How to Use the Microphone System It’s as Simple as 0, 1, 2, 3!

The Microphone System 2 This is what the microphone system looks like

The Microphone System The microphone system is separate from the A/V equipment on the cart 3

The Microphone System 4 This is where to plug in the system

The Microphone System 5 This is the speaker

The Microphone System 6 This is the system control box

The Microphone System 7 Please don’t open the system control box!

The Microphone System 8 The system power switch is found at the rear of the base

The Microphone System 9 These are the microphon e channel boxes

The Microphone System 10 This blue plastic box holds the other system components

What’s in the Blue Box 11 In the blue box you will find the microphones, spare batteries, etc.

What’s in the Blue Box 12 There are two cordless handheld microphones

What’s in the Blue Box 13 And one cordless headset microphone

Other Things in the Blue Box 14 Spare batteries Sanitary wipes System instructions Optional stand

How to Get the System Going STEP 0: Plug in the system STEP 1: Turn on the system STEP 2: Turn on the channels STEP 3: Turn on the microphones 15

How to Get the System Going STEP 0: Plug in the system STEP 1: Turn on the system STEP 2: Turn on the channels STEP 3: Turn on the microphones 16 You can usually skip STEPS 1 and 2

0 STEP 0: Plug in the System If the system is not plugged in, plug it in 17

STEP 1: Turn on the System 18 Check the system light at the rear of the base

STEP 1: Turn on the System If the light at the rear of the base is not on 19

STEP 1: Turn on the System 20 Press the power switch located next to the number 1

STEP 2: Turn on the Channels 21 Check the lights on the three microphone channel boxes 2 2 2

STEP 2: Turn on the Channels 2 22 If the light on a channel box is not on

STEP 2: Turn on the Channels 2 23 Press the switch located here

STEP 3: Turn on the Mics 24 Find the two pouches holding cordless handheld microphones

STEP 3: Turn on the Mics 25 Remove the contents of the pouch

STEP 3: Turn on the Mics 26 Open the battery compartment by pulling here on the side of the cover

STEP 3: Turn on the Mics 27 Instead of pulling on this clip here

STEP 3: Turn on the Mics 28 Insert the batteries

STEP 3: Turn on the Mics 29 Make sure they are pointing in the right direction

STEP 3: Turn on the Mics Close the battery cover and screw on the base 30

STEP 3: Turn on the Mics Turn on the microphone by holding down the recessed button for a few seconds 31

STEP 3: Turn on the Mics 32 The microphone comes on, indicating remaining battery life (5 hours 20 minutes in this instance)

STEP 3: Turn on the Mics To use the microphone, hold it close to the mouth and speak directly into it 33

STEP 3: Turn on the Mics Remove the headset microphone from its pouch 34

STEP 3: Turn on the Mics 35 Turn on the headset control

STEP 3: Turn on the Mics 36 This light will come on

STEP 3: Turn on the Mics Loop the headset over the facilitator or presenter’s ears 37

STEP 3: Turn on the Mics 38 Make sure the microphone is close enough to the mouth

STEP 3: Turn on the Mics Clip the headset control on your belt or put it in a pocket 39

●Remove batteries from handheld micro- phones, putting everything in the pouches ●Turn off the headset microphone and return it with its control to the pouch ●Return the pouches in the blue box ●Unplug the system (no need to turn off the system or the channel boxes) At the End of the Day 40