1 POWERPOINT PRESENTATION ON FUEL AND ITS CHARACTERISTICS BY: POOJA BHANOT LECTURER IN CHEMISTRY Pt. J.R GOVT. POLY. COLLEGE HOSHIARPUR.

Slides:



Advertisements
Similar presentations
Fuels A Fuel is a substance that produces Energy when burned.
Advertisements

The Haber Process The Haber Process combines nitrogen from the air with hydrogen derived mainly from natural gas (methane) into ammonia. The reaction is.
FOSSIL FUELS Please click to step through this presentation.
CALORIFIC VALUES. Calorific Values The calorific value of a combustible substance is the heat generated when 1 kg of that substance is completely burned.
Fossil fuels Section 1.
mmcl
Fuels and Combustion Lec.8. Introduction Any source of heat energy is termed as fuel fuel means a substance composed of carbon and hydrogen (hydrocarbon).
Hydrocarbon Fuel Problems Noadswood Science, 2011.
Fuels and Combustion.
Chemistry of Fire.
Combustion & Fossil Fuels Chapter Combustion (1.11) In combustion, a substance reacts rapidly with oxygen and releases energy. The energy may be.
PROPERTIES OF FLAMMABLE MATERIALS. Flammability Flammable Flammable –Capable of being ignited and of burning –Synonymous with combustible.
Combustion Reactions.
BURNING FUELS Noadswood Science, Burning Fuels To know the processes involved with burning fuels Monday, May 11, 2015.
W E L C O M Combustion and flame.
Pharos University جامعه فاروس Faculty of Engineering كلية الهندسة Petrochemical Department قسم البتروكيماويات PE 330 ENERGY CONSERVATION LECTURE (2) 1-Fuels.
Ch 100: Fundamentals for Chemistry Chapter 4: Properties of Matter Lecture Notes.
Capturing Carbon dioxide Capturing and removing CO 2 from mobile sources is difficult. But CO 2 capture might be feasible for large stationary power plants.
1 The Combustion of Hydrocarbon Fuels 朱 信 Hsin Chu Professor Dept. of Environmental Engineering National Cheng Kung University.
Chapter 15 Chemical reactions.  Any material that can be burned to release thermal energy is called a fuel.  Most familiar fuels consist primarily of.
PHYSICAL AND CHEMICAL CHANGES. Vocabulary #4 1. Force- A push or a pull. 2. Electrical Force- The force between two charged objects. 3. Magnetic force-
Crude Oil Noadswood Science, 2011.
Index Basic needs How to extinguish Fire The Ignition temperature Inflammable combustion Rapid & Spontaneous Combustion Zones Of Candle Flame Explosion.
Fire Basics Mr. McNiff CHS Forensics. The Combustion Reaction Combustion is a rapid oxidation reaction The combination of fuel and oxygen to form carbon.
Calderglen High School.
Properties of Fuels.
INTRODUCTION  A fuel can be defined as a combustible substance, containing carbon as a main constituent, which on proper burning gives large amount.
Estimation and Selection of Air for a Fuel P M V Subbarao Professor Mechanical Engineering Department A Criteria for Sizing of Furnace & Furnace Accessories.
TOPIC 5 Fuels A Fuel is a substance that produces Energy when burned. A good fuel releases it’s energy over a longer period of time A reaction in which.
