KEY JOBS EXECUTED MACHINING

PA 21 Tubsheet machining Material :- Forge steel Weight:- 27MT, OD:- Ø5300 Operation:- Faces and Groove machining PA 21 Tubsheet machining Material :- Forge steel Weight:- 27MT, OD:- Ø5300 Operation:- Faces and Groove machining Both faces machined for UT Both faces machined for UT Raw Material

PA 42 Tubsheet machining Material : SS 316 Weight:- 2.7MT, OD:- Ø1267, Thickness:- 205mm Operation:- OD, ID, Groove and step machining PA 42 Tubsheet machining Material : SS 316 Weight:- 2.7MT, OD:- Ø1267, Thickness:- 205mm Operation:- OD, ID, Groove and step machining

PA 48 Flange machining Material : Forge Steel Weight:- 2.9MT, OD:- Ø1370, Height:- 778mm Operation:- OD, ID, Profile machining and Drilling of dia.79mm PA 48 Flange machining Material : Forge Steel Weight:- 2.9MT, OD:- Ø1370, Height:- 778mm Operation:- OD, ID, Profile machining and Drilling of dia.79mm

Mould basis machining Material : CI Weight:- 20MT, OD:- Ø3033, Height:- 425mm Operation:- ID, Profile machining and Drilling Mould basis machining Material : CI Weight:- 20MT, OD:- Ø3033, Height:- 425mm Operation:- ID, Profile machining and Drilling

RV Bottom body Material : SS 316 Weight:- 2.4MT, OD:- Ø1500, Height:- 1800mm Operation:- ID, Profile machining and Lip machining, ‘O’ groove with Finish Achieved Ra 0.8 RV Bottom body Material : SS 316 Weight:- 2.4MT, OD:- Ø1500, Height:- 1800mm Operation:- ID, Profile machining and Lip machining, ‘O’ groove with Finish Achieved Ra 0.8

PA 21 Tubsheet machining Material :- Forge steel Weight:- 27MT, OD:- Ø3200 Operation:- OD, Faces, Step, Groove machining and Drilling of Dia.85mm PA 21 Tubsheet machining Material :- Forge steel Weight:- 27MT, OD:- Ø3200 Operation:- OD, Faces, Step, Groove machining and Drilling of Dia.85mm Raw Material Finish Tube sheet

Grinding Table Material :- Cast CS Weight:- 22MT, OD:- Ø3300 Height:- 1950mm Operation:- OD, Faces, Step, Groove machining Grinding Table Material :- Cast CS Weight:- 22MT, OD:- Ø3300 Height:- 1950mm Operation:- OD, Faces, Step, Groove machining Raw Material Finish Grinding table

SA-07 Block Material :- Forged Steel (Hardness 60 Hrc) Weight:- 18MT, Length:- Ø2250 Height:- 685mm Operation:- Faces machining and Drilling 650mm deep SA-07 Block Material :- Forged Steel (Hardness 60 Hrc) Weight:- 18MT, Length:- Ø2250 Height:- 685mm Operation:- Faces machining and Drilling 650mm deep Raw Material Finish Block

PA-42 shell Material :- SS 316 Weight:- 3.2MT, Length:- Ø1260 Height:- 998mm Operation:- Faces machining PA-42 shell Material :- SS 316 Weight:- 3.2MT, Length:- Ø1260 Height:- 998mm Operation:- Faces machining Raw Material Finish Shell

PA-46 B tube sheet Material :- Forged Steel Weight:- 19MT, Length:- Ø5400 Height:- 275mm Operation:- Faces, OD, Step ID and Profile machining PA-46 B tube sheet Material :- Forged Steel Weight:- 19MT, Length:- Ø5400 Height:- 275mm Operation:- Faces, OD, Step ID and Profile machining

Nozzle Material :- INCONEL 625 Weight:- 1.7MT, OD:- Ø770, Height:- 780 Operation:- Faces, OD, Step ID and Gasket Groove machining Nozzle Material :- INCONEL 625 Weight:- 1.7MT, OD:- Ø770, Height:- 780 Operation:- Faces, OD, Step ID and Gasket Groove machining

Rotor Support pad plate Material :- MS Length: mm, Width:- 700mm Operation:- Faces, Blue matching, Flatness 0.05mm. Rotor Support pad plate Material :- MS Length: mm, Width:- 700mm Operation:- Faces, Blue matching, Flatness 0.05mm.

Baffels Drilling Material :- CS, SS 316, SS 304 Operation:- Drilling Baffels Drilling Material :- CS, SS 316, SS 304 Operation:- Drilling

Shell machining Material :- SS 316, Operation:- Gasket face machining and Drilling on Flange Shell machining Material :- SS 316, Operation:- Gasket face machining and Drilling on Flange

Pipe Branch drilling Material :- MS Operation:- Pad Face machining and Counter Drilling on Pipe Pipe Branch drilling Material :- MS Operation:- Pad Face machining and Counter Drilling on Pipe

Spiral case MCV pump Material :- MS, Operation:- ID, Step ID, face machining and Drilling on Flange Spiral case MCV pump Material :- MS, Operation:- ID, Step ID, face machining and Drilling on Flange