Intro to Sangoma Webinar Konrad Hammel Field Applications Engineer

Who is Sangoma Sangoma’s AFT Series Sangoma Cards A to B Intro to Asterisk Architecture Installing/Configuring Sangoma Cards Asterisk Distros Sangoma Cheat Sheet Q&A (please save all questions for this period) Outline 2Intro To Sangoma Technologies

Founded in 1984 by David Mandelstam (CEO) Located in Markham (Greater Toronto Area), Ontario, Canada and Montreal, Quebec, Canada Linux based routing in early/mid 90s Asterisk started out on a Sangoma Frame Relay card…but the project needed quality interface cards Design and build, telco grade, telephony interface cards Develop software to integrate the cards with your IVR, PBX or router Who is Sangoma? Intro To Sangoma Technologies3

SANGOMA’S AFT SERIES Intro To Sangoma Technologies4

Modularity, Inheritance, Abstraction: –Split the host interface, telephone interface, and DSPs Common PCI and PCIe interface for all cards –All cards use one core driver to interface with PC Telephony interfaces are designed to scale Expensive DSP modules are optional but don’t require different host or telephony interfaces AFT Series 5Intro To Sangoma Technologies

AFT Series 6Intro To Sangoma Technologies

AFT Series 7Intro To Sangoma Technologies

AFT Series 8Intro To Sangoma Technologies Does this design cost more then Dedicated designs….YES –Extra circuit boards –Extra connectors –Extra pieces –Intelligent assembly required –FPGAs need security

AFT Series 9Intro To Sangoma Technologies BUT… –Lower support costs One PCI or PCIe interface for 30+ cards Modularity makes troubleshooting easier –Lower maintenance costs If 1 section breaks, the other sections are re- usable –Lower cost of stocking cards Shared circuit boards = more boards per manufacturing run

AFT Series Octasic –We were first to use their technology –Telco grade echo cancellers –128ms tail…anything more and you are having a conversation with your echo –Fully Independent…no playing around, it just works. –Fax/Modem Detection –DTMF Detection and Generation Intro To Sangoma Technologies10

AFT Series Remora Expansion System –Simple method to have more ports without using more PCI/PCIe slots –Remora Daughter cards –2,3,4, and 6 port back planes –Lowest numbered connector in the back plane is port 1 Intro To Sangoma Technologies11

Field Upgradable Firmware –New features can be added in the field –No ones perfect…fixes bugs too Crash Proof Firmware –Primary and Backup firmware –Select via only jumper on card Insert Jumper, start computer, flash firmware, remove jumper, restart computer…you just saved a “bricked” card AFT Series 12Intro To Sangoma Technologies

AFT Series Clock Sync – Synchronise the clock from another card – Essential for Faxing…finally, reliable faxing – Uses the only jumpers on cards – Requires only a cable to connect the 2 or more cards Intro To Sangoma Technologies13

SANGOMA HARDWARE PRODUCTS Intro To Sangoma Technologies14

A port Analog Card PCI 2.2(5V and 3.3V) and PCIe(E) 2U Form Factor, 140mm x 55mm Uses standard FXO/FXS modules 4 x RJ11 (4P4C) Expands up to 24 via Remora System Optional hardware Echo canceller (D) Fax Sync Compatible Requires external power source for FXS and Remora Daughter cards Lifetime Warranty Intro To Sangoma Technologies15

A port Analog Card PCI 2.2(5V and 3.3V) and PCIe(E) Uses standard FXO/FXS modules Standard DB-25 connector Expands up to 24 via Remora System Optional hardware Echo canceller (D) Fax Sync Compatible Requires external power source for FXS and Remora Daughter cards Lifetime Warranty Intro To Sangoma Technologies16

Analog Modules FXS Module Used to connect phones, fax machines, modems, etc Adds 2 lines per module Green…easy to identify Universal interface, works with all Sangoma analog cards FXO Module Used to connect to telco lines Adds 2 lines per module Red…easy to identify Universal interface, works with all Sangoma analog cards Intro To Sangoma Technologies17

B600 4 port FXO + 1 port FXS PCI 2.2(5V and 3.3V) and PCIe(E) 2U Form Factor, 140mm x 55mm Standard RJ14 (6P4C), FXO has 2 lines per port No external Power needed Optional hardware Echo canceller (D) 5 year Warranty Intro To Sangoma Technologies18

