VoIP Training 2010 RMIT STAFF 27 April 2015

RMIT University ITS Training 2 Introduction VoIP trainer Session time Training room

RMIT University ITS Training 3 Topics and range Navigate the 1140E VoIP Use it basic features of the phone Make a call Answer a call Handsfree Hold Mute In this session you will learn the following Transfer a call Autodialing Volume control Call forward Personal directory Voic Online documentation

RMIT University ITS Training 4 Figure 1.0

RMIT University ITS Training 5 Making a call There are several ways of making a call. Pick up the handset –Dial extension number –Dial 0 for external number –Dial 9 for the operator Press the Handsfree key on the bottom left hand corner –Handsfree key lights up RED –Dial the number Press the Line key Press Goodbye key or replace handset to end a call

RMIT University ITS Training 6 Make a call 1.Lift the Handset to make a call 2.Dial number 1.For external dial 0 2.Dial 9 for the operator 3.Press Goodbye key or replace handset to end call

RMIT University ITS Training 7 Make a call - Handsfree 1.Press the Handsfree key, this will light up RED 2.Dial number Users can talk hands free or pick up handset for private conversation 3. Press Goodbye key or replace handset to end call

RMIT University ITS Training 8 Make a call - Line key 1.Press the Line key 2.Dial the number 3.Press Goodbye key to end call or hang up the handset

RMIT University ITS Training 9 Hold function Put a caller on hold 1.Press the Hold key while connected to the caller 2.Press the line key to retrieve call 1

RMIT University ITS Training 10 Mute key 1.Press the Mute key (flashing red light show the microphone is disable) 2.Press Mute key to enable the microphone

RMIT University ITS Training 11 Redial 1.Press the Line key twice or 2. Lift handset and press Line key once

RMIT University ITS Training 12 Toggle - 2 nd line key The 2 nd Line key is used when you are on the phone and you want to make another call. 1.Press the 2 nd Line key to make another call while the other person on hold

RMIT University ITS Training 13 Transfer a call 1.Press the Trans soft key, while connected to the called 2.Dial the number 3.Announce the call 4.Then press Trans soft key again to complete the transfer

RMIT University ITS Training 14 Volume control 1. Press volume+ key to increase volume when the handset is ringing 2. Press volume- key to decrease volume when handset is ringing Volume control handset/handsfree 3. Press volume+ key to increase volume when the handset is off the hook 4. Press volume- key to decrease volume when the handset is off the hook

RMIT University ITS Training 15 Call forward 1.Press Forward soft key 2.Dial internal extension (50852 to forward to voic ) 3.Press Forward soft key to confirm setting 4.Press Forward soft key to cancel.

RMIT University ITS Training 16 Personal directory 1.Press Directory key (stores 100 entries) 2.Use Navigation keys to highlight Personal Directory 3.Press Select or Enter.

RMIT University ITS Training 17 Voic Logging into voic from your extension 1.Press Line key 2.Press Msg-Inbox key or dial the internal voic access number Enter your password and Press # key Note: Default password is 12 + Extension

RMIT University ITS Training 18 Voic Logging into voic from any extension 1.Press Line key 2.Press Msg-Inbox key 3.Enter your mailbox number (extension number) 4.Press # key 5.Enter password 6.Press # key

RMIT University ITS Training 19 Voic Logging into voic from an external telephone 1.Dial the external voic access number Enter mailbox number (extension number) 3.Press # key 4.Enter password 5.Press # key

RMIT University ITS Training 20 Further training What can you do to make your job easier? Take advantage of the many FREE training courses available to you! –Blackboard –PeopleSoft –SAP –Excel –SkillPort –Groupwise And lots more! Go to our web site to learn more: