Place Measuring Tape at BOTTOM of Upper Rail and Measure Downward Towards the Bottom Rail HEIGHT MEASUREMENT (TOP)

Measure Height of Box From the Bottom of the Upper Rail to the TOP of the Bottom Rail (Measuring the Skin of the Box, This Measurement Is 90”) HEIGHT MEASUREMENT (BOTTOM)

Measure Length Starting at the Radius Panel Towards the Back of Box LENGTH MEASUREMENT (FRONT)

The Overall Length of the Box Ends at the Rear Vertical Post (601”)(Length of Skin of Box) LENGTH MEASUREMENT (REAR)

MVGS Unit Data Form Date: Carrier: Location: Unit #: Make of Body: Year of MFG: THE BODY SIDING IS ALUMINUM SMOOTH FRP (FIBER REINF PLYWOOD EXTERNAL POST CORRUGATED HORZ. CORRUGATED VERT. REFRIGERATOR REAR DOOR ROLL-UP DOOR YES NO SWING DOOR YES NO LIFTGATE YES NO LIFTGATE DECK ABOVE BELOW IS THE UNIT TRUCK TRAILER THE UNIT IS 14’ 16’ 18’ 20’ 22’ 24’ 26’ 28’ 40’ 45’ 48’ 53’ SIDE PANELS SIDE DOOR ON DRIVER SIDE YES NO SIDE DOOR ON PASSENGER SIDE YES NO SIDE DOOR USED BY CARRIER YES NO DOT REFLECTIVE TAPE YES NO HAZMAT PLACARDS YES NO IS THE UNIT A WEDGE YES NO W H SIDE PANEL FRONT HEIGHT: MEASURE FROM BOTTOM OF THE UPPER RAIL TO THE TOP OF THE BOTTOM RAIL. _________________________________________________ REAR HEIGHT: MEASURE FROM THE FRONT BOTTOM OF THE UPPER RAIL TO TOP OF THE BOTTOM RAIL. _________________________________________________ LENGTH: MEASURE FROM THE RADIUS PANEL SEAM TO THE FRONT OF THE REAR POST. _________________________________________________ W H REAR DOOR HEIGHT: TOP OF DOOR PANEL TO ABOVE OPEN HANDLE AT LOWEST POINT. ____________________________________________ WIDTH: DISTANCE BETWEEN CABLES. _____________________________________________ DOT TAPE REFLECTORS KEY SIDE DOOR ALL MEASUREMENTS MUST BE IN TOTAL INCHES FAX COMPLETED FORM TO