NANOTECHNOLOGY. Today’s Global Water Crisis has created an urgent need for THASMS AQ3 water units!

Slides:



Advertisements
Similar presentations
High performance; from 1 metric ton to 100 metric tons instant purification facility per hour, 2400tons per day Low energy consumption (25 kw/h – 38 kw/h)
Advertisements

NANOTECHNOLOGY. Todays Global Water Crisis has created an urgent need for THSMS AQ3 water units!
Common Water Treatment Problems Hard Water -Calcium and Magnesium. Soap Scum, and Scale Build-Up. Iron - Clear (Ferrous), Red (Ferric), & Bacteria Related.
{ Understanding Drinking Water Contamination Abigail F. Cantor, P.E., Chemical Engineer Process Research Solutions, LLC Madison, WI.
Actual groups of customers The determination of heavy metals related to monitoring of the environment has gained increasing interest. Our new method enables.
Water for Pharmaceutical Use Introduction and treatment Md. Saifuzzaman Associate Professor Pharmacy Discipline, KU. Pharmaceutical.
Hydrosphere The hydrosphere is a combination of all kinds of free water on the Earth. From Greek: ὕ δωρ - hydōr, "water" σφα ῖ ρα - sphaira, "sphere"
DETERIORATION OF DRINKING WATER QUALITY & NEED FOR BETTER QUALITY POU WATER PURIFIERS.
Unintended Pesticide Impacts Drinking water, soil, aquatic organisms, birds, bees, fish, beneficial insects, biodiversity.
Regulatory Update Now and Beyond Overview CCL3 Drinking Water Strategy Six year Review Perchlorate Lead and Copper Revisions TCR.
Water Contamination and Human Health. Water Contamination Contamination is caused by pollution from foreign matter such as microorganisms, chemicals,
Chapter 21 Water Pollution
Assessing Aquatic Ecosystems & Measurement. Aquatic Ecosystem Assessment The health of an aquatic ecosystem can be determined by examining a variety of.
Common drinking water contaminants * chlorine * fluorine * lead (often from old plumbing with lead pipes and solder; old drinking fountains are notorious)
B-6.6: Explain how human activities (including population growth, technology, and consumption of resources) affect the physical and chemical cycles and.
WATER CONTAMINATION AND HUMAN HEALTH Pam Stewart Biomedical Innovations Central Magnet School.
Saving water and energy in vinification What are the technique to save water and energy in the production of wine? And how much do you save? MARCO RUFFINI.
Water Usage Water Contamination. Office of Wastewater Management, U.S. EPA Progress in water quality: An evaluation of the national investment.
Treating Drinking Water Treatment Plant Water Distribution.
Human Impact on the Environment Minerals in Water.
DIVISION OF APPLIED TECHNOLOGIES NCSR “DEMOKRITOS” Innovative hybrid desalination unit for potable water production with simultaneous removal of harmful.
Water Pollution. Types of Pollutants Microorganisms Cryptosporidium Giardia Fecal coliform bacteria.
Water Conditioning Process
Identifying Water Sources and Quality Standards. Next Generation Science / Common Core Standards Addressed! WHST.9 ‐ 12.7 Conduct short as well as more.
Water Pollution Chapter 22 Lara, Nanor, Natalie, Sosi, Greg.
Water Pollution. How does a flood relate to an aquifer? A flood occurs when an aquifer is completely saturated and water cannot move downward POTABLE:
William V. Collentro ULTRAPURE WATER Pharma 2010 New Brunswick, New Jersey May 20-21, 2010.
Water Pollution Chapter 22. Types of Water Pollution Sewage ↑ Enrichment Explosion in algal, bacteria, & decomposer populations ↑ Biological oxygen demand.
Contaminated Soil Monitoring Pornsri Suthanaruk, Ph.D Pollution Control Department (PCD) Ministry of Natural Resources and Environment Thailand Workshop.
Definition, sources and causes
Chapter 22 Water Pollution. Types of Water Pollution  Water pollution  Any physical or chemical change in water that adversely affects the health of.
(E6) Water Treatment Sarah Black.
Water Treatment: Introduction Suzette R. Burckhard, PhD, PE Civil and Environmental Engineering South Dakota State University Engineering the Future 2014.
Drinking Water Quality and Health
Water Pollution . 5 minutes – mark the roll
An Introduction to Our Water Filtration Systems. Where Do We Work? 4,078 Students The Dominican Republic Haiti 9 Schools 8,803 Students 10 Schools.
Chapter 21 Water Pollution. Types of Water Pollution  Water pollution  Any physical or chemical change in water that adversely affects the health of.
‘Purification Station’ Farr High School Young Engineers.
Debbie Miller Water Quality Standards Toxic Criteria Coordinator.
Chapter 22 Water Pollution
DRINKING WATER QUALITY Centralized water treatment plants and watershed protection Centralized water treatment plants and watershed protection can provide.
1.Submit your Creek Survey if you haven’t already done so. 2.Which part of the water cycle is MOST responsible for polluting surface water? 3.Municipalities.
Water Quality Of Ground water and Surface water. Physical Characteristics Color Odor Taste Temperature Turbidity: cloudiness or haziness.
HISTORY OF OUR RESEARCH Research Technology Institute continues on the work of the Research Institute of Nanotechnology, which was established in 1997.
Website:
Lesson 8. C Describe examples of situations where solutions of known concentration are important. C Describe the process of treating a water.
Activities Review for the Water Unit Test.
Michael Carvan TECHNOLOGY Processing of any water source Only physical and no chemical process Nano filtration combined with other technologies.
EnRoll NO. EnRoll NO Department: Computer Science & Engineering.
Chlorine is used as a reliable water disinfectant. This substance is used to make the water clean, fit for drinking. Chlorine eliminates the presence.
What is Degassing? Degassing is removing dissolved gases from liquids. Applications includes: Removing biogenic hydrogen sulfide from groundwater, used.
Waste Water Treatment.
Review Water Pollution.
Sources of solid waste. Waste water. gas emissions
PREVENTING AND REDUCING SURFACE WATER POLLUTION
SCHEME OF THE THASMS TECHNOLOGY
Warm Up p65 Which part of the water cycle is MOST responsible for polluting surface water? Municipalities (towns) get drinking water from which two sources?
THE BEST METHOD FOR WATER FILTRATION – REVERSE OSMOSIS.
Water Treatment.
Warm Up p65 Which part of the water cycle is MOST responsible for polluting surface water? Municipalities (towns) get drinking water from which two sources?
Chapter 21 Water Pollution and Treatment
Water Pollution.
Water Pollution & Treatment
Water Pollution.
Water Treatment Plant in Ahmedabad
Water Pollution.
Pesticides The use of pesticides for agricultural and non-agricultural purposes is widespread and there are approximately 450 different active ingredients.
WATER Treatment & Quality
Water Quality United States
Water Treatment.
Presentation transcript:

NANOTECHNOLOGY

Today’s Global Water Crisis has created an urgent need for THASMS AQ3 water units!

APPLICATIONS Purifies water contaminated with micro-organisms and organic and inorganic materials – cleans filthy RIVERS! Produces drinking water and utility; for use in Pharmacy, Food and other industrial sectors, including Agriculture – super crops -preventing soil depletion! Recycles and purifies all Waste Water; guaranteeing a sustainable clean environment. Desalination of sea water – advanced technology. Produces drinking water and utility water for agriculture and industrial recycling cleaning systems. Regenerates and re-recovers any Waste Water in all fields of human activities, including natural sources.

THASMS-AQ3 Pure Water System THE SIMPLIFIED SCHEME OF THE THASMS TECHNOLOGY WASTE OR SALT INPUT WATER MECHANICAL IMPURITIES LARGER THAN 0.8 mm REMOVING INTENTIONALLY OPTIMIZED WATER FOR VARIOUS PURPOSES (DRINKING, GROWING PLANTS, FOOD INDUSTRY, ETC.) I. Grade: PRE FILTRATION (inlet water is deprived of most mechanical and chemical contaminants) by a system of mechanical and absorption filters II. Grade: NANOMEMBRANE SEPARATION (residual water fouled nanomembrane is divided into the permeate outlet, which is free from virtually 100% of the inorganic and inorganic substances, and waste super concentrate) III. Grade: STERILIZATION (nanomembrane separation output water is sterilized by powerful UVC lamp and subsequently filtered dead little bodies of bacteria on the HF membrane) IV. Grade: OPTIMIZATION (output water (after sterilization) is optimized according to the purpose for which it is intended. Water is structured and enriched with an optimum amount of minerals (and possibly organic matter in the case of agrooptimalization)) WASTE SUPERCONCENTRATE 1.standard mechanical prefiltration 2.glass prefiltration 3.cascade mechanical prefiltration 4.magnetic resonance 5.nanomembrane seperation 6.UVC sterilization 7.HF membrane filtration 8.ionization 9.mineralization 10.MC optimlzation 11.following optimization a) –by using the output water 12.following optimization b) –by using the output water

THASMS-AQ3 Pure Water System Technology

The Technical Parameters Type of treatment of contaminant - totally non-chemical(physical) or mechanical treatment type of an output product: technological and drinking water Technology of treatment: compounded TMC and amorphous alumino-silicate filtration, cascading mechanical filtration, membrane hybrid separation Maintenance of equipment: Non-chemical, using levitation of particles in pulsating multispectral electromagnetic field based on principal of magnetic and ultrasound resonance. Performance of the equipment : min 0,5m3, max 10m3 per day purified technological and drinking water in one module, minimum possible waste concentrate Automatic control of operation, liters / 24 hour, Visual and audible fault indication The operating pressure in the system : 2,3 - 3,8 bar, in turbo mode 9-16 bars, The temperature of input water : min 4 deg C - max 45 deg C. TDS: > ppm, SDI: > 10 turbidity, pH: Power input : min 0,75 and max 2,5Kw, Power consumption. Energy from 55 to 100 W / h Affectivity of filtration : min95, max 98 % Refuse concentrate : 70 : 1 after moisture elimination Type of separation: bacteriological, biological, mineral, chemical, gaseous Elimination of refuse; concentrated solids will be used in additional processing program Longevity of the system : when periodically maintained : 30 years Source of contaminant may be a river, lake, artesian well, pool, well, brackish water, rain water tank, process tank or overflow of wastewater treatment Output is a modified water technology, according to further sterilized, remineralization, oxygenated, ionized, structured, etc.... Storage tank plastic or stainless steel from 12 L to 350 L, Design frame, gauges, UV lamps - stainless steel

