Warship 2010 The Application of Integrated Computing Technology to the Design, Construction and Lifecycle Support of Warships The Royal Institution of Naval Architects 10 June, 2010

Above the surface: –The most productive ship design and building system built upon the proven capabilities of AVEVA PDMS and Tribon –Implemented world-wide –Technology providing new business opportunities Below the surface: –Powerful, proven Dabacon database –Parametric modelling –Open customisation –Not reliant on third-party software AVEVA Marine

AVEVA – The industries we serve Oil & Gas ChemicalPharma Pulp & Paper Marine Power Relevant software development shared between industries

AVEVA – Space Management Early creation of a Common Reference Model used for downstream design tasks – flexible; use 3D and/or schematic Spaces and zones within larger spaces and across spaces Knowledge-based e.g. automatic insulation added

Design-analysis integration Own and third-party hull form generation and hydrostatic analysis Interfaces to Classification Societies, FEA (ANSYS) and CFD

Single point of entry into ship’s database: for early I/D, estimating, ordering and for use in downstream processes Import diagrams, e.g. from suppliers, ISO15926 Product Model DB Schematic Data 3D Design Data Diagrams and Schematic Model Viewer

Supplier equipment Equipment downloaded directly from supplier site using AP 203 Automated geometry simplification Courtesy of Wärtsilä

Integrator Rule-based 3D arrangement created from 2D diagram, e.g. automatic pipe routing; flow balance, clash free, etc. Checking 2D against 3D and highlighting any differences

AVEVA Marine – Error free designing Clash detection and management Association Alignment of pipes Hole management

AVEVA Marine – Error free building Assembly Planning – Build Strategy Weld Planning & Robot Control Shrinkage; spring-back etc. Accurate BoM and many more....

Automated generation of drawings Automated drawings via customized templates Stage fabrication drawings and manufacturing drawing

REINERTSEN ENGINEERING Tronhiem REINERTSEN ENGINEERING Murmansk AKER KVAERNER Oslo VETCO AIBEL Billingsked STATOIL De-Militarized Zone DMZ HUB Behind firewall  Example of one project: – 1 hub with 4 satellite sites – 450 concurrent users  Statoil has in total: –30 hubs –40 satellites in their DMZ –117 sub-contractors –Approx. 1,000 users / day Global multi-site, concurrent working

 Capturing the current as-built condition for Re-fits, Conversions, Through-Life Support and Life Extension Laser scanning technology

Integration of laser data and AVEVA Marine  Re-designing in point cloud with clash detection and checking design within bubble views  Generating drawings and production data and reverse engineering

 Managed access to information between everyone inside and outside the shipyard  Automatic linking of Tags across all data sources  Red lining mark-up; commenting, automatic hot-spots  Vendor Neutral - Access all project information from ANY other systems  Drawings, diagrams and sketches  Material lists  Reports, manuals, certificates etc.  Planning information  Maintenance and operating data  Safety Training, much, much more... AVEVA NET  Integrate with ERP systems, e.g.

Calculations P&ID’s Linking and accessing of data and documents

Data capture and validation Gateway

AVEVA NET

Installation Status Report

AVEVA MARS Integration – A Closed-loop system