Liquidtight Fittings Crouse-Hinds Training Module

zApplications zTypes of Liquidtight Fittings zGeneral Product Features zSpecific Product Features: Liquidator, LiQuik, and Low Profile zCertifications and Compliances zOther Liquidtight Fittings zMarketing Materials Outline Liquidtight Fittings

Allows for a flexible conduit connection that protects from damage due to vibration and movement, and seals out contaminants such as water, dust, oil, etc. Used in the wiring of machine tools, motors, automation and control, panels, machining processes, wash down areas, classified (hazardous) locations, and OEM requirements. Industries such as food processing, paper mills, refineries, chemical plants, waste water facilities, injection molding plants, and other manufacturing facilities. Applications Liquidtight Fittings

Types of Liquidtight Fittings Liquidtight Fittings Liquidator Malleable Iron LT Liquidator Aluminum LT-SA LiQuik LiquidtightLTQ Low ProfileLTK

Liquidtight Fittings General Product Features Hex shaped for easy wrenching. Provides a fast, tight installation. Gland Nut Lock Nut Strong and reliable Teeth bite into box for reliable ground. Will not loosen from vibration. Aluminum or Malleable Iron Gland Nut Lock Nut

Liquidtight Fittings General Product Features Thermoplastic Elastomer construction. Sealing Gasket Effectively seals out water, oil, dust, and dirt. Ground Lug - Optional Lay-In Lug 360 degree swivel / rotation. Available in aluminum or copper. Sealing Gasket

Steel grounding ferrule is distortion free and reusable. Ferrule Liquidator TM Liquidtight Fittings Product Features Cupped lip and grooved shaft provide for excellent pullout strength. Ferrule

Polyethylene construction. Split allows sealing ring to be installed after installation of ferrule. Liquidator TM Liquidtight Fittings Product Features Grooves inside sealing ring indent into jacket of liquidtight and eliminate leakage. Reversible to ensure correct installation. Split Sealing Ring

Available in straight, 45 degree, and 90 degree. Fitting Body Liquidator TM Liquidtight Fittings Product Features Aluminum, and malleable iron bodies provide high strength and excellent corrosion resistance. Hex shaped for easy wrenching and fast installation. Available with optional insulated throat (malleable iron only). Aluminum or Malleable Iron Body

Malleable Iron or Aluminum construction. Straight, 45 degree, or 90 degree bodies. Insulated or Non-insulated. Aluminum or copper ground lug optional. Liquidator TM Liquidtight Fittings - Types Types

LT B SA GC Liquidtight Blank = Non-Ins. 38 = 3/8” Blank = Straight Blank = Steel G = Alum. Ground Lug B = Insulated 50 = 1/2” 45 = 45 Degrees SA = Aluminum GC = CU Ground Lug 75 = 3/4” 90 = 90 Degrees 100 = 1” 125 = 1-1/4” 150 = 1-1/2” 200 = 2” 250 = 2-1/2” 300 = 3” 350 = 3-1/2” 400 = 4” 500 = 5” 600 = 6” Liquidator TM Liquidtight Fittings Creating a Catalog Number

LiQuik TM Liquidtight Fittings The Latest, Innovative, Labor-Saving Product From Cooper Crouse-Hinds !

Steel grounding ferrule has unique protrusions that find and seat inside the body Ferrule LiQuik TM Liquidtight Fittings Product Features Cupped lip and grooved shaft provide for excellent pullout strength. Ferrule w/ protrusions

One piece Polyethylene construction. Beveled edges on sealing ring fit snuggly into the cup of the ferrule & beveled edge of the nut to eliminate leakage. LiQuik TM Liquidtight Fittings Product Features Sealing Ring

Available in straight in sizes 3/8 through 2” Fitting Body LiQuik TM Liquidtight Fittings Product Features Steel bodies provide high strength and excellent corrosion resistance. Hex shaped for easy wrenching and fast installation. Available with optional insulated throat Steel Body

Old Way Cost Comparison LiQuik TM Liquidtight Fittings New Way!

Labor savings Approximately $ 3.00 per installation* Price comparison 25% higher than old, fashioned tradition fitting at published distributor net slightly higher material cost - significantly lower total installed cost! *based upon average labor rate of $60/hr & 3 minute per fitting installation labor savings Cost Comparison LiQuik TM Liquidtight Fittings

LTQ B 75 Liquidtight Blank = Non-Ins 38 = 3/8” Quick (NO B = Insulated 50 = 1/2” Disassembly 75 = 3/4” Required) 100 = 1” 125 = 1-1/4” 150 = 1-1/2” 200 = 2” LiQuik TM Liquidtight Fittings Simple, Straight Forward Catalog Numbers

Low Profile Liquidtight fittings are designed specifically for applications that require close side-by-side mounting of multiple liquidtight fittings in tight spaces Low Profile Liquidtight Fittings Available in straight, 45 degree, and 90 degree.

LTK B Low Profile Blank = Non-Ins.38 = 3/8” Blank = Straight B = Insulated 50 = 1/2” 45 = 45 Degrees 75 = 3/4” 90 = 90 Degrees 100 = 1” 25 = 1-1/4” 150 = 1-1/2” 200 = 2” Low Profile Liquidtight Fittings Creating a Catalog Number

UL Standards: 514B, 467 CSA Standard: C22.2 No. 18 NEC: –Class I, Division 2 –Class II, Divisions 1 and 2 –Class III, Divisions 1 and 2 Certifications and Compliances Liquidtight Fittings

zLiquidtight to Rigid / IMC Coupling - LTR Series. –3/8” - 2” zLiquidtight to Rigid / IMC Coupling with AL Ground Lug - LTR Series. –3/8” - 2” Lug Size #4 - #14 zSteel Ring Self Retaining PVC Gasket - SG Series. –3/8” - 6” zLiquidtight Wire Mesh Grip - WMG Series. –3/8” - 2” Other Liquidtight Fittings

Liquidtight Fittings - Marketing Materials zCommercial Products Catalog zCross Reference Guide zFittings Pocket Guide zLiquidtight Fittings Product Brochure zwww.crouse-hinds.com