THSMS-AQ3 is an unrivalled providing the highest efficiency water purifying technology Its high capacity can meet global municipal and industrial recycling needs Produces water for any use from demineralised to drinking; with easy control increasing the mineral contents and oxygen to specially adjusted water for pharmacy, the food industry and the industry. Super-affordable in comparison with traditional solutions Significant lower operating costs & minimum energy consumption Long life - 30 years for the regular maintenance Electronic monitoring and control at a distance Small units can be modified to fit any system, easy to install Solar activated – goes to work immediately Environmental benefits of reduced water pollution and sustainable water-use Improves health and can reduced disease and deaths in third world countries - Extremely low power consumption - Low input and output pressures - Operation of the network, battery or solar panel - Noise level to 15 db - Super compact design - The minimum possible size - Wall and floor - The minimum possible pulse waste - The maximum possible output per hour - Two types of water technology; remineralization and sterilization - Triple check, extreme bacteria-FREE -- Vacuum extraction of membrane permeate - Optimized linear regulation waste - A combination of composite and hollow fiber membrane - The possible operation without power. Energy, at reduced performance - Traffic can be switched on turbo + 30% - Best price-performance ratio - The best ratio of treated wastewater and the market - Low maintenance costs - Customer service - Extremely long life with stable parameters - Optimization of operating conditions on the ground - Automatic pulse cleaning dynamic membranes - Automatic control of activity and intensity of UV lamps - Automatic level control mineralization - Stainless steel main parts

TYPES of APPLICATION Water filtration for a family (capacity 0,5 M3 – 2,) as drinking water plus utility water, a substantial reduction in consumption of water, as well as the reduction in pollution of the environment Full recycling of water systems; complete separation of objects from the source water (sanitation sought by survivalists) Purifies systems and offers standby management of water for farms and agricultural farms with inadequate resources of safe water Desalination of water systems for ships and areas without enough fresh water (solar panel activated) Systems cleaning and adjustments of water for villages and towns Systems cleaning and adjustments of water for industrial use Mobile water cleaning systems and adjustments of water for the army, industry, agriculture and ecology

All Types Micro-organisms All species micro-organisms Cryptosporidium, Giardia lamblia, Heterotrophic plate count, Legionella, total Coliforms (including fecal and E.Coli), Turbidity, Viruses (enteric) Disinfection Acids. Bromate, Chlorite, Haloacetic, total Trihalomethanes (TTHMs), Chloramines (as Cl2), Chlorine (as Cl2), Chlorine Dioxide (as ClO2) Inorganic Substances Antimony, Arsenic, Asbestos, Barium, Beryllium, Cadmium, Chromium, Copper, Cyanide, Fluoride, Lead, Mercury, Nitrate, Nitrite, Selenium, Thallium Organic Substances Acrylamide, Alachlor, Atrazine, Benzene, Benzo (a) pyrene (PAH’s), Carbofuran, Carbon Tetrachloride, Chlordan, Chlorobenzene, 2,4 -D Dalapon, 1,2 - Dibromo-3 -chloropropane (DBCP), o-Dichlorobenzene, p-Dichlorobenzene, 1,2 - Dichloroethane, 1,1 -Dichloroethylene, cis-1,2 -Dichloroethylene, trans-1,2 -Dichloroethylene, LEM, 1,2 -Dichloropropane, di- (2 -ethylhexyl) adipate, Di- (2 -ethylhexyl)phthalate, Dinoseb, Dioxin (2,3,7,8 -TCDD), Diquat, Endothall, Endrin, Epichlorohydrin, Ethylbenzene, Ethylene Dibromide, Glyphosate, Heptachlor, Heptachlor z, Hhexachlorobenzén, Hexachlorocyclopentadiene, Lindane, Methoxychlor, Oxamyl (vydate),, Polychloronared, biphenyls (PCBs), Pentachlorophenol, Picloram, -, Styrene, Tetrachlorethane, Toluenu, Toxaphene, 2,4,5 -TP (silvex), ), 1,2,4-Trichlorobenzene, 1,1,1-Trichloroethane, 1,1,2-Trichloroethane, Trichloroethylene, Vinyl chloride, Xylenes (total) Radio-Nuclides Alpha particles, Beta particles and photon emitters, Radium 226 and Radium 228 (combined), Uranium THSMS -AQ3 Pure Water System is able to clean water from any types of contaminants with 99.9% efficiency