Erik Cates ME 3322
Uses a heat source(gas or propane) to run a cooling process Cooling is caused by heat absorption by refrigerant as it is evaporated, which removes it from the system Refrigerant gas is then converted back to liquid form to repeat cycle Most commonly used refrigerant is Ammonia
Generator- receives heat from source, produces ammonia gas Separator- separates ammonia gas from water Condenser- hot ammonia gas is cooled, condensed to liquid form Evaporator- evaporates ammonia liquid, creates cold effect inside refrigerator Absorber- absorbs ammonia gas into water
Dalton’s Law- the total pressure from gas mixture is sum of all partial pressures Hydrogen doesn’t react with ammonia- hydrogen simply takes up space In evaporator- hydrogen/ammonia mixture causes the partial pressure of ammonia to be lowered, which lowers the boiling point of the ammonia to below room temperature
No moving parts Doesn’t require electricity Quiet Makes use of excess heat No HCFC’s – harmful to environment
rigerator bin/faq.cgi?_recurse=1&file=17 ured/21_62.jpg