TMA-65 Workup Robin Lafever 30 April 20041 Detector geometry.

Slides:

Advertisements

Similar presentations

Electron detectors for HAPPEX2 and He Design Tests with high E electrons PMT tests Installation in HRS 4.

Advertisements

Rotation Solids In Contact.

RFQ Matcher. What am I doing this time?! Concerned that modulations and matcher affect field flatness and frequency These are very small features How.

LWIR FPA Mirror Image Problem & Recovery April 11, 2011 Roy W. Esplin Dave McLain.

NGAO Calibration/Simulation Source T. Stalcup, M. Pollard.

Ceramic Focal Plane Components For SNAP B. C

ICE CUBE Shake test Mounting fixture workups Proposed test set up –06 Robin Lafever 03 June

Waves on a spherical refracting surface. Suppose that light is incident parallel to the optic axis.

The Research School of Astronomy and Astrophysics of the Australian National University at Mt Stromlo Observatory is developing a wide-field Cassegrain.

Upgrading the ATA Feed Jack Welch and Matt Fleming.

NGAO Alignment Plan See KAON 719 P. Wizinowich. 2 Introduction KAON 719 is intended to define & describe the alignments that will need to be performed.

NGAO NGS WFS design review Caltech Optical Observatories 31 st March 2010.

Properties of Lenses Dr. Kenneth Hoffman. Focal Length The distance from the optical center of a lens to the film plane (imaging chip) when the lens is.

Integration and Test 14 October 2008 Martin Nordby.

The Coordinate Plane coordinate plane In coordinate Geometry, grid paper is used to locate points. The plane of the grid is called the coordinate plane.

SPS ITRT April Computation/ Estimation Number & Number Sense Measurement/ Geometry Probability/ Statistics Patterns, Functions, & Algebra

Berkeley workshop summary Redundancy : dual detector Field of view : 3”x6” Spectrograph length goal: < 400 mm Isostatic mount on the base plate with control.

2 D shapes only have two dimensions, such as width and length Some are: Polygons and Some are: Not Polygons.

Dennis C. Evans p1 SuperNova/Acceleration Probe 16 November 2001 Optical Analysis & Stray Light Evaluation Optical Analysis and Stray Light Evaluation.

PACS IHDR 12/13 Nov 2003 PACS FPU Optics: Concept and Alignment R. Graue, D. Kampf Kayser-Threde.

9/13/2015Robin Lafever BigBoss1. Fiber and Ferrule 9/13/2015Robin Lafever BigBoss2 Typical fiber and Ferrule: My current model is out of date. Jerry Edelstein.

The Field Camera Unit Project definition, organization, planning S. Scuderi INAF – Catania.

DesignWorks Berkeley Lamp LightFair Exhibit April 10, 2001 Display Booth workup Requirement, goals and constraints for LightFair 2001 The essential requirements,

I. Introduction Objectives  To solve geometric problem(misalignment) in cone-beam computed tomography (CBCT) system.  To adjust X-ray focal spot using.

Integral Field Spectrograph Eric PRIETO CNRS,INSU,France,Project Manager 11 November 2003.

SNAP Integration Model V. S14 The SNAP Integration Model Mechanical [ SC4 Breakout ] Robin Lafever LBNL Engineering.

Notes from Apr 21 Whiteboard session 1 Robin Lafever Thursday afternoon, 21 Apr We convened around a Whiteboard to try to integrate the spectrum of ideas.

LPROT Experiment TE/MPE/PE EN/STI EN/MME. Objectives Create the conditions to produce hydrodynamic tunneling. Benchmarking FLUKA-BIG2 simulations. Assert.

Opto-Mechanics for SNAP at UM

Primary mirror Secondary mirror Spectroscopy focal plane Imager focal plane Beamsplitter Fully articulated solar panels and antenna Tertiary mirror Prism.

Types of Metal.

Robin Lafever1 JDEM Focal Plane Assembly Full-scale Mock up and Cold Plate Engineering model Prepared for Michael Levi and Henry Heetderks JDEM.

M-21 Mockup Fold-Flat Mirror Assembly M21-B-2 Robin Lafever LBNL 1 Fabrication and assembly notes.

SEVIRI Scan Mirror M. Lampton UCB SSL Oct SEVIRI Spinning Enhanced Visible IR Imager Main instrument aboard MSG-1 (Meteosat Second Generation) Zerodur.

Delta II 7925H - 10L Baseline workup Launch Vehicle TheirsOurs Delta II 7925H Launch Vehicle 10L Composite Fairing 10L Stretch Composite Payload Fairing.

Improved Annular-Field Three-Mirror Anastigmat? M.Lampton UCB SSL Previous AFTMAs have pri-sec separation 2.4m Can pri-sec separation be reduced? –Support.

S-17 Reference Model Status Robin Lafever 21 October 2004.

