Janie Harris, Extension Specialist Housing and Environment
The lack of regulations covering water-saving Policies based on increasing the supply Ignorance of the existence of water-saving technology enabling more efficient use of water in the home Attitude of abundance
Limited and irregular rainfall Aquifer and reservoir levels are low Water restrictions on customers Conflict over valuable commodity Water is inexpensive to consumer Water is being misused Population continues to grow
Promote a water-saving consciousness Support changes that will achieve a reduction in water use Use a fast, inexpensive, contentious-free approach Shared responsibility among all
Many consumers have an awareness Most need an understanding of exactly what they individually can do to save Begin with information about how households use water Provide information and assistance with how they can reduce the amount of water they use
How a household uses its water Knowing how much water they use Knowing how much water costs $23.50 per month 0 – 3,000 gallons $ 2.65 per 1,000 gal. 3,001 – 10,000 gallons $ 2.80 per 1,000 gal. 10,001 – 20,000 gallons $ 3.30 per 1,000 gal. 20,001 – 40,000 gallons $ 4.30 per 1,000 gal. Above 40,000 gallons
Households used approximately146,000 gallons annually 42 percent (61,300 gallons) was used indoors 58 percent (84,700 gallons) was used outdoors Source: Residential End Uses of Water (Denver, Colo.: AWWARF, 1999). Source: Residential End Uses of Water (Denver, Colo.: AWWARF, 1999).Residential End Uses of WaterResidential End Uses of Water
Toilets used the most water on a daily basis (20.1 gallons per person per day) Clothes washers were the second largest water users (15 gallons per person per day) Showers were third (13.3 gallons per person day) Source: Residential End Uses of Water (Denver, Colo.: AWWARF, 1999). Residential End Uses of WaterResidential End Uses of Water
Clothes washers are top water user (15 gallons per capita per day) Faucets (10.9 gallons per capita per day) Showers (10 gallons per capita per day) Toilets (9.6 gallons per capita per day). Source: Residential End Uses of Water (Denver, Colo.: AWWARF, 1999). Residential End Uses of WaterResidential End Uses of Water
Passed by congress in 1992 Water-efficiency standards: ◦ Showerheads: 2.5 gallons per minute ◦ Faucets: 2.5 gallons per minute ◦ Toilets: 1.6 gallons per flush Only affects new construction and replacement fixtures
Changing water-consumption habits Installation of water-saving devices in old equipment Acquisition of new water-saving equipment Acquisition of water-saving household appliances Other measures, device or equipment designed to save water (repairing leaks, recycling of household liquid waste, rainwater collection, etc.)
Families can reduce water use by 25-35% Fix leaks by replacing faucet washers and toilet flappers as needed Replace showerheads and faucet aerators with water-efficient models Install water-efficient toilets (1.6 gal)
Provide educational information, list of recommended behavior changes, home water audit, list of recommended fixture changes, install water efficient fixtures (toilets, shower heads, aerators) Outcome – dollars saved and water saved Outcome – which level of intervention was most effective
Household A – provide educational information and a list of recommended behavior changes in order to reduce water usage Household B – provide educational information, conduct home water audit, give list of recommended behavior and fixture changes Household C – provide educational information, conduct home water audit, give list of recommended behavior changes, change toilets to 1.6 gal flush toilet, change shower heads to 2.5 gal/min. models, add aerators to each sink
Motivated households with education on how to change water use behaviors reduced water consumption the most. Household where the toilets, aerators and showerheads, were retrofitted, along with education, showed the least savings in water consumption. Focus on “Public Education Campaign” – include in-house conservation as well as drought-tolerant landscape
Shower heads ◦ Current standard 2.5 gal/min ◦ Fixtures in 1970’s = 10 gal/min ◦ > 30 different high-efficiency showerheads ◦ Throttling valves allow consumer to turn down the flow while soaping, shampooing hair, shaving, etc.
Faucets ◦ Current standard 2.5 gal./min ◦ Throttle or tap saver ◦ Pedal control faucet ◦ Sensor ◦ Simply turn off the tap ◦ Aerators on all faucets
Toilets ◦ Current 1.6 gal/flush (w/without pressure assist) ◦ Dual flush ◦ Prior to 1980, 5 – 7 gal/flush ◦ 1980 – 1992, 3.5 gal/flush ◦ Water displacement in tank
Washing machines ◦ Not subject to national water-efficiency standards in the United States ◦ ENERGY STAR qualified clothes washers save water and energy ◦ 18 to 25 gal vs. 32 to 59 gal. per wash ◦ Reduce wash water needs by 30 – 60%
Dishwashers ◦ ENERGY STAR qualified dishwashers use an average of 44% less water than conventional models ◦ Avoid using rinse-hold and pre-rinse features ◦ Always wash a full load ◦ Automatic dishwasher uses approximately 9 15 gallons of water while hand washing dishes can use up to 20 gallons
An average home will waste approximately 10,000 gallons of water per year running it down the drain waiting for hot water
Tankless Point of use heater Shortest run possible 3.7 gal/min
The Metlund® Hot Water D'MAND® System (a high performance pump, integrated controller and electronic zone valve), requires no special plumbing. It is designed for use with any hot water heating system to provide energy and water savings. It's easy to install in new or existing homes or businesses.
At the push of a button, the Metlund® Hot Water D'MAND® System circulates the ambient temperature water in the hot water pipes (water that is normally lost down the drain) back to the water heaterbutton As the ambient temperature water in the cold water line travels towards the hot water heater, the D'MAND System fills the hot water line with hot water. When the hot water reaches the D'MAND System, a thermal sensor (thermistor) senses a temperature rise and quickly closes the zone valve while it shuts the pump off.
Graywater systems filter and recycle water from bathroom sinks, showers, and washing machines for irrigating landscaping and/or flushing toilets For a typical household, reusing graywater can provide fifty to one hundred gallons per day for outdoor use and toilet flushing, cutting your water and sewer bills noticeably Local regulations affect implementation
In-Home Water Management Efficient and Plant Selection for your landscape Rainwater Harvesting Energy Conservation
Promote a water-saving consciousness Support changes that will achieve a reduction in water use Use a fast, inexpensive, contentious-free approach Shared responsibility among all
Adopt a water conserving attitude Change behaviors to conserve water Install more water efficient equipment and appliances Reduce water use in landscape Capture, reuse, recycle water
Promote a water-saving consciousness Support changes that will achieve a reduction in water use Use a fast, inexpensive, contentious-free approach Shared responsibility among all
To do your part to help reach our goal of using less water per person per day in households without sacrificing comfort Make Every Drop Count