FREQUENCY SHIFT KEYING

Slides:



Advertisements
Similar presentations
Envelope Detector Conventional DSB-AM signals are easily demodulated by an envelope detector It consists of a diode and an RC circuit, which is a simple.
Advertisements

What is a signal ? A function of one or more independent variables which contain some information. Voltage, Current ,temperature are all different signals.
Principles of Electronic Communication Systems Second Edition Louis Frenzel © 2002 The McGraw-Hill Companies.
Chapter : Digital Modulation 4.2 : Digital Transmission
COMMUNICATION SYSTEM EEEB453 Chapter 3 (III) ANGLE MODULATION
Lock-in amplifiers Signals and noise Frequency dependence of noise Low frequency ~ 1 / f –example: temperature (0.1 Hz), pressure.
Introduction 1st semester King Saud University
Designing a Lock-in Amplifier with Analog to Digital Conversion Muir Morrison Rachel Miller Mike Gallaspy.
EE302 Lesson 21: Transmission of Binary Data in Communication Systems
Data Communication Analog Transmition Behrouz A. Forouzan 1Data Communication - Analog Transmition.
Principles of Electronic Communication Systems
Lecture 7 AM and FM Signal Demodulation
Part A: Controlling Oscillation Frequency with Capacitors and Resistors Part B: Diodes and Light Experiment Timer.
Oct 11, 2005CS477: Analog and Digital Communications1 FM Generation and Detection Analog and Digital Communications Autumn
School of Electrical, Electronics and Computer Engineering University of Newcastle-upon-Tyne Baseband Digital Modulation Baseband Digital Modulation Prof.
EE311: Junior EE Lab Phase Locked Loop J. Carroll 9/3/02.
Modulation                                                                 Digital data can be transmitted via an analog carrier signal by modulating one.
Modulation Modulation => Converts from digital to analog signal.
MULTIPURPOSE DIGITAL CDMA FM REMOTE CONTROLLER FIRDOUS KAMAL MIZAN MIAH EE – 513 4/19/2005 COMMUNICATION ELECTRONICS.
Chapter 3 – Angle Modulation
Punjab EDUSAT Society (PES) Contact info: Phone: Oct,
Principles of Electronic Communication Systems
Chapter 6 FM Circuits.
IT-101 Section 001 Lecture #15 Introduction to Information Technology.
Principles of Electronic Communication Systems
Lock-in amplifiers
ELG4135-Electronics III Professor: Dr. Riadh Habash Presentation date: Nov 28 th, 2006 Group Members: Yichen Fan Gefei Zhou Zhanglei Song Infrared Entrance.
General Licensing Class G7A – G7C Practical Circuits Your organization and dates here.
Data Transmission The basics of media, signals, bits, carries, and modems (Part II)
Electronics Involves the use of devices and circuits to control the flow of electric current to achieve some purpose. These circuits contain: Resistors,
Phase-Locked Loop Design S emiconducto r S imulation L aboratory Phase-locked loops: Building blocks in receivers and other communication electronics Main.
Chapter 13 Linear-Digital ICs. Copyright ©2009 by Pearson Education, Inc. Upper Saddle River, New Jersey All rights reserved. Electronic Devices.
Generation of FM Two methods of FM generation: A. Direct method:
Chapter 10 Optical Communication Systems
COMMUNICATION SYSTEM EEEB453 Chapter 2 AMPLITUDE MODULATION Dept of Electrical Engineering Universiti Tenaga Nasional.
McGraw-Hill © 2008 The McGraw-Hill Companies, Inc. All rights reserved. Principles of Electronic Communication Systems FM Circuits.
TELECOMMUNICATIONS Dr. Hugh Blanton ENTC 4307/ENTC 5307.
Eeng Chapter 4 Bandpass Circuits   Limiters   Mixers, Upconverters and Downconverters   Detectors, Envelope Detector, Product Detector  
Wireless Transmission Professor: Dr. Miguel Alonso Jr.
TELECOMMUNICATIONS Dr. Hugh Blanton ENTC 4307/ENTC 5307.
Chapter : Digital Modulation 4.2 : Digital Transmission
Principles of Electronic Communication Systems
OSCILLATORS Dr.S.SUJA Associate Professor
CommunicationElectronics Principles & Applications Chapter 5 Frequency Modulation Circuits.
Amplitude Modulation Circuits
11. FM Receiver Circuits. FM Reception RF Amplifiers Limiters
DIGITAL MODULATION.
Guide Presented by Mr.M Cheenya V.Abhinav Kumar 11E31A0422 Asst.Professor K.Shiva Kumar 11E31A0423 K.Rajashekhar 11E31A0424 K.Chaithanya Sree 11E31A0428.
 ACCELEROMETER  TRANSMITTER- BLOCK DIAGRAM  RECEIVER- BLOCK DIAGRAM  COMPONENTS DESCRIPTION- ENCODER TRANSMITTER RECEIVER OPTICAL SENSOR.
Function Generators. FUNCTION GENERATORS Function generators, which are very important and versatile instruments. provide a variety of output waveforms.
RF TRANSMITTER MODULE Radio frequency (RF) transmitters are widely used in radio frequency communications systems. With the increasing availability of.
Measurement and Instrumentation
The Working Theory of an RC Coupled Amplifier in Electronics.
ECE445: Senior Design Spring 2015 Team 17: Weather Jukebox Sang Yun Bang, Thomas Fedrigon, Shanda Lu.
CHAPTER 4. OUTLINES 1. Digital Modulation Introduction Information capacity, Bits, Bit Rate, Baud, M- ary encoding ASK, FSK, PSK, QPSK, QAM 2. Digital.
FUNCTION GENERATOR.
Eeng Chapter 4 Bandpass Circuits   Limiters   Mixers, Upconverters and Downconverters   Detectors, Envelope Detector, Product Detector  
Electronic Devices and Circuit Theory
Principles of Electronic Communication Systems. Chapter 6 FM Circuits.
Demodulation/ Detection Chapter 4
Electronic Devices Ninth Edition Floyd Chapter 16.
UNIT-IV Application of Special I.C’s.
KOMUNIKASI DATA Materi Pertemuan 10.
Chapter 13 Linear-Digital ICs
Video Transmitting Robot
OBJECTIVE AND FEATURES:
Lock-in amplifiers
PART 3:GENERATION AND DETECTION OF ANGLE MODULATION
General Licensing Class
8.5 Modulation of Signals basic idea and goals
Presentation transcript:

