The Mariners Load Releasing Hitch
Required Materials: Two Large Carabiners One 60” Rescue Runner One Dissimilar Carabiner
Clip one end of the rescue runner into a large carabiner
Run the opposite end through the second carabiner
Continue back through the first carabiner
Pull carabiners 8”-10” apart and begin to wrap the rescue runner around the two parallel strands
Wrap around the parallel strands a minimum of four times
Pass the end of the rescue runner between the two strands near the second carabiner
Attach the dissimilar carabiner to the end of the rescue runner
Attach the dissimilar carabiner to the second carabiner
To transfer a load - Start by unclipping the dissimilar carabiner & re-clipping it around the parallel strands.
Slowly unwind the wraps which transfers the load