DECT ARIA IP - 60 Anton Hattingh
Overview Hardware DECT Configuration DECT Registration DECT Registration Attendant DECT registration PC Admin CONTENT
OVER VIEW WDIB4 Board should be installed instead of E1HB8
Hardware GDC 400B GDC 600B GDC 400H WDIB 4 ARIA IP - 60 GDC 450H
DECT Configuration A WDIB4 (4WTI + 4DKT I/F)/System Max. 4 Cells/System Max. simultaneous 4/6 Calls/Cell Max. simultaneous 16 Calls/System Supports DECT GAP standards Max. Base station distance from WDIB4 : 600m E1 Interface between WDIB4 and base station ARIA IP m 4 Calls per Base GDC 400/450H Max 16 DECT Handsets WDIB4 GDC 400/600 B NOTE: The WDIB4 can only be used on the BKSU
DECT Registration There is two ways to register a DECT handset to the ARIA IP - 60 system: DECT registration via PC Admin DECT registration via Attendant Terminal NOTE: The Park number and AC code can only be programmed into the system thru the Attendant terminal.
DECT Registration Attendant 1/2 Park code and AC code programming 1.Press TRANS/PGM 0 / # 2.Press Flex button 6 Park code programme 3.Type in Park code (Park code will be displayed on the MBU of BKSU) 4.Press hold/Save to save Park code 5.Press Flex button 3 AC code programming 6.This can be any code (1234) 7.Press hold/Save to save AC code 8.Press Flex button 1 Enter STA No: Enter Phone type (GDC 400/GDC 450) type 3 10.Press the Hold/Save button to start DECT registration. NOTE: Type 1: DECT handsets (33X) GDC 335H Type 2: DECT handsets (ST-GAP) any Standard GAP complaint handset Type 3: DECT handset (34x/4xx) GDC 345H and GDC 400/450 H
DECT Registration Attendant 2/2 DECT handset registration 1.Press the Menu Button on the GDC 450H handset 2.With the Navigational keys scroll to your right until Phone Registration 3.Press OK 4.Scroll down to Subscription 5.Press OK 6.Select Base 1 7.Handset will Display the Park number of System 8.Press OK 9.Enter AC code Press OK 11.On the Attendant Terminal it will show Subscribed: SUCCESS 12.And the GDC 450H Handset will confirm subscription.
1.Open PC Admin 2.Select Supplementary services 3.Select subscribe DECT Registration PC Admin 1/2
4.Type in STA no: Select Type of Handset 6.Press Execute 7.Follow All steps of DECT handset registration DECT Registration PC Admin 2/2