QS: Offline Register To register QS Offline Follow the steps below: 1- Download. 2- Install. 3- Register. Continue = Mouse Click Exit = Key

Use a connected computer to download QuikScripts from: The downloaded program must be stored on your hard drive or on a large media that can be read by your internet computer (online) and your work(QS) computer (offline). An example of such a media would be a Zip disk, USB memory stick, or CD (with a CD burner- common on most computers for the last two years). Take the media to your offline computer. 1- Download Continue = Mouse Click Exit = Key

Place the media in your offline computer. Run the QS setup from the media. The Setup screens will guide you through the setup process. 2- Install Continue = Mouse Click Exit = Key

3- Register(1) Launch QS, the contact info screen will appear. Fill in the required info. Check the ‘register offline’ box. Press the ‘Purchase >’ button. Continue = Mouse Click Exit = Key

Register(2) The offline submission screen will appear. Place an empty floppy in your A: drive. Press the ‘Submit/DSK’ button. The QS will provide more instructions to follow. Continue = Mouse Click Exit = Key

Register(3) Take the floppy back to the connected computer Place the floppy in A: drive Run the ‘GetKey’ program from the floppy GetKey will guide you through the purchase process. Wait for minutes then run again GetKey to retrieve your key. If the key is retrieved you’ll be informed to take the floppy to the offline computer. Continue = Mouse Click Exit = Key

Register(4) Place the floppy in A: drive (offline computer). Run QS. The Retrieve screen will appear, press the ‘Retrieve’ button. QS will automatically retrieve the key. The end. Continue = Mouse Click Exit = Key