Model “GT” Size Model “GT” Size

 20 Gauge aluminized steel tubes  Single orifice (Size ) or multiple orifice (Size ) inshot burner  Tubes expanded into vestibule, no welding  Heat exchanger expands and contracts evenly which aids in heat exchanger life expectancy

 ETL certified for residential garage installations  Sizes ranging from 30 to 120 MBH  Low profile design ideal for low clearance installations  Over 82% thermal efficiency  20 gauge jacket panels with baked enamel finish  Individual removable self locking louver blades  Left hand access standard, field convertible to Right hand access by flipping the unit over and remounting the hanging brackets

 Heavy duty OSHA fan guard  115V Propeller motor wiring enclosed in flexible conduit  Power venter assembly exits through rear of the unit  Open drip proof motor standard  Optional totally enclosed motor  Field convertible to separated combustion

 ETL certified for commercial & industrial applications  Sizes from 150 to 400 MBH  83% Thermal efficiency  20 Gauge jacket panels with baked enamel finish  Individual removable self locking louver blades  Interior baffles aid in heat transfer and increase outlet velocity for increased throw delivery

 Construction of inshot rack securely holds burners on their centerline so they do not impinge on tube interior surface, a potential cause of premature heat exchanger failure  Attaches directly to the bottom of the tubular heat exchanger assembly  20 Gauge tubes expanded into the vestibule, no welding  Heat exchanger expands and contracts evenly which aids in heat exchanger life expectancy

 Isolated control panel  Same propeller fans and motors utilized in the “GH” series units  Power venter assembly sized to the particular unit size  Direct spark ignition  Thermostat wires to an exterior terminal strip located under the control cabinet access door  Fan vent panel constructed of aluminized steel

30⁰ Nozzle60⁰ Nozzle 90⁰ Nozzle

Totally Enclosed (TE)  Open Drip Proof (ODP)