A Low Cost Approach to Interoperability and Digital Migration Comm-Tac A Low Cost Approach to Interoperability and Digital Migration

Comm-Tac Overview Comm-Tac is designed to meet a growing demand for a low-cost method of solving tactical interoperability problems It meets a challenging need for quick, immediate grouping of dissimilar radios

Comm-Tac Overview Provides tactical interoperability on demand or on a permanent, full time basis Provides radio grouping at the hardware level, inexpensively and effectively

Front Panel View Easy push button operation for assigning groups. Three position buttons set a radio to Group A, Group B, or Off.

UHF Transmits through the system to MOTOTRBO™ and vice-versa How it Works UHF Conventional MOTOTRBO™ MOTOTRBO™ System UHF System UHF Transmits through the system to MOTOTRBO™ and vice-versa UHF Conventional MOTOTRBO™

The Result is UHF Talking to MOTOTRBO™ effectively How it Works UHF Conventional MOTOTRBO™ MOTOTRBO™ System UHF System The Result is UHF Talking to MOTOTRBO™ effectively UHF Conventional MOTOTRBO™

Rear Panel View 4 individual DB-9 connectors for radio interface, fuse and power connector

Powering Comm-Tac Equipped with a locking connector plug for DC or AC power connections

Connecting Radios Radio resources are connected via radio termination cables purchased from Trident or made by the dealer

Connecting Radios UHF MOTOTRBO™ In the previous demo diagram, the UHF Radio is connected to Port 1 and the MOTOTRBO™ radio is connected to Port 2

4 Resource Capability UHF Conventional 800 MHX Smartnet Group A Group A MOTOTRBO™ VHF PassPort or LTR Group B Group B Connect up to 4 resources (radios) in any combination of 2 groups

4 Resource Capability Or group them all together. UHF Conventional 800 MHX Smartnet Group A Group A MOTOTRBO™ VHF PassPort or LTR Group A Group A Or group them all together.

LED Indications The above diagram shows radios 1 and 2 connected as Group A radios 3 and 4 connected as Group B

Making Groups Simply press the button until the desired grouping is reached. Press once for assigning to Group A. Press twice to assign it to Group B. Press a third time and that resource returns to normal mode (ungrouped).

More Examples Nexedge VHF Trunking UHF Conventional P25 800 MHz Nexedge, P25 and VHF Trunking are grouped together. UHF is not grouped with any other radio and is in normal mode.

Applications Can be used at system backbone level or customer level Comm-Tac can be used to map talk groups together that do not normally connect Connect Trunking to Conventional Platforms

Opportunities Public Safety, First Response Schools, Universities Public Places supporting many different radio users such as Sports Complexes Monitoring radio traffic not usually monitored

Vertical Markets Construction Companies Utility Companies Power Companies Chemical Plants Manufacturing Facilities Sensitive Environments

Common Uses UHF Conventional MOTOTRBO™ Neighboring Power Companies can assist each other during outages.

Common Uses UHF Conventional MOTOTRBO™ By using Comm-Tac, assisting power companies can now communicate with the other company when they arrive on scene.

Common Uses “First Response” agencies can group with utilities during disasters or on a regular basis

Common Uses Response to facilities where radio communications and coordination are critical, but usually not possible

Technical Overview Comm-Tac offers adjustments and “Tuning Pots” under the cover for set-up and alignment Not all situations will require adjustments, however, Trident recommends taking appropriate measurements to be sure the Comm-Tac is operating at optimal levels

Set up and Configuration Alignment, settings and instructions are illustrated in the Installation and Operation Manual

Internal View of Comm-Tac Dip Switches for set-up

Set-up and Configuration Alignments and adjustments such as: Squelch Settings COR VOX and sensitivity settings Audio Delay: Adjusted by internal dip switches to support trunking systems and channel acquisition time

Set Up and Configuration Audio Deviation can also be adjusted When combining 25 KHz radios with 12.5 KHz or narrow band radios, some alignment may be necessary to balance audio, etc.

Ordering Comm-Tac Dealers may order Comm-Tac direct from Trident Micro Systems Trident works through resellers and dealers and prefers not to sell direct to end users

How to Order Contact Trident Micro Systems Two Trident Dr., Arden, NC 28704 (800) 798-7881 *Follow prompts to Sales Fax Orders : (828) 684-7874 Email orders : sales@tridentms.com Contacts Keith Rhodes, National Sales Manager, Ext 1600 Mark Durner, Regional Sales Manager, Ext. 1621 Brian Roberts, Regional Sales Manager, Ext 1620 Angela Gryder, Inside Sales Coordinator, Ext 1601

Part Numbers to Order 710-015 Comm-Tac Kit Includes Comm-Tac Chassis, DC power cord, Vehicle Mounting Bracket and Installation and Operation Manual

Optional Accessories * Call Trident for a list of available cables 500-576 : Comm-Tac Power Cable Kit (Order this cable to plug into AC power source) * Call Trident for a list of available cables

Warranty and Technical Support Trident Provides a one (1) year parts and labor warranty for Comm-Tac . Trident's standard warranty policy applies and is available for telephone technical support if needed.

Technical Support Contact Contact Trident Micro Systems Two Trident Dr., Arden, NC 28704 (800) 798-7881, Ext 1300 (828) 684-0319 Support@tridentms.com Access through Trident’s website also offers emergency tech support requests at www.tridentms.com

Comm-Tac Recap Connect Dissimilar Trunking Platforms to Newer Digital Technologies Connect Conventional Platforms to MOTOTRBO™, Nexedge,P25 and more Extremely Easy to Use

iOPT Commander Coming Soon ! Can be used with all iOPT Products Allows the user to place himself into a group with other sources Features: Heavy duty microphone External speaker Headset jack Mute button

Coming Soon ! iOPT Commander Can be used as a single transmit point. Great for Immediate broadcasts to all connected sources Supports headset connections into popular intercom systems Manage connections on the fly

Coming Soon ! iOPT Commander

Coming Soon ! iOPT Commander

iOPT family of Products

Questions and Answers