PGS Introduction "Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio). "Professional Series – Red label" : Super tower or Super mid-tower cases with elegant, clean line designs. "Aluminum – Silver label" : Unique “Full aluminum” cases targeting at power users, professionals and gamers. "Ultimate Gaming Series – Black label" : Ultimate gaming cases targeting at the extreme gamers. This Series offers gamers with most functions, expandability and Extreme cooling. "Compact – Blue Label" : Small form factor case series including cube cases, mini-ITX and Mini-Tower (Micro-ATX). Red

Design Concept Aerocool is proud to announce our first Mid-Tower case (Model : Rs-9 Devil Red) under the PGS-R series (Professional Series – Red Label). Rs-9 Devil Red is one of the best “Mid-Tower” case in the market today. This case is not only elegantly designed and solidly constructed; it also delivers high performance, expandability, protection and cooling. The "ALL BLACK" chassis (both internal and external) with Black/Red screw- less clips, fans and PCI-cover give this chassis a GREAT look. The Rs-9 Devil Red is designed with “User-Friendly” concept in mind and it gives gamers great expandability and protection for their Hard Drives. Its “Screw-less” chassis and Pre-drilled holes on the motherboard plate for cable routing make this chassis an easy install. This chassis also offers great expansion capabilities. It can support 9 x 5 1/4” devices, 3 x 3.5" HDDs (internal) and 1 x 3.5" external device such as a Floppy drive or a Card Reader. Your Hard Drives are well protected from shock with the “anti-vibration” rubbers. The Rs-9 Devil Red case also delivers optimal air flow and supports Longer High-End VGA cards up to 295mm. Your system will be cooled by 6 x 12/14cm fans (1 x12cm fan in front, 1 x 12cm fan in the rear, 2 x 12/14cm fans on top and 2 x 12cm fans on the side panel). These fans can be controlled by a "3-Mode" LED fan controller (Low speed, Medium Speed and High Speed).

Gallery FrontBack Side Photos are for exterior reference only. Not all fans are inclusive. Please see specification page. Top

Features - High performance "Mid-Tower" for gamers and enthusiast - Solidly constructed "ALL BLACK" chassis – 0.6mm SECC Japanese Steel and beautifully finished ALL BLACK interior - High-end Graphic card Support - Supports longer high-end VGA cards up to 295mm - High Expandability - Supports 9 x 5 1/4" bays, 3 x 3.5" HDDs (internal) and 1 x 3.5" external devices such as Floppy or a Card Reader. - HDD Protection - Includes anti-vibration rubbers to protect your HDDs from shock. - Ease of Installation – New "Easy-install" screw-less kits are included for the 5 1/4" devices. - Easy Access Top I/O ports - 2 x USBs, Audio/Mic and E-Sata ports - Smart Cable Management – Cable routing is pre-drilled on the MB so users can hide cables behind the MB tray. - Dust Protection - Includes front, bottom and top "Dust Filter" to prevent dust entering your computer - Mesh PCI cover - Includes Red metal mesh PCI covers for better ventilation - RED LED fan controller - 3 "Mode" (Low, Medium and High) RED LED fan controller is included to control up to 20 Watts of power. - Bottom PSU position - the bottom PSU location enables PSUs to suck in cold air and provides better air flow for your system. - Water-cooling Support - water-cooling holes are pre-drilled to support water-cooling systems!!

Specifications Spec Cooling System Chassis Dimensions Material Motherboards 5.25" bay (External) 3.25" bay (External) 3 x 3.5” HDDs Expansion Slots Max length space available for PCI slots I / O Ports Fan Rated voltage Starting voltage Power consumption Rated current Speed Air Flow (CFM) Air pressure Noise (dBA) Bearing :::::::::::::::::: :::::::::::::::::::: 443(H) x 200(W) x 476(D) SECC 0.6mm ATX / Micro ATX 9 x 5.25" (External) 1 x 3.5" (Convert from 5.25”) 3 x 3.5” HDDs (Internal)(w/adaptors) 7 Slots 295 mm 2 x USB2.0 / e-SATA / Mic & headphone (AC97 & HD audio) 120 x 120 x 25mm 12V ≤ 9V(Power ON/OFF) 2.64W 0.22A 1500 RPM +- 10% CFM (Max) 2.1mm H2O dB-A Sleeve 120 x 120 x 25mm 12V ≤ 9V(Power ON/OFF) 2.64W 0.22A 1500 RPM +- 10% CFM (Max) 2.1mm H2O dB-A Sleeve FrontRear

Air Flow Superb Airflow - install up to 6 x 12/14 cm fans !!! 1. Front - 1 x 12cm fan (1 x 12cm RED LED fan included) 2. Back - 1 x 12cm fan (1 x 12cm RED LED fan included) 3. Side - 2 x 12/14cm fans (optional) 4. Top - 2 x 12/14cm fans (optional)

Inside Dual fans on top panel to extract heat from chassis Pre-drill pipe holes for water cooling w/meshed PCI slot Cables are neatly tugged behind the chassis Filter included to prevent dust from entering PSU Tool-free for 5.25” bay HDDs can be mounted with adaptors provided Provide easy access to CPU cooler’s back plate 5.25” > 3.5” adaptor for FDD Adaptors are equipped with anti-vibration rings 295mm Sufficient depth of chassis for installing long cards

Close Up

Low – 50% of max speed Power Reset Medium – 80% of max speed High – full speed Fan Control