BRX210 ‘Mechanical Blueprint Reading’ Unit #5 Working Drawings

After studying this unit, you will be able to: Interpret a one-view drawing Interpret a two-view drawing Interpret a simple three-view drawing

Answers to Rear Bracket Quiz 2 7.0 mm Metric (mm) 114.0 mm M1033 4.8 mm 7.8 mm 96.2 mm was 56.0 mm 96.2 mm Long ± 0.25 mm 40.0 mm 114.8 mm 5 R added diameter

Answers to Gasket Quiz 0.034 in. 1.94 in. 1.75 in. 0.385 in R 0.44, R 0.66, R 0.78 R.L. Must be uniform within given limits 0.88 in. 6510-199, 6510-232 ±0.0005 in. Full Pump to Cylinder Block Full 0.022 – 0.016 in. AN-894

Answers to Blade Clamp Quiz 0.312/0.304 x 0.275/0.267 9/16 in. 19/32 in. ± 0.010 Ø 0.142/0.138 cast hole 0.154 in. 0.142 in. 0.189/0.198 4:1 Investment Casting 0.317 in. 0.035/0.042 8620 Steel Hidden 0.038/0.052 No 0.304/0.312 Yes 0.5725 in. Rectangular

Answers to Threaded Shaft-Pulley Puller Quiz ± 0.015 in 0.06 in. NTS (Not to Scale) 3.495 in. 0.03 in. 0.063 in. 0.750 in 0.550 in. 0.13 in. 2.057 in. 0.330 in. 0.586 in. 8-23 8-14 Statistical Process Control 3 ± 0.060 in. 2.250 in. The entire part Rev E