1 Shield and Fold Mirror Dimensions Michael Sholl 3 February 2005 MODIFIED by Robin Lafever 23 Feb 2005.

Dimensioning the focal plane (RSC centric version) C. Bebek 9 July 2003 Revised 14 July 2003.

Typical PSA cabinet used in these layouts is based on a Type A, Series 400 Stainless Steel unit from Terra Universal. Catalog cut is shown below. CAD Models.

Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

As-built 09 April 2008 Cuore concrete support structure with jack screws in place Cuore site with elevator deck ready for installation 1 Robin Lafever.

ISWG - December 7, Destiny, The Dark Energy Space Telescope.

Chapter 2: The Lens. Focal Length is the distance between the center of a lens and the film plane when focused at infinity.

3:00. 2:59 2:58 2:57 2:56 2:55 2:54 2:53 2:52.

Spectrograph focal plane 2003 Goals : CCD l Improved CCD Cryostat connections, decoupling, preamp box photodiodes for efficiency monitoring thermistances.

SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 CCD Aluminum Nitride Invar frame CRIC, Clocks Molybdenum frame CCD.

WFIRST Large-cell structure concept design Preview Work in progress 3/4/2016Robin Lafever1.

The Field Camera Unit Results from technical meeting S. Scuderi INAF – Catania.

STC "VOSKHOD", PROJECT "SPECTR-UV", JUNE 2006 Next slide Next slide Previous slide Possible layouts of Field Cameras.

ZTF Filter Options P. Jelinsky ZTF Technical Meeting 1.

PSA Layout studies-2 6/12/2016Robin Lafever LBNL1 In mid April 2008, a series of studies was conducted to attempt to accommodate the desire to place the.

The reading is 7.38 mm. The reading is 7.72 mm.

Today we will be learning: to recognise and use patterns in subtraction to use patterns to solve further problems.

Scott Wakely University of Vengeance

DES Blanco602 Opto-Mechanics

TEMPERATURE SENSOR LOCATIONS

Top Fire Protection Services Ottawa available on Dubinskyconstruction

Henry Heetderks Space Sciences Laboratory, UCB

Mometta III eTwinning project: On the Track of Our Recent Past

SLAC DOE Program Review

Space Frame Telescope Structures for SNAP: Part II

X-Y Planar Precision Scanner

Molecular Imaging System

Another Modular Focal Plane: Part 2 – FP assembly

Auxiliary Projection Solids In Contact.

Rotation Solids In Contact.

Types of Metal.

Standardized CCD and MCT detector mounting configurations

Practice Geometry Practice

Presentation transcript:

TMA-65 Workup Robin Lafever 30 April Detector geometry

TMA-65 Workup Robin Lafever 30 April Focal Plane Layout 44mm grid

TMA-65 Workup Robin Lafever 30 April Coldplate 44 mm grid superimposed on grid

TMA-65 Workup Robin Lafever 30 April Cold Stop and ‘Mailbox’ Calibration flat assembly

TMA-65 Workup Robin Lafever 30 April “Mailbox” Calibration flap assembly

TMA-65 Workup Robin Lafever 30 April “Mailbox” Calibration flap assembly--Closed

TMA-65 Workup Robin Lafever 30 April “Mailbox” Calibration flap assembly

TMA-65 Workup Robin Lafever 30 April “Mailbox” Calibration flap assembly

TMA-65 Workup Robin Lafever 30 April “Mailbox” Calibration flap assembly

TMA-65 Workup Robin Lafever 30 April “Mailbox” Calibration flap assembly

TMA-65 Workup Robin Lafever 30 April “Mailbox” Calibration flap assembly--Open

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Square pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Cassegrain Shutter Assembly ’Diamond pattern’ focal plane orientation

TMA-65 Workup Robin Lafever 30 April Shutter Assembly and Optical Bench clearance

TMA-65 Workup Robin Lafever 30 April Shutter Assembly and Optical Bench clearance

TMA-65 Workup Robin Lafever 30 April ‘What If ‘ Shutters above the Cass focal Plane

TMA-65 Workup Robin Lafever 30 April ‘What If ‘ Shutters above the Cass focal Plane

TMA-65 Workup Robin Lafever 30 April ‘What If ‘ Shutters above the Cass focal Plane

TMA-65 Workup Robin Lafever 30 April ‘What If ‘ Shutters above the Cass focal Plane

TMA-65 Workup Robin Lafever 30 April ‘What If ‘ Shutters above the Cass focal Plane

TMA-65 Workup Robin Lafever 30 April ‘What If ‘ Shutters above the Cass focal Plane

TMA-65 Workup Robin Lafever 30 April TMA-63 Optical Bench assembly with TMA- 65 optics and shutter

TMA-65 Workup Robin Lafever 30 April TMA-63 Optical Bench assembly with TMA- 65 optics and shutter