Modular Capacity - Test - System CS - 3001

Modular test system Easy to operate   Expandable up to 4 strings with 192 voltage inputs Block voltage : ± 16,6 VDC, (detection of voltage reversals) 600VDC CAT III (5000VAC test voltage) Parallel test of up to 4 batteries

Connection area

Connection example Standard 4mm safety connection

Bus area

Daisy chain connection Bus connection Daisy chain connection Power supply and communication in a single cable Standard RJ45 cable Each string of modules can have a total connection length of > 100m

Connection example of a 24VDC battery Bluetooth communication

Testing of an UPS ( 2 racks with 5 x 4 x 12V-Block) For ease of contact, not all input channels of a module must be used. Only the blocks on one level of a cabinet need to be connected

Maximum installation 1 2 31 32 String 1 String 2 String 3 String 4 RJ 45 CS-3001 Module CS-3001 Module CS-3001 Module CS-3001 Module String 1 DC IN RJ 45 CS-3001 Module CS-3001 Module CS-3001 Module CS-3001 Module String 2 RJ 45 CS-3001 Module CS-3001 Module CS-3001 Module CS-3001 Module String 3 DC IN RJ 45 CS-3001 Module CS-3001 Module CS-3001 Module CS-3001 Module String 4 CS-3001/PU 4 x 192 x 2V-Block

Resistance between any input > 2 MΩ (leakage < 0,3 mA) Safety aspects Resistance between any input > 2 MΩ (leakage < 0,3 mA) 5000 VAC Isolation The system uses no fragile mechanical relays for scanning the block voltages. Semiconductor switches for voltage selection has been eliminated. Defect switches can cause an electric shock, if no protection gloves are used.

Capacity Test

Capacity Test

Capacity Test

Capacity Test

Capacity Test