What does air consist of?
Table of Contents Chapter Preview 6.1 Observing Chemical Change
Sources Of Energy Made By:- Students of 8 th A Rushil Nayee-51 Nishant Inamdar-06 Deep shah-55 Nidhip Sharma- 30.
Fire Safety. Fire Safety Introduction Fires ravage 28,000 industrial facilities each year, causing $596 million in direct property damage. Ninety percent.
Prepared By: SHIKHA. PATEL (T-13EC040) SUBJECT EME TOPIC ENERGY.
Science Proficiency Review
Richard Kelly, D.I.T.1 Facilities Management and the Environment BSc in Electrical Services and Energy Management.
CHAPTER - 6 COMBUSTION AND FLAME
Fuels & Energy IB Option AP/IB Chemistry Chanlder High School.
Solid Fuels Storage of Coal. The storage of coal has many disadvantage: Blockage of money Blockage of space Deterioration in quality Fire hazards It is.
Chemistry The study of the properties of matter and how matter changes. Element – a substance that cannot be broken down into any other substances by.
COMBUSTION AND FLAME. ● The chemical process in which a substance reacts with oxygen to produce heat is called combustion. Combustion ● Substance which.
Fuels Does an athlete need fuel?. Fuels which burn with a flame.. … need the 3 things shown above.
1. HUNTER-GATHERER SOCIETIES HAD VERY LIMITED ENERGY REQUIREMENTS. THESE WERE MET USING WOOD (A RENEWABLE RESOURCE). 2. THE INDUSTRIAL REVOLUTION CHANGED.
Lecture 22 Fuels. Reaction Rate. Electrolysis. Liquid, Solid, and Gaseous Fuels Reaction Rates Oxidation and Reduction Chapter 11.6 
KS3 Chemistry H2 – Energy from chemical reactions 8th January 2007.
Power Plant Engineering
It is a comastable substance having carbon as the masor constituent which is the proper burning profiles a large quantity of heat. That can be used economically.
THERMAL POWER PLANT.
SCIENCESCIENCE COMBUSTION AND FLAME Presented By :-- B.Kiran Kumar (TGT BIO) Presented By :-- B.Kiran Kumar (TGT BIO) 6 Chapter.
1.  FUEL  COMBUSTION OF FUEL  CLASSIFICATION OF FUEL  CALORIFIC VALUE  CHARACTERISTICS OF GOOD FUEL  REVIEW OF TOPIC IN TERMS OF MULTIPLE CHOICE.
GOVERNMENT ENGINEERING COLLEGE, BHARUCH Chemical Engineering Department Sem-III Subject : Process calculation Topic : Type of Fuels.
Chemical Reactions Ch 2.1 Observing Chemical Change Ch 2.2 Describing Chemical Reactions Table of Contents – Book L.
A PRESENTATION ON: FUels & Combustion SUBMITTED TO: SUBMITTED BY:
PHYSICAL AND CHEMICAL CHANGES
Engineering Chemistry (revised edition)
S2 Chemistry Materials from the Earth
9H Using chemistry Reactions and energy Making useful substances
Vocabulary ARSON AND EXPLOSIVES.
Elements, compounds and mixtures
THERMOCHEMISTRY OF COMBUSTION
Please write into notebook 
Standard Grade Chemistry Topic 5
FIRE Herb Krelle assembled by
FUELS.
Burning fuels: three sources of pollution
Portable Fire Extinguisher Overview
Fossil fuels Section 1.
Chemistry Combustion LabRat Scientific © 2018.
ENERGY - I Prof . Tasneem K.H Khan Asstt Professor (SR)
Thermo chemistry of combustion
Presentation transcript:

1 POWERPOINT PRESENTATION ON FUEL AND ITS CHARACTERISTICS BY: POOJA BHANOT LECTURER IN CHEMISTRY Pt. J.R GOVT. POLY. COLLEGE HOSHIARPUR

2 TOPICS TO BE COVERED FUEL COMBUSTION OF FUEL CLASSIFICATION OF FUEL CALORIFIC VALUE CHARACTERISTICS OF GOOD FUEL REVIEW OF TOPIC IN TERMS OF MULTIPLE CHOICE QUESTIONS

3 FUEL The combustible substances which on burning in air produces large amount of heat that can be used economically for domestic and industrial purposes are called fuels. Eg. Wood,Coal etc

4 COMBUSTION OF FUEL The term combustion refers to the exothermal oxidation of a fuel, by air or oxygen occurring at a sufficiently rapid rate to produce a high temperature, usually with the appearance of a flame.

5 As most of the fuels contain carbon or carbon and hydrogen, the combustion involves the oxidation of carbon to carbon dioxide and hydrogen to water. Sulphur, if present, is oxidised to sulphur dioxide while the mineral matter forms the ash. Complex fuels like coal undergo thermal decomposition during combustion to give simpler products which are then oxidised to carbon dioxide, water etc.

6 e.g.: Coke on combustion gives carbon dioxide Coal → Coke + Coal gas C (coke) + O 2 → CO 2

7 CLASSIFICATION OF FUEL FUEL OCCURENCE PHYSICAL STATE

8 On the basis of occurrence FUEL PRIMARY OR NATURAL FUEL SECONDARY OR ARTIFICIAL FUEL

9 CLASSIFICATION OF FUEL Fuels are classified as Primary fuels – F uels which occur naturally such as coal, crude petroleum and natural gas. Coal and crude petroleum, formed from organic matter many millions of years ago, are referred to as fossil fuels. Secondary fuels – F uels which are derived from naturally occurring ones by a treatment process such as coke, gasoline, coal gas etc.

10 On basis of physical state FUEL SOLIDLIQUIDGAS

11 FUEL Primary Fuels Solid Eg. Wood,peat Liquid Eg.crude oil Gas Eg.Natural gas Secondary fuels Solid EgCoke,charcoal Liquid Eg. Petrol,LPG Gas Eg.coal gas,water gas

12 CHARACTERISTICS OF GOOD FUEL 1.HIGH CALORIFIC VALUE : A good fuel should have high calorific value i.e. it should produce large amount of heat on burning.

13 CALORIFIC VALUE The calorific value of a fuel is defined as the quantity of heat (expressed in calories or kilo calories) liberated by the complete combustion of unit weight (1gm or 1kg) of the fuel in air or oxygen,with subsequent cooling of the products of combustion to the initial temperature of the fuel.

14 contd The calorific value of a fuel depends upon the nature of the fuel and the relative proportions of the elements present, increasing with increasing amounts of hydrogen. Moisture if present, considerably reduces the calorific value of a fuel. The calorific value may be theoretically calculated from the chemical composition of the fuel.

15 contd. If both hydrogen and oxygen are present, it may be assumed that all the oxygen are already combined with 1/8 of its weight of hydrogen to form water. This fraction is then deducted from the hydrogen content of the fuel in the calculation. Thus for a fuel containing carbon, hydrogen, oxygen and sulphur, the calorific value of the fuel is given by DULONG FORMULA

16 Determination of calorific value from Dulong formula Calorific value = 1/100[8080 C {H − O/8 } S] kcal/kg where C, H, O, S refer to % of carbon, hydrogen, oxygen and sulphur respectively.

17 GROSS AND NET CALORIFIC VALUE With fuels containing hydrogen, two calorific values are distinguished, the gross and the net calorific value. GROSS CALORIFIC VALUE The gross calorific value refers to the heat evolved when the water produced by combustion is condensed as a liquid. The net value gives the heat liberated when water is in the form of steam or water vapour.

18 contd Thus the gross calorific value (or the higher heating value) is the quantity of heat liberated by the complete combustion of unit weight of the fuel with subsequent cooling of the products of combustion to the initial temperature of the fuel.

19 NET CALORIFIC VALUE Under normal working conditions, water vapours produced during combustion are not condensed and escape as such along with the hot gases.Hence lesser amount of heat is available, which is called Lower or net calorific value.

20 Contd. Net calorific value is the heat produced when unit mass of fuel is burnt completely and products of combustion are allowed to escape.