FREQUENCY SHIFT KEYING FSK: SIGNALS AND DEMODULATION

CONCEPTS Existing concept: Design a FSK modulator using 555/XR 2206 and convert it to sine wave using filter and transmit the same using IR LED and demodulate the same PLL NE 565/XR 2212. Proposed concept: To design a FSK modulator using XR 2206 monolithic function generator to produce a sine wave and transmit the signal using IR LED over wireless channel and to demodulate it using PLL NE 565.

WHAT IS FSK? Frequency-shift keying or FSK is a frequency modulation scheme in which digital information is transmitted through discrete frequency changes of a carrier wave. The simplest FSK is binary FSK (BFSK) . The "1" is called the mark frequency and the "0" is called the space frequency.

MODULATION

The minimum duration of a mark or space condition is called the element Length. Typical values for element length are between 5 and 22 milliseconds. An alternate way of specifying element length is in terms of the keying speed(Bauds). Baud = ______1______ Element length

COMPONENTS IN FSK: XR-2206: It is a monolithic function generator IC capable of producing high quality square, triangle, ramp and pulse waveform of high stability and accuracy. PLL or Phase Locked Loop in FSK e.g. PLL 565 is used as a demodulator. IR LED for transmitting over wireless channels Instead of PLL 565 we can also use XR-2212 also as a precision Phase locked loop.

Amplifier and equalizer Laser APD Digital Information Digital output Source Encoder Laser Driver circit Amplifier and equalizer Decoder BLOCK DIAGRAM

XR-2206:FUNCTION GENERATOR: FEATURES Low-Sine Wave Distortion, 0.5%, Typical Excellent Temperature Stability, 20ppm/°C, Typ. Wide Sweep Range, 2000:1, Typical Low-Supply Sensitivity, 0.01%V, Typ. Linear Amplitude Modulation TTL Compatible FSK Controls Wide Supply Range, 10V to 26V Adjustable Duty Cycle, 1% TO 99%

PIN DETAILS OF XR2206

SYSTEM DESCRIPTION: The XR-2206 is comprised of four functional blocks: a voltage-controlled oscillator (VCO), an analog multiplier and sine-shaper; a unity gain buffer amplifier; a set of current switches.

XR-2206 BLOCK DIAGRAM

MODULATION PROCESS: The XR-2206 can be operated with two separate timing resistors, R1 and R2, connected to the timing Pin 7 and 8, respectively. Depending on the polarity of the logic signal at Pin 9, either one or the other of these timing resistors is activated. Thus, the output frequency can be keyed between two levels. f1 = 1/R1C and f2 = 1/R2C

NE/SE565:PLL The NE/SE565 Phase locked loop (PLL) is a self-contained, adaptable filter and demodulator for the frequency range from 0.001Hz to 500kHz. The circuit comprises a voltage-controlled oscillator of exceptional stability and linearity, a phase comparator, an amplifier a low pass filter.

BLOCK DIAGRAM:

DEMODULATION USING NE/SE565 PLL

DEMODULATION PROCESS: The demodulator receives a signal at one of the two distinct carrier frequencies, 1,270 Hz or 1,070 Hz. Capacitance coupling is used at the input to remove a dc level. As the signal appears at the input of 565 PLL, the PLL tracks between the two possible frequencies with a corresponding dc shift at the output.

R1 and C1 determine the free-running frequency of the VCO. A three-stage RC ladder filter is employed for removing the sum frequency component from the output. Comparator IC 710 is used to compare the decoded output with the reference. An input at frequency 1,070 Hz and 1,270 Hz drives the demodulator output voltage to a more positive voltage level and less positive output, respectively.

WIRELESS TRANSMISSION: Any wireless communication system has three important parts. Transmitter: IR LED Receiver : Photo diode Transmission Medium: Air

IR(INFRARED) TRANSMISSION: Infrared (IR) light is electromagnetic radiation with a wavelength longer than that of visible light, measured from the nominal edge of visible red light at 0.74 micrometers, and extending conventionally to 300 micrometres. These wavelengths correspond to a frequency range of approximately 1 to 400THz, and include most of the thermal radiation emitted by objects near room temperature.

BLOCK DIAGRAM:

CONCLUSION FSK signals take many different forms depending on their intended application where binary FSK is the simplest of them. With the increasing sophistication of electronics and signal detection theory, it is clear that FSK modulators and demodulators, can be utilized to optimally demodulate the many different digital signal formats.