EASY DISPOSAL SYSTEM* Developed by Peace Builders LLC 25 Welsh’s Beach Road Lexington Virginia Presented July 21, * Patent Pending # 62/061274

2

*** All parts shown in this presentation are for demonstration of design and will vary 3

4

After injecting bag w/ hot water : Replace cap & Emulsify solids… 5 Stir / Mix / Liquefy effluent

After emulsifying solids… Let spout flip from back to front when dumping 1 1.Hold spout flap Up w/out cap 2.Fold spout end forward & down 3.Lower “pinched” end into toilet 4.Let Flip Forward to deposit 5.Flush Immediately (!) (Repeat as necessary) 6 Hold tube end up w/out cap Fold Tube opening Forward & down 1 2 After liquefying effluent: 4 3

7 PLA Secondary Safety Clip Larger Pouch receives spout. (On Front ! ) Should be a ‘screw cap’ to allow its removal from effluent’s “dump” path… Manual Screw Cap Breathing/Stoma Treatment Port (*) “Realistic” solution for problematic pressure build-up… (*) (Hair Barrette style mechanism) (*) Also eliminates ‘unexpected’ embarrassing bodily release of gas… For quick effluent disposal … Port will allows direct medical care for stoma

8 Easy direct tube connection at the water heater.

9 Virtually “Closed” System!

Portable H2O supply tank for use at for use at bedsides * Open * Portable Irrigation System could also be used by those patients emptying ostomy bag to a toilet. by those patients emptying ostomy bag to a toilet. 10 Sealed Bag

Close Closed H2O Fill Port 11

H2O Fill Port 12 Open Virtually “Closed” System! Tube to Sealed Bag Sealed Bag

*** All parts shown in this presentation are for demonstration of the Peace Builders Easy Disposal System design concept and will vary... (Clear valves/lines would be preferable***) Open Closed Open All Rights Reserved 13

14 Manual Port for relieving gaseous build-up, irrigation, stoma inspection/treatment.

15 Bedridden Configuration Direct injection