Automatic xDSL Test Sequences of ELQ 30A ELQ 30A provides automatic bi-directional Measurement of principal characteristics of the subscriber line using two instruments. They are connected to the ends of the tested pair in MASTER-SLAVE arrangement. The two instruments communicate over the tested pair. ■ The Master initializes the measurements and collects the results. ■ The Slave performs the measurements according to the Master’s commands and sends back the results. ELQ 30A can be programmed as MASTER or SLAVE as well. Pre-programmed test parameter sets are provided containing: ■ Tolerance masks for Loss, LCL, Return Loss, Impedance measurement ■ Principal system parameters for VDSL2, VDSL1, ADSL2 +, ADSL, ADSL G LITE READSL2, ADSL G LITE, ADSL G.LITE2, SHDSL, HDSL, ISDN etc. systems. Using pre-programmed test parameter sets ELQ 30A provides immediate PASS/FAIL qualification and detailed information about the reasons of failure. Selectable xDSL Systems Selectable Test Programs Results of VDSL, ADSL Test Results of HDSL, SHDSL, ISDN Test To learn more click on the selected topic! ELEKTR NIKA

Selectable xDSL Systems ELEKTR NIKA

Selectable Test Programs Short Program means measurement of: ■ Loss ■ Noise Notice: Loss and Noise measurements are mandatory for data transfer speed calculation Long Program means measurement of: ■ Loss ■ Noise ■ Return Loss ■ Impedance ■ Balance Free Program means: Any combination of measurements ELEKTR NIKA

Detailed Results of VDSL and ADSL Qualification ELEKTR NIKA

Detailed Results of HDSL/SHDSL/ISDN Qualification ELEKTR NIKA

THANK YOU FOR YOUR ATTENTION!