A10X Series (A101, A102, A104, A108) 1-8 port T1/E1/J1 Channelized for data, voice or both Clock recovery (Normal) or Clock generation (Master) with Clock Reference PCI 2.2(5V and 3.3V) and PCIe(E) 2U Form Factor, 140mm x 55mm Standard RJ-48c connector Optional hardware EC (D) Up to 248 channels of hardware HDLC framing Fax source compatible Lifetime Warranty Intro To Sangoma Technologies19

A port BRI Card Expands up to 24 via Remora System PCI 2.2(5V and 3.3V) and PCIe(E) 2U Form Factor, 187mm x 55mm 2 BRI lines per RJ-45 port Capable of powering phones over line using standard power supply Requires power for Remora Daughter cards Optional hardware Echo canceller (D) Fax Sync and Source Compatible Lifetime Warranty Dip switches control termination resistance for BRI lines Intro To Sangoma Technologies20

B700 4 ports of BRI and 2 ports of FXO/FXS BRI modules are reversible TE mode one side NT mode on the other side Standard analog modules PCI 2.2(5V and 3.3V) and PCIe(E) 2U Form Factor, 187mm x 55mm 2 BRI lines per RJ-45 port, 1 RJ-11 (6P4C) for analog External power needed for FXS Optional hardware Echo canceller (D) Fax Sync and Source Compatible, but analog ports synced to BRI automatically 5 year Warranty Intro To Sangoma Technologies21 Dip switches control termination resistance for BRI lines

BRI Modules BRI lines have a Network side (NT) and a Termination side (TE) 1 module can do both, just flip it over Red = TE mode Green = NT mode Allows for the connection of 2 BRI lines Universal design works with all Sangoma BRI cards Intro To Sangoma Technologies22

UT-100 USB-FXO 2 port analog USB 1.0 interface Standard RJ11 6P4C Software EC and hardware EC 5 year Warranty Intro To Sangoma Technologies23

UT-50 Voicetime Dahdi Timing Device USB connector or 0.1” pitch connector 5 year Warranty Intro To Sangoma Technologies24

INTRO TO ASTERISK ARCHITECTURE Intro To Sangoma Technologies25

Asterisk Architecture 26Intro To Asterisk Architecture

Asterisk Architecture A Basic Call –call goes from TDM hardware, through the drivers, abstraction API, and chan_zapata to Asterisk –Asterisk then routes the call to the dial plan where Asterisk is told which Application to use –Asterisk uses the Dial application to setup another channel using chan_sip. –Chan_sip then sends the call to a SIP phone Intro To Asterisk Architecture27

INSTALLING AND CONFIGURING A SANGOMA CARD Intro To Sangoma Technologies28

Install the card into your system Install Dahdi, signalling stack (LibPRI) and then Asterisk Download the latest “feature frozen” driver –ftp://ftp.sangoma.com/linux/current_wanpipe/current-stable.tgzftp://ftp.sangoma.com/linux/current_wanpipe/current-stable.tgz Start the installer script “Setup” –“./Setup install” Configure the card using “wancfg_dahdi” Installing and Configuring 29Intro To Sangoma Technologies

Installing an A200 – dfhttp://wiki.sangoma.com/files/HardwareInstallationManuals/A200_Manual_Web.p df Installing an A400 – 2.pdfhttp://wiki.sangoma.com/files/HardwareInstallationManuals/A400_Manual_Web_r 2.pdf Installing an A500 – dfhttp://wiki.sangoma.com/files/HardwareInstallationManuals/A500_Manual_Web.p df Installing a B700 – dfhttp://wiki.sangoma.com/files/HardwareInstallationManuals/B700_Manual_Web.p df Installing Sangoma Cards 30Intro To Sangoma Technologies

ASTERISK DISTROS Intro To Sangoma Technologies31

Trixbox Community Edition –RPMs available Elastix –RPMs available PBX in a Flash –Source install Trixbox PRO / PBXtra –Supported by Fonality Asterisk Distros 32Intro To Sangoma Technologies

SANGOMA CHEAT SHEET Intro To Sangoma Technologies33

Sangoma Cheat Sheet Intro To Sangoma Technologies34

QUESTIONS? Intro To Sangoma Technologies35

THANK YOU. Konrad Hammel 36Intro To Sangoma Technologies