ready pre-installation

GCS900 – Grade Control System for Dozers 3D machine control system for dozers Indicating or fully automatic controlled Multiple configurations Dual GPS/GLONASS antenna Single GPS/GLONASS antenna & Cross Slope Sensor GPS/GLONASS antenna plus Laser Augmentation UTS Total Station Laser Receiver Blate Rotation (6-way-blade) and Blade Rolling (mast leaning) is supported Provides fine grading accuracies <2-3cm with GPS/GLONASS <3-5mm with UTS

Trimble GCS900: 3D Dozer – UTS & Cross-slope CB430 LB400 MT900 SNR SNM930 or Harness Power Module PM400 Valve Module VM4X0 Crossfall Sensor AS400 Mainfall Sensor AS400 (optional for blade rolling) Rotation Sensor RS400 (optional for blade rotation)

Trimble GCS900: 3D Dozer – GNSS & Cross-slope CB430 LB400 MS9X0 SNR SNM930 or Harness Power Module PM400 Valve Module VM4X0 Crossfall Sensor AS400 Mainfall Sensor AS400 (optional for blade rolling) Rotation Sensor RS400 (optional for blade rotation)

Trimble GCS900: 3D Dozer – Dual GNSS CB430 LB400 Dual MS9X0 SNR SNM930 or Harness Power Module PM400 Valve Module VM4X0 Mainfall Sensor AS400 (optional for blade rolling)

GCS900 – Grade Control System for Graders 3D machine control system for dozers indicating or fully automatic controlled multiple configurations Dual GPS/GLONASS antenna Single GPS/GLONASS antenna & Cross Slope Sensor GPS/GLONASS antenna plus Laser Augmentation UTS Total Station Laser Receiver Blade Rolling (mast leaning) is supported Provides fine grading accuracies <2-3cm with GPS/GLONASS <3-5mm with UTS

Trimble GCS900: 3D Grader – UTS & Cross-slope CB430 LB400 MT900 SNR SNM930 or ST400 (opt) Harness Power Module PM400 Valve Module VM4X0 Mainfall Sensor AS400 Mainfall Sensor AS400 (optional for blade rolling) Crossfall Sensor AS400 Rotation Sensor RS400

Trimble GCS900: 3D Grader – GNSS & Cross-slope CB430 LB400 MS9X0 SNR SNM930 or ST400 (opt) Harness Power Module PM400 Valve Module VM4X0 Mainfall Sensor AS400 Mainfall Sensor AS400 (optional for blade rolling) Crossfall Sensor AS400 Rotation Sensor RS400

Trimble GCS900: 3D Grader - Dual GNSS CB430 LB400 Dual MS9X0 SNR SNM930 or Harness Power Module PM400 Valve Module VM4X0 Mainfall Sensor AS400 (optional for blade rolling)

GCS900 – Grade Control System for Excavators 3D machine control system for the excavator bucket Configurations: Dual antenna GPS/GLONASS system Single antenna GPS/GLONASS system UTS Single system Multiple language support Multiple bucket support Tilt bucket support VA boom support Indication system Available for all machine manufacturers and sizes Provides fine grading accuracies <2-3cm with GPS/GLONASS or UTS

Trimble GCS900: 3D Excavator - UTS CB430 LB400 MT900 SNR SNM930 or Harness Rototilt AS455 (optional) Platform AS21-2 Boom AS450 Stick AS450 Bucket AS450 Tilt-bucket AS450 (optional)

Trimble GCS900: 3D Excavator - Single GNSS CB430 LB400 MS9X0 SNR SNM930 or Harness Rototilt AS455 (optional) Platform AS21-2 Boom AS450 Stick AS450 Bucket AS450 Tilt-bucket AS450 (optional)

Trimble GCS900: 3D Excavator - Dual GNSS Dual MS9X0 SNR CB430 LB400 SNM930 or Harness Rototilt AS455 (optional) Platform AS21-2 Boom AS450 Stick AS450 Bucket AS450 Tilt-bucket AS450 (optional)

CCS900 - Compaction Control System for Rollers 3D Compaction Control System for Soil Compactors In-cab QA/QC indicating system Configurations: GPS/GLONASS Single roof or drum mounted with Cross-Slope Sensor AS400 GPS/GLONASS Dual drum mounted UTS configuration drum mounted with Cross-Slope Sensor AS400 Compaction Sensor CM310 as an option Provides compaction information over the entire job CMV mapping, on-screen graphical indication and map inspection RMV on-screen indication Cut/Fill mapping Proofing mode Trimble SiteVision® Office Compaction Module for analysis and reporting and documentation

Trimble CCS900: 3D Soil Compactor – UTS CB430 LB400 MT900 SNR SNM930 or Harness Power Module PM400 Crossfall Sensor AS400 (opt) Compaction Sensor CM310 (opt)

Trimble CCS900: 3D Soil Compactor – Single GNSS SNR MS9X0 CB430 LB400 SNM930 or Harness Power Module PM400 Crossfall Sensor AS400 (opt) Compaction Sensor CM310 (opt)

Trimble GCS900: 3D Soil Compactor – Dual GNSS Dual MS9X0 SNR CB430 LB400 SNM930 or Harness Power Module PM400 Compaction Sensor CM310 (opt)

Trimble MCS Family Summary With the Trimble GCS family upgrading is easy MCS = Common parts MCS = Upgradeable MCS = A system that grows with you GCS Grade Control Systems + CCS Compaction Control Systems -------------------------------------------------------- = Productivity from one single provider You have a choice of technologies and configurations Select the one most suited to your job site and accuracy requirements The product grows with you!!