21 contd The net calorific value (or the lower heating value) is defined as the gross calorific value minus the latent heat of condensation of water (at the initial temperature of the fuel), formed by the combustion of hydrogen in the fuel.The latent heat of steam at ordinary temperature may be taken as 587cal/g

22 contd Net calorific value=Gross calorific value-Latent heat of water vapours NCV=GCV-weight of hydrogen x 9 x Latent heat of water vapours Latent heat of water vapours is 587 kcal/kg

23 Calculation of Net calorific value Hydrogen in the fuel reacts with oxygen to give water H 2 + 1/2 O 2 → H 2 O 2H = 1/2O 2 = H 2 O 2parts = 16parts = 18parts 1parts = 8parts = 9parts

24 Contd Let H is the percentage of hydrogen in the fuel Amount of water produced by burning unit mass of fuel=9H/100 g Latent heat of steam=587cal/g Amount of heat produced by condensation of steam=9H/100 x587 cal NCV=[GCV-9H/100 x 587] =[GCV-0.09 x 587] cal/g

25 2. MODERATE IGNITION TEMPERATURE: Ignition temperature: the lowest temperature to which fuel must be preheated so that it starts burning smoothly. If ignition temp. is low, the fuel catches fire easily. Low ignition temperature is dangerous for storage and transportation of fuel. High temperature causes difficulty in kindling. So,a good fuel should have moderate ignition temperature.

26 3.LOW MOISTURE CONTENT: A good fuel should have low moisture content as moisture content reduces the calorific value.

27 4.LOW NON-COMBUSTIBLE MATTER CONTENT A good fuel should have low contents of non-combustible material as non-combustible matter is left in form of ash which decreases the calorific value of fuel

28 5.MODERATE RATE OF COMBUSTION: The temperature of combustion of fuel depends upon the rate of combustion. If the rate of combustion is low,then required high temperature may not be reached soon. On the other hand,too high combustion rate causes high temperature very quickly.

29 6.MINIMUM SMOKE AND NON- POISONOUS GASES On burning, Fuel should not give out objectionable and poisonous gases. In other words, gaseous products should not pollute the atmosphere. Gases like CO,SO 2,H 2 S etc. are some of harmful gases.

30 7.CHEAP: A good fuel should be cheap and readily available. 8. EASY TRANSPORTATION : A good fuel should be easy to handle and transport at low cost

31 9.CONTROLLABLE COMBUSTION : Combustion of fuel should be easy to start or stop when required. 10.NON SPONTANEOUS COMBUSTION: Combustion of fuel should be non-spontaneous otherwise it can cause fire hazards.

32 Contd. 11.LOW STORAGE COST :A good fuel should be easily stored at low cost.

33 Let us discuss few multiple choice questions Que1.Agood fuel possess: a.High ignition temperature b.Moderate ignition temperature c.High calorific value d.Both (b) and (c) Ans (d)

34 Que2.An example of primary fuel is : a. wood charcoal b.Coke c.natural gas d.petrol Ans. (C)

35 Que3.The minimum temperature at which substance ignites and burns without further addition of heat from outside is called: a. ignition temperature b.flash point c.transition temperature d.all the above Ans (a)

36 Que4.In a good fuel percentage of carbon is: a. low b.high c.moderate d.zero Ans(b)

37 Que5.Combustion of fuel involves chemical reaction between fuel and a.Hydrogen b.Nitrogen c.Oxygen d.Chlorine Ans (c)

38 Que6. The reaction in which heat is absorbed is called a. Exothermic b.Endothermic c.Exegonic d.none of these Ans (b)

39 Que7.Fuel can be defined as a substance which produces heat by a. combustion b.Reduction c. None of these d.All of above Ans(a)

40 Que8.The combustion reaction C+O 2 → CO 2 is a. Exothermic b.Endothermic c.Autocatalytic d.none of these Ans (a)

41 Que9.Which of following constituent of fuel does not contribute to its calorific value? a. hydrogen b.sulphur c.nitrogen d. None of these Ans(c)

42 Que10.A good fuel should have following characteristics: a.Moderate ignition temperature b. High calorific value c.Low moisture content d. all of these Ans (d)